havit Freego1 Operating instructions

Freego 1 Product specification



Producthostandaccessories

1headset,1chargingcable(Type‐Chead)



Productstructuredescription(graphic):

Add a sentence after the picture:

Note: The pictures in this manual are schematic drawings, there may be deviation

from the actual, please refer to the actual

Basic function

Boot, Bluetooth pairing

(Please make sure your phone supports Bluetooth)

Step 1：

Long press the multi-function button of the headset for 3 seconds, the LED blue

light will be on for 1 second, and then the red and blue light will alternately

flash, and the headset will be turned on and automatically enter the Bluetooth

pairing state

Step 2:

Select "Freego 1" from the Bluetooth list of the phone for pairing. After the pairing

is successful, the blue light will flash once for 5s

Matters needing attention：

a) Pairing mode lasts for 3 minutes, if you do not pair during this period, the

headset will automatically shut down, if you need to reconnect, follow the above

steps to boot pairing

b) After the headset is turned on, it will automatically connect back to the last

connected mobile phone (Bluetooth is turned on) before it is turned off, and the

mobile phone does not need to search for the connection again

c) After the headset is turned on, it will automatically connect to the last

connected mobile phone (Bluetooth is on) before it is turned off. The effective

time is 10 seconds. If no connected device can be found within 10 seconds, the headset

will enter Bluetooth pairing mode and flash red and blue alternately

Power Off

Press and hold the multifunction button of the headset for 5 seconds. The red light

will keep on for 2 seconds and then turn off

Answer the phone

Press the multi-function key

End the call

Press the multi-function key

Reject a call

Hold down the multifunction button for 2 seconds

Voice assistant

Press 3 multifunction keys (e.g. siri, Xiao Ai)

Music playback

Play/Pause: Press the multi-function key to pause, and then press to play

Previous: Long press the volume plus button for 2 seconds

Next: Press and hold the volume down button for 2 seconds

Volume adjustment

Volume Plus: Press the volume plus button

Volume down: Press the volume down key

Charging

1. When the headphone battery is low, the LED blue light automatically turns red

(the red light flashes once in 5S), and is accompanied by a low electric sound prompt

2. 2, headset charging, LED red light long light, full charge, turn blue light long

light,

Resetting

When the headset is on (any), long press the plus/minus key for 4 seconds, no matter

whether the hand is released to enter the pairing state or not, the LED light will

blink for 3 times to reset successfully and turn to red and blue lights alternately

(the headset will not be turned off after reset).

Successfully paired LED light displays the status

1. When the headset battery is sufficient:

After the phone is successfully connected to Bluetooth, the default indicator is:

the blue light flashes once for 5 seconds.

Specification:

Headphone size: 142*100*47.5mm

Input specifications: 5V 1A

Bluetooth normal range: 10M

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,

pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection

againstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcan

radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,may

causeharmfulinterferencetoradiocommunications.However,thereisnoguaranteethat

interferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmful

interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff

andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing

measures:

—Reorientorrelocatethereceivingantenna.

—Increasetheseparationbetweentheequipmentandreceiver.

—Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris

connected.

—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

FCC Radiation Exposure Statement

ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolled

environment.

Thistransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaor

transmitter.

havit Freego1 Operating instructions

Other documents