Club 3D CSV-1384 Quick Installation Guide

Brand: Club 3D

Model: CSV-1384

Type: Quick Installation Guide

Club 3D CSV-1384 is a versatile HDMI™ 2-in-1 Bi-directional Switch that offers flexible connectivity options for your home entertainment or professional setups. Here's a brief overview of its capabilities:

2-in-1 Functionality: This switch can operate in two modes:
- Switch Mode: Connect two HDMI™ sources to the switch and toggle between them to display on a single HDMI™ display.
- Splitter Mode: Connect a single HDMI™ source to the switch and distribute the signal to two separate HDMI™ displays.
High Resolution Support: The switch supports video resolutions up to 8K60Hz or 4K120Hz, ensuring crystal-clear and smooth visuals.

2-in-1 Functionality: This switch can operate in two modes:
- Switch Mode: Connect two HDMI™ sources to the switch and toggle between them to display on a single HDMI™ display.
- Splitter Mode: Connect a single HDMI™ source to the switch and distribute the signal to two separate HDMI™ displays.
High Resolution Support: The switch supports video resolutions up to 8K60Hz or 4K120Hz, ensuring crystal-clear and smooth visuals.

CSV-1384 QUICK INSTALLATION GUIDE

CSV-1384 QIG October-2023

Thank you for purchasing our CSV-1384 Product. After unpacking the product,

please make sure you have all the items provided and checked for any damages.

In case of any missing/damaged parts please inform your supplier immediately.

You should have:

• 1X CSV-1384 HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz

• QR Code for downloading the Quick Install Guide (QIG)

HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz

Disclaimer: While we endeavour to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Products might obtain a certiﬁcation during their lifetime. This doesn’t

change or alter the product speciﬁcations and/or performance in any way. Club 3D will provide the updated information on their website www. Club-3d.com at her discretion. Therefore Club 3D does not accept any rights claimed on the content of this document. Please

refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.

The Club 3D CSV-1384 is a HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz.

It can switch either of two sources to one display or switch one source to either of two

displays. Press the switch button to select channel 1 or channel 2. With a piece of 50cm

length ﬁxed HDMI™ cable (pigtail), this Switch not only reduces cost but also saves time

for customers. This kind of HDMI™ Switcher routes high deﬁnition video (in multiple

resolutions and up to 8K60Hz) and digital audio from the sources to display units.

Features

• HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz, it can

switch either of two sources to one display or switch one source

to either of two displays

• Support video resolution up to 7680x4320P@60Hz

• Support HDR

• HDCP pass-through

• support HDMI™2.1

• The toggle button can quickly switch between 2 video sources

or 2 monitors,and the blue LED indicators on both sides indicate

which port is chosen to work.

• It’s suggested to match a HDMI™2.1 cable whose length is better

within 3m/9.84 ft

Supported resolutions:

• Up to 8K60Hz or 4K120Hz Depending on source signal

Note:

- Please update your TV Firmware to the version which supports these

resolutions/refresh rates !

- Please update your Graphic drivers on your PC and make sure that DSC1.2 is

supported on your devices to support the these resolutions/refresh rates!

Please use one of our Extension/Adapter cables to connect to your devices: In

case you need assistance to choose the correct cable, please visit our website

www.club-3d.com or feel free to mail us at [email protected] and it will be

our pleasure to assist you.

• Warning Safe Usage – Product Only to be used at altitude 2000 meters/6562

feet and below

Operation Procedures:

1. Decide whether you are going to use this

product as a switch or as a splitter

2. Connect the HDMI™ source(s) and HDMI™

display(s) respectively to the input and

output ports of the product through HDMI™

Male/Male cables

3. When powered up the switch will default to

channel 1

4. You can now switch to the desired channel

Note(s):

• When powered up the switch will default to

channel 1

• * It’s suggested to match a HDMI™2.1 cable

whose length is not exceeding 3m/9.84 ft,

when in doubt Please consult your Club 3D

representative for support

• The above data is obtained from the internal

laboratory of Club 3D, the speciﬁc optimal

cable length is subject to the actual situation.

How it works: From  To / To  From

Switch 1 source to

one-OR-the-other

connected displays

INPUT: 1x HDMI™ Source device

C A C-1 3 0 8

INPUT: 2x HDMI™ Sources

Alternative

OUTPUT: 1x HDMI™ videoOUTPUT: 2x HDMI™ video

(supports 8K)(supports 8K)

HDMI Cable not included, for illustration purposes only!

Switch either of

Two Sources

to One Display*

Toggle

button

Toggle

button

Alternative

➊

➋

➌

➍

➊

➋

➌

➍

Toggle button

Led indicator 1 Led indicator 2

Club 3D CSV-1384 Quick Installation Guide

Brand: Club 3D

Model: CSV-1384

Type: Quick Installation Guide

2-in-1 Functionality: This switch can operate in two modes:
- Switch Mode: Connect two HDMI™ sources to the switch and toggle between them to display on a single HDMI™ display.
- Splitter Mode: Connect a single HDMI™ source to the switch and distribute the signal to two separate HDMI™ displays.
High Resolution Support: The switch supports video resolutions up to 8K60Hz or 4K120Hz, ensuring crystal-clear and smooth visuals.

Download PDF

report

Club 3D CSV-1384 Quick Installation Guide

Club 3D CSV-1384 Quick Installation Guide

Related papers

Other documents