Daewoo 14 q 1 Owner's manual

Brand: Daewoo

Model: 14 q 1

Category: LCD TVs

Type: Owner's manual

STAND-BY

VIDEO AUDIO

Instruction Manual

MODEL NO.

14A5/14A5T/20A5/20A5T/21A5/21A5T

14Q1/14Q1T/20Q1/20Q1T/21Q1/21Q1T

14Q2/14Q2T/20Q2/20Q2T/21Q2/21Q2T

14Q3/14Q3T/20Q3/20Q3T/21Q4/21Q4T

14T1/14T1T/20T1/20T1T/21T1/21T1T

14T2/14T2T/20T2/20T2T/21T2/21T2T

21T5/21T5T

ZO01

P/N:48586375E201

IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL

LOCAL CONTROL

REMOTE CONTROL

Front Back

SLEEP RECALL

SKIPMOVEDEL

TIME MODE

NORMAL

123

456

TELETEXT mode

POWER

NUMBER 0-9

NOT USED

PAGE UP

SUBPAGE

INDEX

PAGE DOWN

HOLD

MUTE

REVEAL

SIZE

CANCEL

G (VOLUME UP)

R (VOLUME DOWN)

C (BRIGHT UP)

Y (BRIGHT DOWN)

TV mode

POWER

NUMBER 0-9

PR (CURSOR)UP

VOLUME UP (CURSOR RIGHT)

OK(NORMAL)

PR(CURSOR) DOWN

VOLUME DOWN(CURSOR LEFT)

MUTE

RECALL

SLEEP

SKIP

MOVE

DELETE

TELETEXT

Not Used

TIME

CONTENTS

* Identity of features on Local and Remote Control 1

* Important safeguards 2

* Installation 3

After moving the set 3

Inserting Batteries into the Remote Control Unit 3

Aerial connection 3

Mains connection 4

Switching the set on and off 4

Tuning the TV Channels 5

Edit 5

Manual Channel Setting 6

* Daily use 7

Selecting a Programme Number 7

Volume and Picture control 7

Timer 8

Sleep 8

Recall 8

Child Lock 8

Time 8

* Teletext 9

* Connecting the External Equipment 11

Water / Moisture : Never install the set in the following places:in the bathroom, in a wet base-

ment.

Do not place any containers with liquid (e.g. flower vases) on the set.

Heat : Never place the set near heat sources (e.g. radiator).

Ventilation : Do not cover the ventilation openings in the cabinet.

Never place the set in a confined space such as a bookcase or built-in-cabi-

net, unless proper ventilation is provided.

Object Entry : Do not insert foreign objects, such as needles and coins, into the ventilation

openings.

Lightning Striking: You should disconnect your set from the mains and the aerial system during

thunderstorms.

Cleaning : Unplug the set from the mains before cleaning.

IMPORTANT SAFEGUARDS

INSTALLATION

If the used set is moved or placed in a different direction, the

MAIN POWER button must be switched off for at least 15 min-

utes in order to take out a colour strain on the screen.

AFTER MOVING THE SET

Press down the battery compartment grip and slide the cover,

Insert the batteries supplied(two 1.5v, type AA).

Make sure that the polarity matches with the (+) and (-) marks

inside of the battery compartment.

Used batteries should be disposed of properly.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

For better picture and sound quality, an effective aerial installa-

tion is the most important.

If you are located in a relatively strong area, you will be able to

use the indoor aerial.

When using an outdoor aerial, it is ususlly connected to the set

by means of 75 ohm coaxial cable.

AERIAL CONNECTION

The working life of this set is 7 years since

its production date and this set may be

dangerous for the life, health and the property

of the consumer, and for the environment

on expiry of its working life.

Plug the mains cable into the power socket with 220V/50Hz AC.

MAINS CONNECTION

Switching On

Switch the set on with the MAIN POWER button, ( ). The set will turn on.

If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the

UP/DOWN button or one of the NUMBER button 0..9 on the remote controller.

The STAND-BY INDICATOR will turn off and a picture will appear on the screen.

Switching off

Press POWER button ( ) on the remote controller to return the set to its stand-by mode.

The STAND-BY INDICATOR will illuminate.

If you don't use the set for extended period of time, turn it off with MAIN POWER button .

SWITCHING THE SET ON AND OFF

MAIN MENU

LANGUAGE

PRESET

P01 P

PICTURE

TIMER

LANGUAGE

PRESET

EDIT

ENGLISH

FRANCAIS

DEUTSCH

ITALIANO

ESPANOL

00 - - - - NO

01 - - - - NO

02 - - - - NO

03 - - - - NO

04 - - - - NO

P SKIP P SKIP

05 - - - - NO

06 - - - - YES

07 - - - - NO

08 - - - - NO

09 - - - - NO

AUTO SEARCH UHF >>

PRESET

EDIT

00 - - - - NO

01 - - - - NO

02 - - - - NO

03 - - - - NO

04 - - - - NO

P SKIP

DELETE 01

P SKIP

05 - - - - NO

06 - - - - NO

07 - - - - NO

08 - - - - NO

09 - - - - NO

EDIT

00 ARD NO

01 ZDF NO

02 BR3 NO

03 SAT1 NO

04 PR07 NO

P SKIP

MOUE 02

P SKIP

05 RTL2 NO

06 - - - - NO

07 - - - - NO

08 - - - - NO

09 - - - - NO

EDIT

P01 P

MAIN MENU

Press the MENU button to call up the MAIN MENU.

The MAIN MENU is consist of 5 sub-menus:

PICTURE, TIMER, LANGUAGE, PRESET, EDIT menu.

LANGUAGE SELECTION

Select a LANGUAGE menu at the MAIN MENU by placing the

cursor on the LANGUAGE with UP/DOWN button and pressing

the OK button. You can choose language you require with

UP/DOWN button.

Press the MENU button to return to the MAIN MENU.

AUTOMATIC TUNING SYSTEM

Select the PRESET menu at the MAIN MENU.

Place the cursor to " " with the RIGHT button.

Press and hold down OK button until the tuning screen appears

above the PRESET menu.

The cursor will move from left to right on the VHF-L line, then

VHF-H, then UHF.

Please wait until EDIT menu appears.

TUNING THE TV CHANNELS

The EDIT menu shows you the programme position assignment.

You can change this programme position assignment according

to your personal preferences.

SKIPPING THE CHANNELS

You can selet SKIP "YES" or "NO" with the SKIP button.

A programme marked with SKIP "YES" is skipped when chang-

ing channel using the UP/DOWN button. A skipped programme

number selected by NUMBER button 0..9 will be displayed in

red.

DELETE PROGRAMME POSITION DATA

Position the cursor to programme number to delete with the

UP/DOWN, LEFT/RIGHT buttons.

Press the DEL button. While this is being carried out the

"DELETE" Prog. No." appear and the "deleted" programme is

moved to the programme no. 69 and changed SKIP "YES". The

programme located in the programme no. 69 will move to the

programme no. 68.

CHANGING THE ORDER OF THE CHANNELS

Position the cursor to programme number to move and press the

MOVE button. The "MOVE Prog. No." will appear.

Position the cursor to programme number to exchange and

press the MOVE button. Two programmes will be exchanged.

ENTER A STATION NAME, CHANGING THE PROGRAMME

NUMBER AND COPYING A PROGRAMME

You can go to the PRESET menu directly for entering a station

name and changing the programme number and copying a pro-

gramme to another programme no. by pressing the OK button.

Refer to the MANUAL CHANNEL SETTING.

EDIT

PRESET

P01 P

SEARCH UHF >>

PRESET

P01 P

FINE TUNE UHF >>

PRESET

P01 P

PRESET

P01 BBC1 P

PRESET

P01 BBC1 P02

- - - -

ARD

ZDF

BR3

SAT1

PR07

You can also call up the PRESET menu at the MAIN MENU.

Press the NUMBER button 0..9 or UP/DOWN buttons to select a

programme number you want.

The screen will change according to the selected programme

number.

SEARCHING A CHANNELS

Locate a cursor to with LEFT/RIGHT button and then

press the UP or DOWN button.

The tuning screen will appear and the cursor will move from left

to right.

Pressing and holding down the UP/DOWN button during 2 sec-

onds, the band will change as following:

VL-VH-U (For GB, U only).

After searching a station, the tuning screen will disappear.

To stop searching, press the MENU button.

FINE TUNING

If you are unable to get a good picture or sound because of a

poor broadcasting signal, it is possible to adjust the fine tuning.

Move the cursor to and press UP or DOWN button to acti-

vate fine tuning up or down.

It obly operates whilst the UP or DOWN button is being pressed.

ENTER A STATION NAME

Select station name in the station name list with UP/DOWN but-

ton and press OK button.

If you want to delete a station name, select "----".

If you can't find the desired name in the list, you can enter your

own.

To do so, move the cursor to the right and press OK button.

Using the UP/DOWN button, select the desired letter, number or

blank.

Press the RIGHT button to select the next position.

Press the OK button to complete this procedure.

TO STORE PROGRAMME IN MEMORY

Move the cursor to the right end with the LEFT/RIGHT button.

Select the programme number that you want to store current dis-

playing programme with station name, fine tuning data and sys-

tem (FRANCE only) in memory using the UP/DOWN button or

NUMBER 0..9.

Press the OK button.

MANUAL CHANNEL SETTING

PICTURE

DAILY USE

The set has a total of 70 programme numbers, 0..69.

The NUMBER button 0..9 are used for direct programme

selection.

In order to select two-digit programm, press the second num-

bered button within two seconds.

Switch through the programme number step by step with the

UP/DOWN button.

SELECTING A PROGRAMME NUMBER

VOLUME CONTROL

Adjust the volume with the VOLUME ( ) DOWN/UP buttons

on the front of the set, or with the LEFT/RIGHT button on the

remote control.

MUTE

Pressing the MUTE button ( ) once turns the sound off.

The sound returns if the button is pressed once more or the pro-

gramme no. is changed.

NORMAL PICTURE SELECTION

When you press the NORMAL button repeatedly you can call up

three picture settings'

for NORMAL I(hard picture), NORMAL II(soft picture),

FAVOURITE (adjustable picture).

PICTURE CONTROL

Press the MENU button to call up the MAIN MENU.

Press the OK button to call up the PICTURE menu.

You can select each function with the UP/DOWN buttons.

Use the LEFT/RIGHT button adjust each function:

BRIGHTNESS( )-COLOUR( )-CONTRAST( )-SHARP-

NESS( )-TINT( ).

* The TINT is active only in NTSC system.

The last set value is automatically stored in FAVOURITE mode.

Note that if you set the brightness and contrast values too low,

the On-screen-display become dark.

VOLUME AND PICTURE CONTROL

TIMER

CLOCK 12:20

WACKE UP TIME --:--

ACTIVATE YES

WACK UP PROG P 45

TIMER

CLOCK 12:20

WACKE UP TIME 7:00

ACTIVATE YES

WACK UP PROG P 45

In the MAIN MENU, Select TIMER menu.

SETTING THE CLOCK

Press the button on the CLOCK line.

Set the hours and minutes with the NUMBER button 0..9 Press

the OK button to complete. The clock will start.

Note that if you turn the TV off with MAIN POWER button, the

clock setting is lost and must be reset if necessary.

SETTING THE WAKE UP TIME

Set WAKE UP TIME in a same way to the above for CLOCK.

Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT button.

When ACTIVATE is "YES", the function is enabled.

Set WAKE UP PROG using the NUMBER button 0..9 or

UP/DOWN button.

When WAKE UP TIME is operate, the set will switch on to this

programme number.

TIMER

By pressing the SLEEP button repeatedly, you can select one

of the following setting:

0->30min. ->60min. ->90min. ->120min. ->0

The set will turn off after time you select.

Automatic Switch-Off in No broadcast Signal

If a broadcasting signal is not present for about 5-30 minutes,

the set will be automatcally turned off.

In AV mode, however, this function dose not operate.

SLEEP

The RECALL button is used to diaplay the current status: pro-

gramme number, station name and clock.

This display appear for 5 seconds unless any button is pressed.

RECALL

You can prevent the use of the TV set without the remote con-

trol.

The set is child-locked after switching off the set by pressing the

Y, C, TELETEXT( ), POWER button ( ) in sequence on the

remote control within 5 seconds.

The child-lock function is indicated by flashing the STAND-BY-

INDICATOR.

The set can only be switched back on using the remote control.

CHILD LOCK

Pressing the TIME button, the current time is displayed on the

screen during 5 seconds.

If the programme you are watching has no Teletext transmission,

no time will be displayed

TIME

TELETEXT

SWITCHING TELETEXT ON/OFF

Press the TELETEXT button ( ). The index page viewed last

will appear.

Press the TELETEXT button to return to the TV mode.

COLOUR BUTTONS IN TOP/FLOF TELETEXT

A red, green, yellow and blue field is shown at the bottom of

the screen.

If TOP or FLOF teletext (FASTEXT) is transmitted by the sta-

tion, pressing the corresponding colour button on the remote

controller, you can select the desired page easily.

SELECTING PAGES

The NUMBER button 0..9 are used to enter a page number.

The selected page number appears at the top of the screen

and the page appears after a short time.

The UP/DOWN buttons increase or decrease the current page

number by 1.

INDEX PAGE

You can switch directly to the programme preview (with TOP

text) or the overview page of the station you are currently view-

ing by pressing the INDEX ( ) button.

PAGE HOLD

Several sub pages can be combined under a page number

and are scrolled at an interval determined by the television sta-

tion.

The presence of sub pages is indicated by, for exemple, 3/6

beneath the time, which means that you are looking at the 3rd

page of a total of 6 pages.

If you want to look at a subpage for a longer period of time,

press the HOLD ( ) button.

The contents of the subpage shown are kept on the screen

and no longer updated or switched to other subpages.

The HOLD symbol ( ) will be displayed on the top left hand

side instead of the page no..

Pressing the HOLD button again, the current subpage appear.

CALLING UP SUBPAGE DIRECTLY

Pressing the SUBPAGE ( ) button, "Page no./--"

appears at the bottom of the screen.

Enter the subpage number that you want to call up with the

NUMBER button 0..9, for example, the 2nd page, sequence

0002. The desired subpage is sought and displayed. To exit,

press SUBPAGE ( ) button again.

WATCHING TELEVISION DURING TELETEXT MODE

Some pages are continually update, for example, stock market

reports, sports announcements, and the latest news.

If you want to watch television and stay informed at the same

time, press CANCEL ( ) button.

The regular programme is still visible and the teletext symbol

( ) appears at the top of the screen.

Pressing the CANCEL button again, the teletext page appears

with the update information.

REVEAL ANSWER

This function can be used on certain pages to reveal the solution

of riddles.

Press the REVEAL button ( ) to reveal a hidden answer and

press again to hide it.

DOUBLING CHARACTER SIZE

Repeatedly pressing the SIZE button ( ) doubles the character

size in the following order: Upper half of the page-> Lower half of

the page-> Return to normal size.

VOLUME AND BRIGHTNESS CONTROL IN TELETEXT MODE

Pressing the MENU button in teletext mode, the volume and

brightness control menu will be displayed in the bottom of the

screen.

You can adjust volume and brightness using the corresponding

colour button on the remote controller.

CONNECTING THE EXTERNAL EQUIPMENT

HEAD PHONE JACK

Insert the headphone plug(3.5mmø) into the headphone sock-

et.

The sound from the speaker will be cut off.

SCART JACK

This is used to connect: a VCR, a PAY-TV decoder, a

Camcoder and a video game console.

In most case, the set changes automatically to AV mode, when

the VCR connected is in play back mode.

If not, press the AV button ( )on the remote control or on

the front of the set.

The AV ( ) will be displayed on the screen with the current

programme number.

In AV mode, you can change the TV programme number with

the UP/DOWN button or the NUMBER button 0..9 You can

also receive the S-VHS signal with SCART jack by selecting S-

VHS mode with AV button ( ).

Note that it's impossible to control the functions excepting the

volume control and mute function in the RGB mode. You must

turn the external equipment off to return to the TV mode.

FRONT AV JACK

Connect the AV(AUDIO/VIDEO) socket with an appreciate

cable to the corresponding socket of the external equipment.

Select AV mode by pressing the AV button ( ). Press the

AV button twice to return to the TV mode.

Note that you can play only apparatus, if two apparatuses are

connected FRONT AV JACK and SCART JACK.

MEMO

Daewoo 14 q 1 Owner's manual

Brand: Daewoo

Model: 14 q 1

Category: LCD TVs

Type: Owner's manual

Download PDF

report

Daewoo 14 q 1 Owner's manual

Daewoo 14 q 1 Owner's manual

Related papers

Other documents