2. Vivo
  3. DESK-AC03B
DESK-AC03B

Vivo DESK-AC03B User manual

  • Hello, I'm your chat assistant. I've analyzed the instruction manual for the VIVO Under Desk Drawer DESK-AC03B. It includes steps for assembling, mounting, and provides safety warnings. I can help you by answering questions about its assembly, dimensions, and included components. Feel free to ask!
  • What tools are needed for assembly?
    What is the recommended mounting position?
    What is the minimum thickness of the desk?
Black Pull Out 18” Under Desk Drawer
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-ac03b
SKU: DESK-AC03B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
WARNING!
Phillips
Screwdriver
B (x2)
Brackets
D (x4)
M5X15 Screw
STEP 1
Assemble Brackets (B) to Drawer (A) using M6x8 Screws (C). Tighten with a
Phillips screwdriver.
11lbs
(4.99kg)
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A (x1)
Drawer
C (x4)
M6x8 Screw
Drill
3
Determine mounting location for Drawer (A). We recommend positioning the
housing 19mm (3/4”) back from the edge of the mounting surface. The desk
should be at least 18mm (11/16”) thick.
Using the housing from Drawer (A) as a guide, mark drilling locations with a
pencil, and drill pilot holes using a 3/32” drill bit. Mount the drawer housing
to surface using M5x15 Screws (D) and a phillips screwdriver. Insert the drawer
back into the housing.
≥18mm
STEP 3
STEP 2
Slide Drawer (A) open and locate the black levers located on either side in the track. Li up
on the le lever, and press down on the right lever to remove the drawer from the housing.
D
RIGHT SIDE
LEFT SIDE
Drawer
Housing
A
Drawer
Housing
483mm
150mm
19mm
108mm
LAST UPDATED: 05/11/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/