COLOR TELEVISION
INSTRUCTION MANUAL
48586907E202-R2
MODEL
DTC-14D9/20D9/21D9/2131
DTC-14D9T/20D9T/21D9T/2131T
DTC-14D9TP/20D9TP/21D9TP/2131TP
DTC-2132/2132T/2132TP
DTC-14K3ME/14K3MP/14K3MT/14K3MZ
DTC-21K3ME/21K3MP/21K3MT/21K3MZ
MODEL
DTC-25M5/29M5
DTC-25M5T/29M5T
DTC-25M5TP/29M5TP
DTC-25M5MT/29M5MT
DTC-29M6/29M6T
DTC-29U1/29U5
DTC-29U1T/29U5T
DTC-29U1TP/29U5TP
Table of contents
Safeguards 2
INTRODUCTION
Features 3
Installation 3
Identification of controls 4
Remote control 4
Swicthing the set ON/OFF 5
Tuning the TV channels 6
Convenient picture control 8
Enjoying wide and zoom picture 9
Convenient sound control 10
Using other menus 11
Watching picture in picture (option) 15
Connecting the external equipment 17
Connecting with other equipment 18
Connecting DVD PLAYER/BS receiver 19
The Othello game
20
Teletext(option)
22
Specification 23
2
SAFEGUARDS
To operate your receiver at the peak performance, please read this Instruction Manual carefully and retain it for the
future reference.
MWater and Moisture : Never install the set in the following places : in the bathroom, in a wet basement(Dripping or
splashing water).
No objects filled with liquids, such as vases, shall be placed on the apparatus.
MHeat : No naked flame sources, such as candles, should be placed on the apparatus.
MVentilation : The ventilation should not be impeded by covering the ventilation openings with items, such
as newspapers, table-clothes, curtains, etc. Accidental contact with high voltage components
could result in electric shock. Never place the set in a confined space such as a bookcase or built-in
cabinet, unless proper ventilation is provided. The set requires minimum distances around the
apparatus for sufficient ventilation.
MObject Entry : Do not insert foreign objects, such as needles and coins, into the ventilation openings.
MLightning Striking : You should disconnect your set from the main and the aerial system during thunderstorms.
MCleaning : Unplug the set from the main before cleaning. Do not use liquid cleaners of aerosol cleaners. Use only a
lightly dampened soft cloth.
MDo not place liquids including flower vases and vessels filled with chemicals or water, etc. on the top of the unit.
Keep the inside of the unit free from foreign objects such as hairpin. If hazardous objects fall inside of the unit,
unplug it immediately and call a qualified technician for removal.
MWhen you don’t use the set for an extended period during vacation or other occasions, always make sure of
switching off the MAIN POWER(ON/OFF) SWITCH of the TV set.
MDo not place this television equipment on an unstable cart, stand, or table.
The television equipment may fall, causing serious injury to a child or adult, and serious damage to the
equipment. Use only with a cart or stand recommend by the manufacture’s instructions, and should use a
mounting kit approved by the manufacture.
MWhen replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacture that have the same characteristics as the original parts. Unauthorized substitutions may result fire,
electric shock, or other hazards.
MUpon completion of any service or repairs to the set, ask the service (as specified by the manufacture) to
determine that the set is in safe operating condition.
MIf anything goes wrong, don’t try any fix it yourself, get a qualified service agent to look at it.
MWhen Install the TV set, make the gap at least 10cm from the wall(at back, bottom, top and side of the TV set).
NOTE
If the receiver is moved or placed in a different direction, the MAIN POWER (ON/OFF) SWITCH must be switched off for
at least 15 minutes in order to take out a colour strain on the screen.
3
Features
INTRODUCTION
Installation
WIDE / ZOOM Screen : You can select a desired WIDE(or ZOOM) screen mode for movies
as well as the most 4:3 picture mode.
Selectable picture and selectable sound : Allows one-touch selection of your favorite picture
quality and tone quality.
Off-timer and On-timer: Turns off the TV automatically and will turn it back on at a preset time.
Picture-In-Picture (Option)
Digital-Eye (Option)
Teletext(Option)
AFTER MOVING THE SET
If the used set is moved or placed in a different direction, the ON/OFF button must be switched off for
at least 15minutes in order to take out a colour stain on the screen.
INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT
Press down the battery compartment grip and slide the cover. Insert the batteries supplied(two 1.5V,
type AA).
Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.
Used batteries should be disposed of properly.
AERIAL CONNECTION
For better picture and sound quality, an effective aerial installation is the most important.
If you are located in a relatively strong area, you will be able to use the indoor aerial.
When using an outdoor aerial, it is usually connected to the set by means of 75 ohm coaxial cable.
MAINS CONNECTION
Plug the mains cable into the power socket with 100-250V AC, 50/60Hz.
INTRODUCTION
4
Identification of controls
SIDE
PR
PR
NORMAL
MENU
RECALL
MODE
SKIP
1
3
2
4
5
14
15
13
16
10
9
8
7
11
21
22
23 12
6
20
17
18
19
SLEEP
PinP
SWAP
POSITION
SIZE TV/VIDEO
CH.LOCK
DELETE
MOVE
P.SIZE
Remote control
TV mode
ON/OFF
PR (CURSOR) UP
VOLUME UP (CURSOR RIGHT)
RECALL
NUMBER 0~9
NORMAL
SIZE(PIP)
TV/VIDEO(PIP)
SOUND MODE
SOUND SYSTEM
CH.LOCK
DELETE(Edit mode)
MUTE
VOLUME DOWN(CURSOR LEFT)
PR(CURSOR) DOWN
SLEEP
AV
SWAP(PIP)
PinP ON/OFF(PIP)
TV/TEXT
SKIP(Edit mode)
POSITION(PIP)
MOVE(Edit mode)
PICTURE SIZE
TELETEXT MODE
POWER
PAGE UP
SUB PAGE
REVEAL
NUMBER 0~9
INDEX
CANCEL
B
Y
HOLD
PAGE DOWN
SIZE
MIXTEXT
R
G
REAR
FRONT
SCART(OPTION)
29”
Others
29”
OUT
AV1
ANT
DVD IN
DVD-Y
Cb
Cr
VIDEO
VIDEO AUDIO
R
L
(MONO)
LR
A
U
D
I
O
ON/OFF
MAIN
POWER
BUTTON
VIDEO 2
INPUT RL
(MONO) HEAD
PHONE STAND-BY
INDICATOR REMOTE
SENSOR MENU
BUTTON VOLUME
DOWN/UP
BUTTONS
PROGRAMME
DOWN/UP
BUTTONS
TV/VIDEO
VIDEO 2
AUDIO
PR
MENU
L(MONO) R
ON/OFF
PR MENU
VIDEO 2
L(MONO)
AUDIO
R
5
SWITCHING THE SET ON AND OFF
Switching On
Switch the set on with the ON/OFF button in front of the receiver TV. The set will be turn on.
If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the PR
UP/DOWN button or one of the NUMBER button 0..9 on the remote controller.
The STAND-BY INDICATOR turns “RED” to “OFF”, then picture will appear on the screen.
Switching Off
Press POWER button on the remote controller to return the set to its stand-by mode.
The STAND-BY INDICATOR will illuminate.
If you don't use the set for extended period of time, turn it off with MAIN POWER button in front of
the receiver.
Auto-power-off
If broadcasting signal is not present for 30 minutes, the TV will automatically turn off after about 30
minutes. However, if the Off-time or Sleep time is operating, it takes precedence.
This Auto-Power-Off function does not operate in the “AV1” or “AV2” or “DVD” mode.
6
AUTO SETUP SYSTEM
1.Press the MENU button to select INSTALL.
2.Press the y/xbuttons and then select INSTALL.
3.Select AUTO SETUP with the PRy/xbuttons.
Press the right button and then select a sound system.
Press the right button to start AUTO SETUP.
4.Please wait until the EDIT menu appears.
TUNING THE TV CHANNELS
AUTO SETUP SYSTEM
EDIT
1.Press the menu button to select INSTALL.
2.Press the y/xbuttons and then INSTALL SYSTEM.
3.Select EDIT with the PR y/xbuttons and press the C/Bbuttons to
start EDIT.
4.DELETE PROGRAM POSITION DATA.
Position the blue-line to the program to delete with the PR y/x
buttons and the DELETE button.
5.CHANGING THE ORDER OF THE CHANNELS
Position the blue-line to a program to move with the PR y/xbuttons and the MOVE button.
Press the PR y/xbuttons to position the blue-line to another program to move.
By pressing the MOVE button again, selected two program will be moved.
6.ENTER A STATION NAME
Locate the cursor to below NAME with the C/Bbuttons.
Using the PR y/xbuttons, select the desired letter, number or blank.
Press the B(right button) to select the next position.
7.SKIPPING THE CHANNELS
You can select SKIP with the SKIP button in EDIT mode or locate in the cursor to below SKIP
with the C/Bbuttons and then press the PR y/xbuttons to skip the desired program.
A program marked with skip “ ” is skipped when changing channel using the program
UP/DOWN(on normal operation).
Press the NUMBER buttons 0~9 or the PR y/xbuttons to select program number you want. The
screen will change according to the selected program number.
8. SELECT SOUND SYSTEM
When the sound is abnormal, press the MODE button on the remote controller. Select the correct
sound system.
7
8
TO SELECT THE PICTURE MODE
1.press the MENU button to select the PICTURE and then to be
displayed on the right appearance.
BY pressing the C/Bbuttons, the following four mode change
cyclically.[DTC-29U*:Three mode(NORMAL, MILD, FAVOURITE)]
2.You can select the BRIGHTNESS, CONTRAST, COLOUR, and SHARPNESS with the PR y/x
buttons.
Select the desired item with the PR y/xbuttons and press with
the C/Bbuttons to adjust the level.
CONVENIENT PICTURE CONTROL
MYou can select the picture quality instantly.
MODE Picture Quality
NORMAL hard picture
MILD soft picture
DIGITAL EYE picture by optical-sensor
FAVOURITE adjustable
Item Pressing
CB
BRIGHTNESS darker lighter
CONTRAST weaker stronger
COLOUR paler deeper
SHARPNESS softer sharper
9
TO SELECT THE WIDE OR ZOOM SCREEN
1. By pressing the P.SIZE button in remote control, the following four modes change cyclically.
2. Or press the MENU button to FEATURES.
3. And then to be displayed on the right appearance.
Select the ZOOM with the PR y/xbuttons.
4. By pressing the C/Bbuttons, the following three mode change cyclically.
ENJOYING WIDE AND ZOOM PICTURE
MYou can enjoy WIDE picture and ZOOM picture with TV.
In addition to regular wide/zoom screen mode.
NORMAL WIDE ZOOM NORMAL
10
TO VOLUME CONTROL
Adjust the volume with the volume Down/Up button on the front of the set, or with the C/Bbuttons
on the remote control.
TO MUTE THE SOUND
The muting function is convenient when you need to pay attention to surround sounds, answer a
phone call, receive a visitor, etc.
1. Press the button.
2. To restore the sound, press the button again or volume Down/Up.
TO SELECT THE SOUND MODE
1. Press the button to select the desired sound quality.
NORMAL, FAVOURITE, MUSIC, SPEECH can be selected cyclically.
TO ADJUST THE TREBLE/BASS
1. Press the MENU button to select the SOUND, then the feature of OSD
on the right will be appear.
2.Select the TREBLE or BASS with the UP/DOWN buttons. The
LEFT/RIGHT buttons to adjust each function.
TO ADJUST THE BALANCE
1. Press the MENU button to select the SOUND then the feature of OSD on the right will be appear.
2.Select the BALANCE with the UP/DOWN buttons. The LEFT/RIGHT buttons to adjust each the
BALANCE.
CONVENIENT SOUND CONTROL
MYou can select and adjust the sound quality as you like.
VOLUME
SPEECH
MONO
- - : - -
11
TO SET CLOCK
1. Press the MENU button to select the FEATURES and then to be
displayed on the right appearance.
2. Select the CLOCK with PR y/xbuttons.
3. Press the C/Bbuttons to activate the hour or the minute and preset
the hour or minute with the direct(0~9) buttons.
If the clock setting is not done, you can set the clock by selecting the channel which has Text
Signal. The present time of Text channel will be automatically set up. If the clock setting is done
already, the clock doesn’t changed by doing like up.
USING OTHER MENUS
12
TO TURN ON THE TV AUTOMATICALLY(WAKE TIME)
With the CLOCK, the WAKE TIME, the WAKE PR.
Preset, the TV will automatically turn on to a preset program number at a
reset time.
Select the WAKE TIME with PR y/xbuttons.
Press the C/B buttons to activate the hour or the minute and preset the
hour or the minute with the PR y/x
buttons or the direct(0~9) buttons.
TO TURN OFF THE TV AUTOMATIC(OFF TIME)
With the CLOCK and the OFF TIME preset, the TV will automatically
switch to stand-by mode at a preset time.
Select the OFF time using PR y/x
buttons and then press direct key (0~9) to set the OFF TIME.
13
SLEEP TIME SETTING
1. By pressing the SLEEP button repeatedly, you can set the sleep
time
2. If you press the SLEEP button for the first time, SLEEP 0 sign of the non set sleep-timer appears
on the upper left side of the screen.
3. When this button pressed again, 20 minute are set to the sleep-timer.
4. This display disappears within 4 seconds useless any button is pressed.
Whenever pressed again, the setting time is increased by 20 minute.
(SLEEP 0 SLEEP 20 SLEEP 40 SLEEP 60
SLEEP 80 SLEEP 100 SLEEP 120)
5. If this button is pressed again, during the sleep-timer operation, the remaining time of the sleep-
timer appears on the screen.
6. In addition, if this button is pressed repeatedly, the setting time is increased by 20 minute
continuously.
7. When the remaining time become “0”, the TV receiver is turn off automatically.
PR02
SLEEP 20
14
TO SELECT THE ON-SCREEN DISPLAY LANGUAGE
Use this function to choose the language of the on-screen display(OSD)
among English, Vietnamese, Indonesian, Russian, Arabic, Persian,
French and Rumanian.
1. Press the MENU button to select the FEATURES and then to be
displayed on the right appearance.
Press the PR y/xbuttons to select LANGUAGE.
Press the C/Bbuttons to select the desired LANGUAGE.
TO SELECT THE SCREEN COLOR
When no signal is being received, the TV will automatically turn blue if
the SCREEN is BLUE.
1. Press the MENU button to select the and then to be displayed on the
right appearance.
Press PR y/xbuttons to select the SCREEN.
2. Press the C/Bbuttons to change the color of SCREEN.
(BLUE RED OFF)
TO SELECT CHILD LOCK
1. You can prevent the use of the TV set without the remote control.
Press the MENU button to select the FEATURES and press the PR
y/xbuttons to select the CHILD LOCK.
2. Press the C/Bbuttons to change CHILD LOCK ON. Then the program
will be locked.
3. The TV can be turn on only using the remote controller.
TO SELECT QURAN MODE
You can select the QURAN mode when you have selected the ARABIC.
Press the DELETE button to select the QURAN mode, and the QURAN will be displayed.
If you want to exit the QURAN mode, press the DELETE button again.
15
WATCHING PICTURE IN PICTURE(OPTION)
The unit is capable of displaying two picture with the small sub picture simultaneously.
This is called the Picture-In-Picture function. A TV picture or a picture from external source equipment such as a VTR can
be displayed as another picture.
TO WATCH A TV OR AN EXTERNAL SOURCE AS A SUB-PICTURE
1.Select the desired program.
2.Press the PinP button to display a sub-picture.
3.Press the sub TV/VIDEO button repeatedly to select the input for the sub picture(the
small picture). The picture from the AV1, AV2, will appear cyclically(The picture from
the DVD does not appear).
4.To turn off the sub-picture, press the PinP button again.
5.Or press the MENU button to select the PIP and then to be displayed on the
right appearance.
Select the PIP with the PR y/xbuttons. Press the C/Bbuttons to select the PIP
ON(or OFF).
6.Select SELECT with the PR y/xbuttons.
Press the C/Bbuttons to select the input the sub-picture(the small picture). The
picture from the AV1, AV2 will appear cyclically.
7.Select MODE with the PR y/xbuttons. Press the C/Bbuttons to
select the mode(LARGE, SMALL).
The mode will be appear cyclically.
SUB-PICTURE
16
TO SWITCH THE MAIN AND SUB-PICTURE OF THE PIP
Press the SWAP button when a picture-in-picture is displayed.
The main picture(the large picture) and sub-picture(the small picture) are switched.
Press the SWAP button again to switch again.
TO CHANGE THE POSITION OF THE SUB PICTURE
Press the POSITION button repeatedly when a sub-picture is displayed.
The display position of the sub-picture will changed in order to
PIP mode.
4
1
HEADPHONE JACK(29”:SIDE, OTHERS:FRONT)
Insert the headphone plug (3.5mm ) into the headphone socket. The sound
from the speaker will be cut off.
AV2 INPUT TERMINAL(29”:SIDE, OTHERS:FRONT)
1. Prepare the connective plug for picture/sound.
2. Connect the VIDEO picture output terminal with the TV picture input
terminal.
3. Connect the VIDEO sound output terminal with the TV sound input
terminal. In case of mono VIDEO, connect the VIDEO sound output
terminal with left sound input of TV.
4. Press the AV button( ) on the remote control or on the front of the set and
select AV2.
CONNECTING AT AV1
1. Prepare the connective plug for picture/sound.
2.Connect the VIDEO input/output terminal with the
VIDEO(AV1) terminal.
In case of mono VIDEO, connect the VIDEO sound output
terminal with RIGHT (not same as AV2 mode) sound input
of TV.
3. Press the AV button( ) and select AV1.
Press the TV/AV( ) button to change mode.
(RF AV1 AV2 DVD1 DVD2 GAME)
OPTION(SCART)
1. In case of SCART, you can enjoy the picture/sound like a AV1 or TV OUT.(TV OUT function is
described next page)
2. Do not connect the SCART and the TV picture output terminal simultaneously, because the
SCART and the TV picture output terminal is common.
17
CONNECTING THE EXTERNAL EQUIPMENT
OUT
AV1
ANT
DVD IN
DVD-Y
Cb
Cr
VIDEO
VIDEO AUDIO
R
L
(MONO)
LR
R(MONO)
A
U
D
I
O
When connecting other equipment, please ensure you turn the main switch OFF to prevent any
damage to the equipment.
SCART(OPTION)
VIDEO 2
AUDIO
L(MONO) R
front AV2
input terminal
headphone jack
VIDEO 2
L(MONO)
AUDIO
R
29”
Others
18
CONNECTING WITH OTHER EQUIPMENT
1. You can use other equipment with TV signal.
2. Connect external input terminal of other equipment to output of TV signal.
When connecting other equipment, please ensure you turn the main switch OFF to prevent any
damage to the equipment.
LEFT
RIGHT
VIDEO
DVD-Y
Cb
Cr
VIDEO
R
L
(MONO)
A
U
D
I
O
OUT DVD IN
19
CONNECTING DVD PLAYER/BS RECEIVER
1. Prepare the connective plug for picture/sound.
2. Connect the DVD-Y output terminal of DVD player with the
DVD-Y input terminal of TV.
3. Connect the DVD-Cr, Cb output terminal of DVD player
with the DVD-Cr, Cb input terminal of TV.
4. Press the AV( ) button and select DVD mode
DVD MODE
1. DVD1(VIDEO) : When DVD Player Output is not Y-Cb-Cr output, but Video(Composite) signal.
2. DVD2 (Y Cb Cr) : In case of component output
DVD-Y
Cb
Cr
VIDEO
R
L
(MONO)
A
U
D
I
O
TV OUT DVD TERMINAL
OUT
LEFT
Y
Cb
Cr Y
Cb
Cr
RIGHT
SOUND OUTPUT PICTURE OUTPUT
DVD IN
DVD-Y
Cb
Cr
VIDEO
R
L
(MONO)
A
U
D
I
O
OUT
VIDEO
RIGHT
DVD IN
DVD-Y
Cb
Cr
VIDEO
R
L
(MONO)
A
U
D
I
O
LEFT
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Daewoo 20 t 1 st Owner's manual
-
DAEWOO ELECTRONICS DTZ-24 User manual
-
DAEWOO ELECTRONICS DT-42A1 User manual
-
DAEWOO ELECTRONICS DSL-15D1T User manual
-
DAEWOO ELECTRONICS DJ-4710, DJ-4720, DJ-4710E, DJ-4720E User manual
-
Daewoo DT-4280 NH User manual
-
Daewoo DLP-32C1 User manual
-
-
-
