AND MPA / MPB Series User manual

Brand
AND
Model
MPA / MPB Series
Type
User manual
1WMPD4002895D
Ejector sleeve
MPA-10/20
MPA-200
MPB-200-8
MPA-1200/10000
MPB-1200-8
＊
The figure is MPA series
＊
The figure is MPB series
Aspirating and dispensing
Battery mark
Resetting key
Back ke
y
Enter ke
y
Down key
System setting mode
Standard mode
Multiple dispensing
mode
Mixing mode
Up key
(Front view)
Down key
Display
Eject button
Resetting key
Electrode (+) for charging stand
Main body (Made of ABS)
Impact-absorbing pad
Up key
Enter key
Back key
Ejector (Made of PP)
(
Glass fiber is contained with 20%
)
Tip holde
r
(Made of PVDF)
Battery cove
r
Operation key
Finger hook
Connection nut
Power connector(Mini USB)
Battery cove
r
release button
Space to label
the name sticker
Lower part of
main body
Power connector cove
r
Electrode (-) fo
r
charging stand
(Side view and rear view)
Remo
able for
autoclave
(121
℃
2 atm
20 minutes)
SINGLE CHANNEL ELECTRONIC PIPETTE
MPA-10 / 20 / 200 / 1200 / 10000
QUICK OPERATION GUIDE
MULTI CHANNEL ELECTRONIC PIPETTE
MPB-200-8 / 1200-8
When illuminated:
User CAL operation.
When flashing:
When selecting the mg unit.
Lower part of
main body
Red
Yellow
Blue
Display of number
and a number of times
Pipetting amount
display
Buzzer mark
Blowout mark
Reverse operation mark
Notice mark
1WMPD4002895D
Example of the function and operation
In operating procedure on this page,
means Back key, means UP/Down key,
means Enter key and means
Operation key. Press these keys when
operating.
Additional contents
(The following example is when using MPA-200.)
Standard mode
(
AUTO
)
(100μL)
(Aspirating)
V
olume calibration function
(μL calibration function)
Press
and
hold
(190μL)
(Dispensing) (Blowout operation)
Example: When dispensing with the
dispensing volume of 100μL
Example: When calibrating the dispensing
amount to 190μL
Multiple dispensing mode (MD)
Example: When multiple dispensing of 40μL
×3 times = 120μL
(40μL)
(
Aspirating:
120
μ
L
)
(03)
(Dispensing:
40
μ
L
)
(Dispensing:
40
μ
L
)
(Dispensing:
40
μ
L
)
(Reverse
o
p
eration
)
Initializing the volume calibration
(init)
Press
and
hold
(y)
Example: When initializing the dispensing
amount calibrated
Mixing mode (MIX)
System setting mode (SYS)
Example: When mixing with 100μL five times
(05)
(100μL)
(
Mixing
o
p
eration
)
Example:
When changing the unit of the
dispensing amount to a unit of weight
(mg)
Press
and
hold
Example: When calibrating the dispensing
amount to 190mg
Press
and
hold
(190mg)
Example: When setting the nuzzer to OFF
Dispensing in a unit of weight (in mg unit)
Weight calibration function (mg calibration function)
  • Page 1 1
  • Page 2 2

AND MPA / MPB Series User manual

Brand
AND
Model
MPA / MPB Series
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents