Bitspower BP-XSUCAM-BL Installation guide

  • Hello! I've reviewed the Installation Guide for the Bitspower X-Station Universal Cooling After Module BP-XSUCAM_V2. This module provides features like delayed power-off, dual PSU support, and compatibility with various motherboard brands (except EVGA). It includes a countdown display and multiple connection points. I'm ready to answer your questions about using this product.
  • What is the purpose of the delay timer selector (Dip switch)?
    Which motherboard brands are compatible with this module?
    How do I connect the dual power supplies?
Dimensions : 136 X 95 X 25 MM
Installation Dimensions : 160 X 95 X 25 MM
Voltage : 4.5~5.5V
Current : 0.48A
Power ATX Ver : ATX2.2 or More
Please Don’t Open The Mask To Avoid Contact Caused By Short Circuit.
When Two Or More Turn On Simultaneously With The Highest Unit.
JP3
S1
S1
JP4
JP4
JP5
JP5
JP3
Connected To The Expansion Slot Cover Plate Switch Alice
Delaying Timer Selector ( Dip Switch )
Expansion Power LED Switch
Countdown Display
Right Angle 24PIN
Connect TO Motherboard Or Power Supply
60 SEC
Right Angle 24PIN
Connect TO Motherboard Or Power Supply
Option For Future Application
S1
1 2 3 4
K
E
O
N
1 2 3 4
K
E
O
N
60 SEC + 1 MIN
1 2 3 4
K
E
O
N
60 SEC + 2 MIN
1 2 3 4
K
E
O
N
60 SEC + 3 MIN
1 2 3 4
K
E
O
N
60 SEC + 4 MIN
1 2 3 4
K
E
O
N
Attention :
Avoid Using A Single Power Supply In Parallel Two Motherboard.
Please Make Sure The " X-station Universal Cooling After Module " Is Turn Off
Before Log On, Otherwise Is Unable Starting.
The Product Is No Time Limit When Your Motherboard Power Off.
Please Don't Drop The Precision Electronic Product To Prevent Damage Or Malfunction.
JP3
Connect To Right Angle 24PIN
Connect To Motherboard
Accessories
PCI Bracket
( Connect To JP3 )
PCI Bracket
Connect To JP3
90CM
1SET
Dual 20+4PIN PSU Extension Cable 60CM
( Motherboard Connect To Right Angle 24PIN )
Dual 20+4PIN PSU Extension Cable 60CM
1PCS
Black Double Side Tape
( 25 X 70 MM )
Black Double Side Tape
2PCS
60CM
25 X 70 MM
25 X 70 MM
The motherboard will be shut down in 30 seconds and not switch on the delay function of
show down.
Attention :
"X-Station Universal Cooling After Module " Compatible With ASUS Gigabyte Sapphire MSI
Motherboard Except EVGA.
If You Use The Dual Power Supply In The Case An Exception Occurs, Please Turn Off All Power And Check
The "X-Station Universal Cooling After Module" Switch Is Turned Off, Then Follow The Normal Steps To
Re-boot.
Dual Power Supply For Use With X-Station Mini Multi-PSU Active Module Set
( Can Only Be Used With The PW-3A B0 )
JP1 Connect To X-Station Universal Cooling After Module
JP2 Connect To Main Power Supply
JP3 Connect To Secondary Power Supply
Step 1 Turn On The Secondary Power Supply First.
Normal Procedure
Step 2 Turn On The Main Power Supply.
Step 3 Turn On The Motherboard.
/