Whirlpool KGE PL 941 A++ IO Program Chart

KGE PL 941 A++ IO
Whirlpool
Brand
Whirlpool
Model
KGE PL 941 A++ IO
Category
Fridge-freezers
Type
Program Chart

This manual is also suitable for

A. Control panel
B. Refrigerator Compartment
1. Filter in fan
2. Lighting
3. Shelves / Shelf area
4. Multi-flow cold air system
5.
Cooler compartment (best for meat and fish) or
"Zero Degrees" box (to keep foods fresher for longer)
6. Rating plate with commercial name
7. Fruits and vegetables crisper
8. Crisper divider
9. Reversibility kit
10. Egg tray
11. Separator
12. Door trays
C. Freezer Compartment
13. Upper basket (freezing zone)
14. Ice tray and/or cold accumulator
15. Storage baskets for frozen food items
16. Door seals
17. The freezer door trays for pizza or other frozen
products with a short storage time (2** storage
compartment)
Anti-bacterial protection (depending on the model):
- Antibacterial filter in the fan (1)
- Antibacterial additives in the Crisper (7)
- Door seals are made of material able to inhibit bacterial
growth (16).
Notes:
- Depending on the model the number and type of
accessories may vary.
- In case of power failure the cold accumulator helps to
keep optimal storage temperature longer.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend on
the ambient temperature, frequency of opening the
doors, as well as location of the appliance. Temperature
setting must consider these factors.
- The appliance accessories are not suitable for washing in
dishwasher.
- After inserting food, ensure that the freezer
compartment door closes properly.
TO INCREASE STORAGE
The freezer compartment can be used without the
baskets to increase storage and for large products.
You can place the food products directly on the racks.
HYDROSENSE SHELVES
(depending of the model)
The special contour of the HydroSense shelves creates a
barrier that contain spills and simplifies cleanup,
preventing liquids from leaking onto shelves below.
HOW TO START THE APPLIANCE
Fit the spacers (if supplied) on the
upper part of the condenser at the
rear of the appliance. After plugging
the appliance to the mains, it starts
the operation automatically.
After starting the appliance, wait at least 4-6 hours before
placing food into the appliance .
Particular control elements are activated:
• The indicator LEDs on the control panels light up for 2
seconds.
• Activation of a beep for 1 second.
Note:
• If food is placed in the refrigerator before the appliance
has cooled completely, it may deteriorate.
CONTROL PANEL DESCRIPTION
(1) Cavity selection "Fridge / Freezer" pushbutton
(2) Green LED ON/OFF informing of:
- freezer cabinet temp. setting (green LED light ON)
- fridge cabinet temp. setting - (green LED light OFF)
(3) Temperature selection button "Temp.°C".
(4) (5) (6) Green LEDs indicating temperature settings.
(7) "Reset alarm" pushbutton.
(8) Internal light switch
Temperature Adjustment between
cabinets is made with the "Fridge /
Freezer" button (1). When the LED (2)
is OFF the user can select temperature in
the fridge.
The temperature in the refrigerator compartment
may be set by the temperature setting pushbutton (3) on
the control panel.
On the left there are described the 5
set points for the fridge
compartment. At each short
pressure of the "Fridge / Freezer"
button (1), the setpoint will change
(cyclically). The medium temp. is the
recommended temperature settings.
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Description:
LED OFF
LED ON
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
PRODUCT SHEET
GB
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
To adjust the temperature in the
freezer compartment, use the "Fridge
/ Freezer" button (1) to control the
temperature in the freezer cabinet. The
green LED (2) turns ON.
The temperature in the freezer compartment may
be set by the temperature setting pushbutton (3) on the
control panel.
On the left are described the 5 set
points for the freezer compartment
and fast freezing.
At each short pressure of the
"Fridge / Freezer" button (1), the
setpoint will change (cyclically).
The medium temp. is the
recommended temperature settings.
After setting the "Fast Freezing" (automatically disabled
after 24 hours) the freezer temperature is set to previous
displayed setpoints. When the product is disconnected
from the power supply and then reconnected, the
control unit remembers previously set temperatures for
freezer and refrigerator.
FAN WITH A BUTTON
The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation
of stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the "Fresh
Control" / "ProFresh" function can work and also when
the ambient air temperature is over 27 ÷ 28°C or if you
perceive drops of water on the glass shelves or in the
severe humidity conditions.
Note
Do not obstruct the air intake area with food
items.
When "Fresh Control" / "ProFresh" is disabled
remember to turn off the fan when there is a lower
ambient air temperature.
To turn off the fan press the button (1a).
If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box (found in the crisper drawer
(item 7) and insert into the cover of fan (item 1b).
The replacement procedure is attached with the filter.
“ZERO DEGREES” BOX
(depending on the model)
The "Zero Degrees" box is
specifically designed to maintain a
low temperature and a suitable
humidity level, in order to keep
foods fresher for longer (e.g.
meat, fish, fruit and winter
vegetables).
Activating and deactivating the box
The temperature inside the box, when active, is
approximately 0°.
The following factors are vital for the "Zero Degrees" box
to work properly:
- the refrigerator compartment must be switched on
- the temperature of the refrigerator compartment must
be between +2°C and +5°C
- the box must be inserted to enable activation
- no special functions must have been selected (Standby,
Cooling-Off, Vacation – where applicable).
If one of these special functions has been selected, the
"Zero Degrees" box must be deactivated manually, and
any fresh food inside it removed. If manual deactivation
does not take place, the box will be deactivated
automatically after 8 hours.
Note:
- if the symbol does not light up when the box is
activated, check that the box is properly inserted; if the
problem persists, contact your nearest authorized
After-sales Service
- if the box is active and the drawer open, the symbol on
the control panel may be deactivated automatically. If
the drawer is inserted, the symbol will become active
again
- irrespective of the state of the box, a slight noise may
be heard: this is normal and is not a cause for concern.
- when the box is not active, the temperature inside it
depends on the general temperature inside the
refrigerator compartment. In this case, we recommend
it is used to store fruit and vegetables which are not
sensitive to cold temperatures (fruits of the forest,
apples, apricots, carrots, spinach, lettuce, etc.).
Important: when the function is activated and there are
foodstuffs with a high water content, condensation may
form on shelves. In this case, disable the function
temporarily.
Removing the "Zero Degrees" box:
The "Zero Degrees" box can be removed to create more
space inside the refrigerator. In this case proceed as
follows:
- switch off the box
- pull out the drawer and the white plastic shelf
underneath the box.
Note: the upper shelf and the side supports cannot be
removed.
To restore "Zero Degrees" box operation, make sure you
replace the white plastic shelf underneath the box before
inserting the drawer and reactivating the function. To
optimise energy consumption, we recommend you
deactivate the "Zero Degrees" box and remove it.
Clean the box and all its parts regularly, using a cloth and
a solution of warm water and neutral detergent
PRODUCT SHEET
GB
To activate/deactivate the box, press
the button as illustrated in the figure.
When the box has been
activated, the symbol lights up.
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
fast freezing (Freezer)
Description:
LED OFF
LED ON
specifically formulated for refrigerator interiors (take care
not to immerse the white plastic shelf underneath the
box in water).
Before cleaning the box (including the outside),
remove the drawer so as to disconnect the box
from the electricity supply.
Never use abrasive detergents.
GUIDE TO SELECTING FUNCTIONS
Fast Freezing: For more efficient freezing activate this
function 24 hours before freezing fresh products.
- Select Freezer compartment by using button (1), LED
(2) shall turn ON.
- Press and hold the temperature setting button Te m p .
°C until 3 green LEDs light up simultaneously (4) (5)
(6).
After 24 hours place the food to be frozen in the upper
basket of the freezer compartment.
This function is automatically disabled after 24
hours. To deactivate it earlier follow the procedure:
- Press and hold by 3 sec. the temperature setting button
Te m p . ° C again while the LED (2) remains ON - the
temperature selection lights will return to previous
displayed temperature setpoint.
Reset alarm
If any alarm appears, the user could reset the acoustical
sound by pressing once Reset alarm pushbutton.
"Black-out alarm" (power supply failure) - in case of
power failure, the appliance automatically monitors the
temperature changes in the freezer compartment after
the power supply returns. The "Black-out alarm" will
activate, if the temperature has risen above the
admissible level. This is indicated by:
- Flashing of the green LED (2)
- Activation of a beep.
When the "Black-out alarm" is actived, it is
recommended to proceed as follows:
- If the food in the freezer is not frozen but is still cold,
transfer it promptly to the refrigerator compartment
and consume within 24 hours.
- If the food in the freezer is frozen, it has re-frozen after
thawing caused by the power failure. The consumption
of re-frozen food is not recommended because it has
lost its nutritive value and may be hazardous to your
health.
Note
The "Black-out alarm" does not guarantee the food
quality and its safety in case of consumption. It only
indicates the necessity to assess the quality of food in the
freezer and refrigerator compartments.
To deactivate the alarm, press once Reset alarm
pushbutton, the flashing of the green LED (2) go off.
- The temperature will return to the normal operating
cycle level and the beep will stop.
Door open alarm
When the refrigerator compartment door remains open
for more than 2 minutes, the beep is activated.
When the door is closed the product returns to normal
operation, the beep will stop.
Overtemperature alarm in freezer compartment.
Overtemperature alarm activation is indicated by:
- Flashing of the green lamps (4) (5) (6).
- Activation of a beep.
The alarm is activated when:
• The appliance is connected to the power supply for the
first time or after prolonged disuse.
• The freezer compartment temperature is too high.
• The quantity of foods loaded into the freezer exceeds
that indicated on the data plate
• The freezer door has been left open for a long time .
To deactivate the beep of the alarm, press Reset alarm
pushbutton. The flashing LED s (4) (5) (6) go off when
the minimum required temperature is reached.
"6th Sense" / "Green Intelligence" function
The "6th Sense" / "Green Intelligence" function helps
to maintain optimal conditions to storage of food and is
automatically activated when:
• a large amount of food is loaded into the freezer;
• the freezer door is left open for a long time;
• a prolonged power failure takes place, causing the
internal temperature of the appliance to increase to
values that cannot guarantee safe storage of food.
"Fresh Control" / "ProFresh"
The "Fresh Control" / "ProFresh" is activated by default
and is working only with Fan on. To disactivate the
"Fresh Control" / "ProFresh" function press for at least
3 sec. both buttons Cavity selection "Fridge / Freezer"
and "Temp.°C". A long sound signal will be provided for
the deactivation of the
"Fresh Control" / "ProFresh".
In order to activate this function follow the same
procedure (keeping pressed the 2 buttons for 3 sec.). A
short sound signal will be provided for the activation of
the "Fresh Control" / "ProFresh".
This function controls the fridge fan in order to optimize
food preservation in any ambient temperature conditions.
To minimize the Energy consumption is suggested to
disable the "Fresh Control" / "ProFresh" function and
fan.
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
PRODUCT SHEET
GB
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
PRODUCT SHEET
GB
5019 637 01094
Printed in Poland 02/11
DEFROSTING THE REFRIGERATOR
COMPARTMENT
Refrigerator compartment defrosting is completely
automatic.
Droplets of water on the rear wall inside the refrigerator
compartment indicate that the automatic defrost phase is
in progress. The defrost water is automatically run into a
drain hole and collected in a container, where it
evaporates.
DEFROSTING THE FREEZER
COMPARTMENT
The freezer should be defrosted
once or twice a year or when
excessive frost is present (3 mm
thickness). The formation of frost is
normal. The amount and rate at
which frost accumulates depends on
room conditions and how often the
door is open.
To defrost the unit, switch off the freezer compartment
or the whole appliance, depending on the model, and
remove all food products. Leave the freezer door open
to allow the frost to melt.
For appliances in figure only pull out the defrost water
drain and place a container under the drain.
When the operation is completed, put back the defrost
water drain.
Clean the inside of the freezer. Rinse and dry thoroughly.
Switch the freezer compartment, or the whole appliance,
back on and store the food inside.
REPLACING THE LIGHT
(depending on the model)
BULB's LIGHTING
Always disconnect the refrigerator from the power
supply before replacing any light bulb.
If the inside light is not working, it is necessary to:
1. Remove the light cover: put
the fingers into the side
ventilation holes (1), stretch
the cover gently and move it
upwards.
2. Check the bulb. If necessary unscrew the broken bulb
and replace it with the new one (max power of the
light bulb is given on the light cover).
3. Put on the light cover.
Do not leave the bulb
uncovered.
LED's LIGHTING
If the inside LED light is not
working, it must be replace by
service.
OTHER ABNORMAL APPLIANCE OPERATIONS DISPLAYED BY LEDs
In case of abnormal appliance operation, all the temperature selection LEDs will flash and one beep will sound. To
check the code alarm user have to press and hold the temperature setting Te m p . ° C & Reset alarm pushbuttons and
alarm code will be showing on the temperature LEDs (possible alarm codes are explained in the table below).
When this operation is released, the LEDs will flash until the fault is eliminated. If any alarm shown in the table occurs,
the fridge/freezer functions such as temperature adjustment, super freezing are not available until the fault is
eliminated.
When several alarms occur simultaneously, the alarm with the highest priority is displayed (Number 1 being the highest
priority).
Alarm Priority
Codification to be displayed by
temperature LEDs
Action
LED 4 LED 5 LED 6
Evaporator Temperature Sensor Alarm - Freezer compartment 1 Contact the After-Sales Service and provide the alarm code.
Evaporator Temperature Sensor Alarm - Fridge compartment 2 Contact the After-Sales Service and provide the alarm code.
Ambient Temperature Sensor Alarm - Fridge compartment 3 Contact the After-Sales Service and provide the alarm code.
Description: LED OFF LED ON
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Whirlpool KGE PL 941 A++ IO Program Chart

KGE PL 941 A++ IO
Whirlpool
Brand
Whirlpool
Model
KGE PL 941 A++ IO
Category
Fridge-freezers
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents