2. Room Board
  3. Linear Refrigeration Cabinet
Linear Refrigeration Cabinet

Room Board Linear Refrigeration Cabinet User manual

  • Hello! I've reviewed the assembly instructions for the Linear Refrigeration Cabinet. This document includes detailed steps on how to assemble the cabinet, install the refrigerator, and attach the door and drawer panels. I'm ready to answer your questions about the assembly process or other details in the instructions. Please feel free to ask!
  • What tools are recommended for assembling this product?
    How many people are recommended for assembly?
    What is included in the product components?
ASSEMBLY INSTRUCTIONS
Keep these instructions for future use
LINEAR REFRIGERATION CABINET
800.486.6554 | roomandboard.com 3/28/23
Recommended Tools and Materials
• Screwdriver or power drill
• Quick-clamp
• #2 Square Driver Bit
Note: We recommend assembling this product with two people.
This Product Includes
A. Cabinet
B. Shipping support crossbar
C. Shipping screws (x4)
D. Refrigerator
E. Refrigerator cover panel
F. Allen wrench
G. Allen bolts (x4)
H. Washers (x4)
Please reference the included True Refrigeration Install Guide
& User Manual for important warnings.
CAUTION
fully assembled
800.486.6554 | roomandboard.com 3/28/23
1Screw the wood case onto the base. Adjust the base’s leveling foot as necessary, if present.
Insert refrigerator. Screw the leveling feet all the way into the refrigerator so that it is at the lowest
possible height. With the cabinet near its final position but far enough away from the wall to
access the its back, slide the refrigerator into the cabinet.
2
Insert refrigerator
Thread the leveling feet all the way into the refrigerators , so that it is at the lowest possi-
ble height.
With the unit near its nal position, and away from the wall enough for the installer to
access the back of the cabinet, slide the refrigerator into place.
Attach base to the case
Adjust center leveling foot as necessary, if present
Attach door panel place pull on door face
Visually align the refrigerator cover panel (hardware side up) with the doors/drawers to
the left of the refrigerator and evenly centered within the space. With a clamp or a rm
grip, hold the door in place while gently opening it. Have a second person mark at least
one drilling location through the L-brackets on the top and bottom of the refrigerator
door. Marks on the backside of the door indicate approximate mounting locations. The
mounting holes on the L-brackets are slotted for more ne tune adjustment. Properly
position the door with one screw on each L bracket before screwing in the remaining
screws.
Secure refrigerator. Bolt the refrigerator in place using the included allen wrench, 4 allen bolts
and 4 washers. The bolts go through the 4 vertical slots in the back of the cabinet which should
align with the threaded inserts on the back of the refrigerator.
3
800.486.6554 | roomandboard.com 3/28/23
Instructions for door panel. Visually align and center the cover panel on the refrigerator
door with the hardware side up. With a clamp or very firm grip, hold the panel in place while
gently opening the door. Have a second person mark at least one drilling location through the
L-brackets on the top and bottom of the refrigerator door. There are marks on the back side of
the panel to indicate approximate mounting locations, and the mounting holes in the L-brackets
are slotted for fine-tuning the panel’s placement. Properly position the cover panel on the door
with one screw in each L-bracket before screwing in the remaining screws.
4a
Bolt refridgerator in place
Use the inlcuded allen wrench, 4 allen bolts, and 4 washers to fasten the refridgerator to
the back fo the cabinet through the 4 vertical slots that align with the threaded inserts on
the back of the refridgerator.
800.486.6554 | roomandboard.com 3/28/23
Add stone top. With two
people, gently set the stone
top (with bumpers axed)
on top of the cabinet.
Add stone top with bumpers axed onto top
5
Attach 2-door panel
Instructions for 2-drawer panels. Open each drawer and peal back the rubber gaskets around
the perimeter of the drawer backsides, then close each drawer. While each drawer is closed,
visually align the drawer cover panels with the other doors and drawers of the cabinet, keeping
the sides with the grooved handles facing up. With clamps or a very firm grip, hold the cover
panels in place on the drawers and gently open the drawers. Then, use the included wood
screws to secure the drawer cover panels by screwing through the recessed gasket channels
and into the drawer cover panels. Press the rubber gaskets back into place when complete.
4b
Note: We recommend
only screwing one or two
attachment points first before
adding all screws, so as to
ensure a perfect placement.
Open each drawer and peal back the rubber gasket around the perimeter of
the backside of each drawer. Use the included wood screws to attach the
wood drawer front by screwing through the recessed gasket channel and
into the wood drawer front.
Press the rubber gasket back into place when complete.
/