LANYA ELECTRONIC ZG8BSH560 User manual

LANYA ELECTRONIC
Brand
LANYA ELECTRONIC
Model
ZG8BSH560
Type
User manual

This manual is also suitable for

LANYA ELECTRONIC ZG8BSH560 is a Bluetooth Stereo Headset designed to be convenient, stylish and provide high quality audio playback from any Bluetooth-enabled audio device or wired only device. It can be used to receive phone calls while in use and will automatically pause the audio playback in order to receive the call. When the call ends, audio playback will resume.

In addition to the standard features that you would expect from a Bluetooth headset, the LANYA ZG8BSH560 also has touch controls, which allow you to control your music and make calls without having to take your phone out of your pocket. It also has a built-in microphone, so you can use it for hands-free calling.

LANYA ELECTRONIC ZG8BSH560 is a Bluetooth Stereo Headset designed to be convenient, stylish and provide high quality audio playback from any Bluetooth-enabled audio device or wired only device. It can be used to receive phone calls while in use and will automatically pause the audio playback in order to receive the call. When the call ends, audio playback will resume.

In addition to the standard features that you would expect from a Bluetooth headset, the LANYA ZG8BSH560 also has touch controls, which allow you to control your music and make calls without having to take your phone out of your pocket. It also has a built-in microphone, so you can use it for hands-free calling.

User Guide & Important Information
BSH560 Bluetooth Stereo Headset
LANYA ELECTRONIC Co., Ltd.
2
CONTENTS
Product introduction ......................................................................... .........3
Contents.............................................................................................4
Button operation..........................................................................................5
Charging...........................................................................................6
Connection guide..................................................................................7
LED indicator.....................................................................................8
Basic operation ............................................................................9
Voice dialing...................................................................................16
Battery and charging notice.....................................................................17
Warnings..........................................................................................18
FCC Caution........................................................................................................19
Contact Us .........................................................................................................20
..... ..
PRODUCT INTRODUCTION
3
Thank you for buying the RaveTouch Bluetooth Stereo Head e from White Label.
These Head e are designed to be convenient , sty lish and provide high quality audio
Playback from any Bluetooth enabled Audio Device or wired only device.
Please read this user Guide thoroughly before use so that you can understand the setup
and functions.
The Bluetooth Stereo head e can also be used to receive tele ph one calls
while in use and will automatically pause the audio playback in order to receive the call and
when the call ends audio Playback will resume.
RaveTouch
s t
st
s t
CONTENTS
4
WhiteLabel RaveTouch USB Cable
Bluetooth Stereo Headset
BUTTON OPERATION
5
1. Volume +
2. Volume -
3. Mic
4. 3.5mm Audio Input
5. LED Indicator
6. Folding Hinges
7. Multifunction
8. USB charging Port
9. Multi-touch Control
1
2
3
4
5
7
8
6
9
CHARGING
6
Use the USB cable connect with
headphone and PC to charge. When
the power is extremely low,need 3
hours to full charged. No need to
stop use the headphone when
charging,you also can listen music or
on the phone. In the charging can
directly identify the audio equipment
in the computer.
CONNECTION GUIDE
7
1. Wireless Bluetooth connection
a.Power on and press the Multifunction Button for 7 seconds to start pairing mode.
b.Open the mobile phone/tablet/laptop Bluetooth setting.
c.Search for Bluetooth device.
d.Select “RaveTouch” and connect.
e.You can play music after the connection is successful.
2. 3.5mm audio connection
Use the audio cable one end insert into the Headphones audio jack and
the other end insert into the device you are wanted to connect.
1
2
Three Methods
for Head es
Connection
t
LED INDICATOR
8
1. Power on : Blue light flash 3 times quickly
2. Power off : Red light flash 3 times quickly
3. Standby(not connected) ：Blue light flash one time every 5 seconds.
4. Standby(connected) : Blue light flash one time every 5 seconds.
5. Incoming call : Blue light flash quickly
6. During a Call : Blue light flash one time every 5 seconds.
7. Charging : Red light flash long
8. Fully charged: Red light switches off
9. Low battery alarm : Red light flash one time every 30 seconds.
.
.
.
.
.
BASIC OPERATION
9
Power off
Hold down the multifunction button for 3 seconds, blue light flashes 3 times and Head es
beep.
Pairing and connection
Power off sate, hold down the multifunction button for 7 seconds until blue and red light flash
alternately, use the mobile phone/tablet/computer to search the Bluetooth device and
connect, the Head es beep after the connection is successful.
Answer a call
When there is an incoming call, press the multifunction button and Head es beep.
t
t
t
BASIC OPERATION
10
Reject a call
When there is incoming call, press multifunction button for 2 seconds and the Head es beep.
Switch call from Head e to Phone
During a call, press the multifunction button for 2 seconds, the call will be transferred to
mobile phone. Using the same method, the call can transferred back to the Head es .
Voice dialing
Standby mode, double click the multifunction button.(the mobile phone need support this
function)
End call
Short press the multifunction button and Head es beep.t
t
s t
t
BASIC OPERATION
11
Mic mute
During a call, press volume(-) button for 2 seconds and the Head es beep, opposite side
can’t hear your voice. Using the same method can recover the microphone voice.
Playback Controls
1. line in cable: Insert line in cable and the Bluetooth connection will stop, open the mobile
phone music player can play music.
Redial the last dialed number
Standby mode, press volume(+) button for 3 seconds and Head es beep.
2. Volume adjust: Short press volume(+) button can increase volume, short press volume(-)
button can decrease volume (Minimax value prompt)
t
t
BASIC OPERATION
12
3. Play /pause:When play music, short press multifunction button can play/pause music.
4. last/next track:When playing music, hold down the volume(-) button can Skip tack
backwards, Hold down the volume(+) button can play the next track.
Battery indicator
Connected with iPhone or iPad can show the Bluetooth head e Battery charge level.s t
NFC pairing
Power on state, put the mobile phone NFC touch with the Bluetooth headphone NFC, the
Headphones will be connected automatically.
BASIC OPERATION
13
4. Next track:Two fingers horizontal swipe down(Figure 4).
5. Previous Track:Two fingers horizontal swipe Up(Figure 5).
Touch Controls
The following functions can be controlled with the touch control function by making the
following gestures by touching the left Head e outside face:
1. Play pause:Single finger touch(Figure 1).
2. Volume up:Single finger swipe up, swipe more to reach maximum volume(Figure 2).
3. Volume down:Single finger swipe down, swipe more to reach minimum volume(Figure 3).
ts
BASIC OPERATION
14
(Figure 5)(Figure 4)(Figure 3)(Figure 2)(Figure 1)
BASIC OPERATION
15
Auto power-off
Lost connection for 10minutes or the battery voltage below 3.0V,the Headphones will
automatically power off, red light flash 3 times and Head es beep.
Manual power-off
Hold Down the Multifunction Button for 6 seconds, red light flash 3 times and Head es
beep.
Automatic quit pairing mode
When there is no pairing competed within 3 minutes the pairing mode will automatically stop.
t
t
16
VOICE DIALING
If speech recognition to open and use a hands-free set connect Head es , you can make a
call directly from the headset using voice recognition.
1.Double click the multifunction button, You will hear a voice boot prompt.
2.Say the name of the person you wish to call loudly.(Note: the mobile phone need support
this function)
t
BATTERY CHARGE/LOW VOLTAGE ALARM
17
When the head e is charging, the red light flashes slowly. Red light turns off when the
head is fully charged. Usual charge time is 2-3 hours.
When the red light flash one time every 30 seconds and have a warning sound it is means the
battery is run out and need to charge soon.
s t
e s t
WARNINGS
18
Avoid placing this product near extreme temperatures or humidity.
Do not use this product while operating a motor vehicle
Do not submerse or allow this product to come into contact with water. Use in dry locations
only.
• An adult should supervise young children when using this product.
• Use of any attachment or accessory with this product not recommended or sold by White
Label may result in risk of fire, electrical shock or injury to persons or product.
Do not clean any parts with alcohol, cleaning solutions containing alcohol or strong abrasives.
Use a soft cloth and a little water
There are no user serviceable parts within this product. Tampering with this product will
invalidate your White Label warranty.
•
•
•
•
•
19
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to
operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

LANYA ELECTRONIC ZG8BSH560 User manual

LANYA ELECTRONIC
Brand
LANYA ELECTRONIC
Model
ZG8BSH560
Type
User manual
This manual is also suitable for

LANYA ELECTRONIC ZG8BSH560 is a Bluetooth Stereo Headset designed to be convenient, stylish and provide high quality audio playback from any Bluetooth-enabled audio device or wired only device. It can be used to receive phone calls while in use and will automatically pause the audio playback in order to receive the call. When the call ends, audio playback will resume.

In addition to the standard features that you would expect from a Bluetooth headset, the LANYA ZG8BSH560 also has touch controls, which allow you to control your music and make calls without having to take your phone out of your pocket. It also has a built-in microphone, so you can use it for hands-free calling.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents