Vivo DESK-SF01W Assembly Instructions

Brand: Vivo

Model: DESK-SF01W

Type: Assembly Instructions

White Wall Mounted 28” Desk with Drawer

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/desk-sf01w

SKU: DESK-SF01W

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3

STEP 2

Insert x2 Cam Lock Screws (M) into front of Rear Panel (B) as shown. Insert x4 Wood Dowel

Pins (N) into top and sides of Rear Panel, and x4 Pins into rear and sides of Bottom Panel (C).

Assemble Rear Panel to Bottom Panel.

PACKAGE CONTENTS

TOOLS NEEDED

22lbs

(9.98kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING!

Phillips

Screwdriver

A (x1)

Desktop

B (x1)

Rear Panel

C (x1)

Bottom Panel

D (x1)

Rear Drawer

Panel

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

Drill

Level

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.

ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS

STEP 1

Pull open Slider (K), then attach Slider to Le Panel (I) using x2 Screws (P), making sure the

arrow is pointing towards the front. Repeat for Right Panel (J).

E (x1)

Floor Panel

F (x1)

Front Drawer

Panel

G (x1)

Le Drawer

Panel

H (x1)

Right Drawer

Panel

I (x1)

Le Panel

J (x1)

Right Panel

K (x2)

Slider

L (x2)

Corner Brace

M (x32)

Cam Lock Screw

N (x24)

Wood Dowel Pin

O (x32)

Cam Lock Nut

P (x18)

Screw

W-A (x2)

Wall Screw

W-B (x2)

Concrete Anchor

W-C (x2)

Washer

CAUTION!

DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO

MOUNT. We include mounting hardware for brick and concrete walls. If unsure, please contact us at

vivo-us.com, email at [email protected], or call us at 309-278-5303.

STEP 7

Insert x6 Cam Lock Screws (M) into bottom of Desktop (A). Place Desktop onto frame assembly.

STEP 8

STEP 9

Insert x2 Cam Lock Screws (M) into front of Rear Drawer Panel. Insert x2 Wood Dowel Pins

(N) into sides of Rear Drawer Panel, and x6 Pins into edges of Floor Panel (E). Assemble Rear

Drawer Panel to Floor Panel.

Insert x2 Cam Lock Nuts (O) into Le Panel (I), x2 Nuts into Right Panel (J), and x2 nuts into

Rear Panel (B). Turn all Nuts clockwise using a Phillips screwdriver to secure Desktop (A).

STEP 3

Insert x4 Cam Lock Screws (M) into Le Panel (I), and x2 Wood Dowel Pins (N) into top of Le

Panel. Repeat for Right Panel (J). Assemble Le and Right Panels to previously assembled

Rear and Bottom Panels (B, C).

STEP 5

Remove covers from Corner Braces (L).

STEP 4

Insert x6 Cam Lock Nuts (O) into top of Bottom Panel (C) and x4 Nuts into back of Rear Panel

(B). Turn all Nuts clockwise using a Phillips screwdriver to lock Panels together.

STEP 6

Attach Corner Braces (L) to Le and Right Panels (I, J) using x8 Screws (P).

STEP 13

OPTION A: Wood Wall

Installation

Place Desk against wall

and mark drilling locations

through Corner Braces (L).

Use of a level and stud finder

is highly recommended. If

mounting holes do not align

with studs, we recommend

mounting a solid wood panel

to the wall so the desk may

be fully supported.

Using a 3/16” drill bit, drill

holes 2.2” deep into marked

locations. Mount desk to

wall using Wall Screws (W-A)

and Washers (W-C).

STEP 14

Pull Sliders (K) all the way forward.

Secure assembled drawer to Sliders

using x4 Screws (P). Push drawer back

into desk.

STEP 10

Insert x4 Cam Lock Screws (M) into Right Drawer Panel (H) and x1 Wood Dowel Pin into front.

Repeat for Le Drawer Panel (G). Insert x6 Cam Lock Screws into Front Drawer Panel (F).

STEP 11

Assemble Le and Right Drawer Panels (G, H) to previously assembled Floor and Rear Drawer Panels

(D, E), then assemble Front Panel (F) to drawer.

STEP 12

Insert x16 Cam Lock Nuts (O) into Rear, Le, Right and Floor Panels of drawer. Turn all Nuts

clockwise with a Phillips screwdriver to lock assembled drawer together. Do not assemble

drawer to desk at this time.

OPTION B: Brick/Concrete Wall

Installation

Place Desk against wall and mark

drilling locations through Corner

Braces (L). Use of a level is highly

recommended.

Using a 3/8” drill bit, drill holes 2.4”

deep into marked locations, then

insert Concrete Anchors (W-B) into

holes. Mount desk to wall using Wall

Screws (W-A) and Washers (W-C).

√

1 2

W-A

W-C

ø 4.5 m

ø 10 m

W-A

W-C

W-B

√

1 2

NOTE: Do not use Concrete Anchors

(W-B) with wood walls.

LAST UPDATED: 03/04/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected]

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Vivo DESK-SF01W Assembly Instructions

Vivo DESK-SF01W Assembly Instructions

Vivo DESK-SF01W Assembly Instructions

Related papers

Other documents