2. PDi
  3. PD168-080 Articulating Arm
PD168-080 Articulating Arm

PDi PD168-080 Articulating Arm Operating instructions

  • Hello! I've reviewed the instructions for the PDi PD181-700 articulating arm and PD181-677 adapter plate. This document outlines the necessary steps, tools, and safety precautions needed to properly install the mount. I'm ready to answer any questions you have about the installation process or any other specifics noted in the document.
  • What is the maximum weight capacity of this mount?
    What tools are required for the installation?
    What is the first step in the installation?
MODEL NUMBER: PD168-080
Document Number:
PD196-430R1
PD181-700 Articulating Arm with Adaptor Plate
Page 1 of 1
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
SCOPE:
To mount a PD181-700 arm to a PDI-A32A TV using a PD181-677 adapter plate.
Note: The maximum capacity for this mount is 30 pounds.
TOOL LIST:
1. P1 or P2 Phillips Screwdriver
2. Safety Glasses/Goggles
SAFETY STEPS:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products
BILL OF MATERIAL:
Item
Part Number
Description
QTY
1
PD181-677
200mm to 100mm Adapter Plate
1
2
PD181-700
Wall Mount
1
3
PDIPPHMSM4X76
Screw, Phillips Pan Head, M4-0.7 x 6mm
4
4
PDIPPHMSM6X110
Screw, Phillips Pan Head, M6-1 x 10mm
4
PROCEDURE:
STEP 1:
Attach the adapter plate, PD181-677 (#1) to the TV using four (4) screws, PDIPPHMSM6X110, (#4)
STEP 2:
Attach the mount, PD181-700, (#2) to the wall following the included instructions and fasteners.
STEP 3:
Attach the plate, PD181-677, (#1) to the mount, PD181-700, (#2) using four (4) screws, PDIPPHMSM4X76, (#3).
/