Airflow CE100D Installation guide

Brand: Airflow

Model: CE100D

Type: Installation guide

Airflow CE100D is a ducted fan kit designed for efficient air circulation in residential or commercial spaces. With its compact size, it can be discreetly installed in ceilings or walls, making it suitable for a wide range of applications. The CE100D features a powerful motor that delivers effective airflow, ensuring proper ventilation and temperature regulation. It comes with adjustable airflow settings, allowing you to customize the air circulation according to your specific needs.

Ducted Fan Kit

CE100D

CE150DTP

Installation Instructions / Warranty Card

CE100D and CE150DTP Ducted Fan Kit Installation Instructions / Warranty

Installation Instructions

Important:

For optimum efﬁ ciency, position the fan unit as close as possible to the outlet.

1. Select positions for inlet and outlet grilles. These should be clear of all

obstructions and no more than three metres apart. Additionally, the outlet should

be positioned away from windows and doors.

2. Using template on opposite page, cut an opening for both inlet and outlet.

3. Drill 3.6mm holes through required corner ﬁ xing points of inlet and outlet grilles.

4. Place three duct clips 120° apart on collars of both inlet and outlet grilles as well

as on each end of the fan body. (See ﬁ gures 1, 2 and 3.)

5. Attach duct securely over outlet collar, push back into the roof space and secure

outlet with appropriate ﬁ xings for mounting surface. If using screws supplied,

ensure white screw cap arrangements are used to cover screw holes.

6. Select a site for the fan unit as close as possible to the outlet on a stable platform

such as a beam or post. (A saddle may be needed).

7. Make the electrical connections to the fan unit and attach the shortest possible

length of duct from the outlet collar to the fan, making sure that air ﬂ ow is in the

correct direction. Air ﬂ ow direction is from the motor towards the fan blades. (You

may choose not to have any ducting at all between the fan and outlet by inserting

the fan directly into the outlet collar and securing it with duct tape).

8. Keeping as straight a line as possible between the inlet and outlet points, fully

extend duct to minimise restriction of air ﬂ ow and cut the duct to ﬁ t to the fan unit.

Attach duct securely to fan unit and attach the other end of the remaining duct to

the collar of the inlet grille, making sure to secure the duct by passing it over the

duct clips.

9. Push inlet grille into the opening and screw ﬁ x it in the upward position with

screws and anka plugs supplied, and ensure the supplied white screw cap

arrangements are used to cover screw heads.

It is illegal for persons other than licensed electricians, or persons authorised

by legislation, to work on the ﬁ xed wiring of any electrical device.

Fig. 1 - Outlet Fig. 2 - Inlet Fig. 3 - Fan Unit

Cable entry

to motor

Air ﬂ ow

direction

CE100D and CE150DTP Ducted Fan Kit Installation Instructions / Warranty

170mm outer

diameter for

inlet and outlet

for CE150DTP

120mm outer

diameter for

inlet and outlet

for CE100D

Centre hole

Template

Use this template to mark the mounting hole for the fan. Use a

nail or similar object to achor the template at the centre hole,

then insert a pencil through the template at the point indicated

adjacent to the correct fan size and scribe the circle.

F1680/03

CLIPCOM 17725 November 2008

Clipsal Australia Pty Ltd reserves the right to change specifications,

modify designs and dis con tin ue items without incurring obligation

and whilst every effort is made to ensure that descriptions,

specifications and other in for ma tion in this catalogue are correct, no

warranty is given in respect thereof and the company shall not be

liable for any error therein.

are the property of Clipsal Australia Pty Ltd unless otherwise noted.

Product of Clipsal Australia Pty Ltd

A member of Schneider Electric

National Customer Care Enquiries:

Tel 1300 2025 25

Fax 1300 2025 56

clipsal.com

Warranty

The beneﬁ ts conferred by this warranty are in addition to all other rights and remedies in

respect of the product which the consumer has under the Trade Practices Act and similar

State and Territory laws.

The original purchaser of this Airﬂ ow Ducted Fan Kit is provided with the following warranty,

subject to the following conditions. Clipsal Australia Pty Ltd warrant this product for a period

of 12 months from the date of purchase for all parts defective in workmanship or materials.

All defective parts will be replaced free of charge. The following exclusions do not preclude

the purchaser from those statutory rights consumers have under the Trade Practices Act or

similar State and Territory laws.

Warranty Conditions

1. This warranty is only valid for appliances installed according to the manufacturer’s

instructions.

2. This appliance must not be modiﬁ ed or changed in any way.

3. All wiring must be carried out by a licensed electrician or similarly qualiﬁ ed person and

must be connected to the voltage requirements as speciﬁ ed on the ratings label.

4. The manufacturer does not accept liability for any direct or consequential damage,

loss or other expense arising from misuse or incorrect installation and operation of

the appliance.

5. Warranty will only be given on appliances where proof of purchase date is provided, e.g.

original invoice or copy.

6. As a record of your purchase, please ﬁ ll out the following details and ﬁ le this information

with your purchase invoice.

Airﬂ ow Model Number:

Serial Number:

Purchased From:

Date of Purchase:

For Service

Please contact the installer if service is required for this product. If the installer is not

known, contact Clipsal National Customer Care on the following numbers:

Tel 1300 2025 25

Fax 1300 2025 56

Airflow CE100D Installation guide

Airflow CE100D Installation guide

Airflow CE100D Installation guide

Related papers

Other documents