2. CLUB3D
  3. 795218
795218

CLUB3D 795218 Installation guide

  • Hello! I've reviewed the Quick Installation Guide for the Club 3D CAC-1336 Active Adapter. This document outlines how to connect your HDMI source to a USB Type-C display, offering support for high resolutions up to 4K 120Hz or 8K 30Hz. It also explains the power requirements for this device. I'm ready to assist you with any questions you might have about setting up or using this adapter.
  • What resolutions does the adapter support?
    Does a display needs to support some mode?
    Does the adapter need external power?
    What kind of connector should be used to provide power via USB?
CAC-1336 QUICK INSTALLATION GUIDE
INSTALLATION: Simply connect the cables as shown below.
CAC1335 QIG June-2022
Thank you for purchasing our CAC-1336 Product.
After unpacking the product, please make sure you have all the items provided and checked for any damages.
In case of any missing/damaged parts please inform your supplier immediately.
You should have:
• 1x CAC-1336 HDMI™+ Micro USB to USB Type-C 4K120Hz or 8K30Hz M/F Active Adapter
• 1x USB A to Micro USB Power Cable 1 m/3.28 ft
Supports resolutions up to 3840x2160/120Hz or 7680x4320/30Hz: Display must support USB C DisplayPort Alternate mode.
ONLY games which are designed for 4K120Hz will provide this experience !
HDMI™+ Micro USB to USB Type-C 4K120Hz or 8K30Hz M/F Active Adapterr
+ Micro USB Power Cable 1 m/3.28 ft
Disclaimer:
While we endeavor to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights claimed on the content of this document.
Please refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.
Copyright © 2022, Club 3D B.V. www.club-3d.com
Micro USB for Power to CAC-1336
Output: To Display
Input: Source
HDMI™ MALE
Connect your USB Type C Cable
To the CAC-1336
USB A / Micro USB
Power Cable*
USB Type A for external power.
* Included: a USB A to Micro USB
Power Cable 1 m/3.28 ft
D IS PL AY
SOURCE
** Connect a power adapter or computer to the USB Type A plug to supply power for the adapter.
Please check whether your external power source supports 5V / 1.5A (7.5W).
CAC-1336 + USB A to Micro USB Power Cable 1 m/3.28 ft
1. Connect Source to your HDMI™ Device 2. Connect your USB Type-C Cable to Display
3. Connect the Power Cable with the Micro USB Connector to the CAC-1336 4. Connect the USB Type A Connector with a USB Power**
Micro USB Power
USB Type C
DISP L AY
SOURCE
/