2. Computers & electronics
  3. Computer cables
  4. Cable interface/gender adapters
  5. Addonics Technologies
  6. AEUDMACFWP

Addonics Technologies AEUDMACFWP, IDE-CF AEUDMACF User manual

  • Hello! I am an AI chatbot trained to assist you with the Addonics Technologies AEUDMACFWP User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
using IDE flat cable.
Note:
The IDE-CF Adapter PRO supports hot swap.
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
Phone: 408 453-6212
Email: http://www.addonics.com/support/query/
ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
using IDE flat cable.
Note:
The IDE-CF Adapter PRO supports hot swap.
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
Phone: 408 453-6212
Email: http://www.addonics.com/support/query
4-Pin Molex
Power Connector
CF/MD Slot
Master or Slave
Setting
40-Pin IDE
Connector
Power & drive
activity LED
4-Pin Molex
Power Connector
CF/MD Slot
Master or Slave
Setting
40-Pin IDE
Connector
Power & drive
activity LED
/