Club 3D CAC-1921 Quick Installation Guide

Brand: Club 3D

Model: CAC-1921

Category: Mobile device chargers

Type: Quick Installation Guide

Thank you for purchasing our CAC-1921 Product. After unpacking the product, please make sure you have all the items

provided and checked for any damages. In case of any missing/damaged parts please inform your supplier immediately.

You should have:

• CAC-1921 Notebook / Laptop Car Charger 36 Watt

• QIG, Quick Installation Guide (or download link)

The Club 3D CAC-1921 is a high-performance and fashionable

design max. 36Watt Car charger with QC3.0 and Power

Delivery (PD) support. With this charger, it is feasible for

you to charge any devices (eg: digital cameras, PDAs,

notebook computer, mobile phones, USB accessories) with

your car when it is in necessity. It is equipped with three USB

connectors (one USB Type-C connector and two USB Type-A

connector) for power. This product allows three devices to

be charged at the same time, and the product provides the

maximum output of 36 watts. The USB-C port is specially

designed for Type-C supported devices.

Ensuring busy travelers can stay productive on the move

without waiting around for hours. Built-in safeguards protect

your devices against excessive current, overcharging and

overheating(OCP-OTP-SCP-OVP).

Operation Procedures

1. Plug the Car Charger into the car cigarette lighter Observe

LED light turns On.

2. Connect your device(s) to the output port for charging.

3. Please unplug the car charger after the electronic

equipment is fully charged.

WARNING:

1. Please plug the car charger after starting the car.

2. Please pull the car charger out after use or car ﬂameout.

Note: Our products have protection functions, and the two

tips above are suggestions just for safety.

3. Do not use the car charger with electronic products which

own over-charging speciﬁcations, so as to avoid any

problems caused by speciﬁcation mismatching.

4. Car charger will be a little heated in the use process, and it’s

a normal phenomenon that the temperature is less than

60 degree Celsius or 140 Fahrenheit under normal room

temperature.

5. Please make sure that you use USB cables with the correct

Power rating for this product ! Cables with lower power

rating will cause slow charging ! Please consult your Club

3D representative for the correct cable.

6. When the car charger stops working under over-current,

over-temperature or short-circuit protection, please

unplug the device after it automatically returns to work,

then you need to check whether the device is compatible

with this charger.

7. Do not let the car charger close to ﬁre, such as stove,

candles etc.

8. Do not let the car charger soak into liquid, such as

swimming pool, bathtub, etc.

9. Do not wash the car charger with corrosive cleaner.

10. If the car charger cannot work properly, please contact your

supplier from whom you purchased this product.

Warning Safe Usage – Product Only to be used at altitude 2000 meters/6562 feet and below.

LED Light

Connect the CAC-1921 plug

in to your Car Cigarette Lighter

socket (12-24Volt DC)

USB-C

USB-A (1)

USB-A (2)

Please use USB cables with the correct Power rating

WARNING:

A. Please plug the

car charger after

starting the car.

B. Please pull the car

charger out after use

or car ﬂameout.

CAC-1921 QUICK INSTALLATION GUIDE

Disclaimer: While we endeavour to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors.

Therefore Club 3D does not accept any rights claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com. All other brand names

Club 3D CAC-1921 Quick Installation Guide

Brand: Club 3D

Model: CAC-1921

Category: Mobile device chargers

Type: Quick Installation Guide

Download PDF

report

Club 3D CAC-1921 Quick Installation Guide

Club 3D CAC-1921 Quick Installation Guide

Related papers

Other documents