ASRock Rack D2143D4I2-2T User manual

Category
Servers
Type
User manual

This manual is also suitable for

D2143D4I2-2T
D2163D4I2-2T
User Manual
Version 1.0
Published May 2019
Copyright©2019 ASRock Rack INC. All rights reserved.
Version 1.0
Published July 2020
Copyright©2020 ASRock Rack Inc. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Rack Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished
for informational use only and subject to change without notice, and should not
be constructed as a commitment by ASRock Rack. ASRock Rack assumes no
responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock Rack does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable
for any indirect, special, incidental, or consequential damages (including damages
for loss of prots, loss of business, loss of data, interruption of business and the
like), even if ASRock Rack has been advised of the possibility of such damages
arising from any defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate
ASRock Racks Website: www.ASRockRack.com
Contact Information
If you need to contact ASRock Rack or want to know more about ASRock Rack,
you’re welcome to visit ASRock Rack’s website at www.ASRockRack.com; or you
may contact your dealer for further information.
ASRock Rack Incorporation
6F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
Taipei City 112, Taiwan (R.O.C.)
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Unique Features 5
1.4 Motherboard Layout 6
1.5 Onboard LED Indicators 8
1.6 I/O Panel 9
1.7 Block Diagram 11
Chapter 2 Installation 12
2.1 Screw Holes 12
2.2 Pre-installation Precautions 12
2.3 Installation of Memory Modules (DIMM) 13
2.4 Expansion Slots (PCI Express Slots) 15
2.5 Jumper Setup 16
2.6 Onboard Headers and Connectors 17
2.7 AC-IN / DC-IN Power Connections 22
2.8 Unit Identication purpose LED/Switch 23
2.9 Driver Installation Guide 23
2.10 Dual LAN and Teaming Operation Guide 24
2.11 M.2_SSD (NGFF) Module Installation Guide (M2_1) 25
2.12 M.2_SSD (NGFF) Module Installation Guide (M2_2) 27
Chapter 3 UEFI Setup Utility 28
3.1 Introduction 28
3.1.1 UEFI Menu Bar 28
3.1.2 Navigation Keys 29
3.2 Main Screen 30
3.3 Advanced Screen 31
3.3.1 CPU Conguration 32
3.3.2 DRAM Conguration 35
3.3.3 Chipset Conguration 36
3.3.4 Storage Conguration 39
3.3.5 ACPI Conguration 41
3.3.6 USB Conguration 42
3.3.7 Super IO Conguration 43
3.3.8 Serial Port Console Redirection 44
3.3.9 H/W Monitor 48
3.3.10 Runtime Error Logging 50
3.3.11 Instant Flash 52
3.4 Security 53
3.4.1 Key Management 54
3.5 Boot Screen 58
3.5.1 CSM(Compatibility Support Module) 60
3.6 Event Logs 62
3.7 Server Mgmt 63
3.7.1 System Event Log 64
3.7.2 BMC Network Conguration 65
3.8 Exit Screen 67
Chapter 4 Software Support 68
4.1 Install Operating System 68
4.2 Support CD Information 68
4.2.1 Running The Support CD 68
4.2.2 Drivers Menu 68
4.2.3 Utilities Menu 68
4.2.4 Contact Information 68
Chapter 5 Troubleshooting 69
5.1 Troubleshooting Procedures 69
5.2 Technical Support Procedures 71
5.3 Returning Merchandise for Service 71
D2143D4I2-2T / D2163D4I2-2T
PB 1
English
Chapter 1 Introduction
ank you for purchasing ASRock Rack D2143D4I2-2T / D2163D4I2-2T
motherboard, a reliable motherboard produced under ASRock Racks consistently
stringent quality control. It delivers excellent performance with robust design
conforming to ASRock Rack’s commitment to quality and endurance.
In this manual, chapter 1 and 2 contains introduction of the motherboard and step-
by-step guide to the hardware installation. Chapter 3 and 4 contains the conguration
guide to BIOS setup and information of the Support CD.
1.1 Package Contents
• ASRock Rack D2143D4I2-2T / D2163D4I2-2T Motherboard
(Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.02 cm x 17.02 cm)
• Quick Installation Guide
• 1 x Oculink to 4 SATA Cable (60cm)
• 1 x SATA Power Cable (80cm)
• 1 x ATX 4P to 24P Power Cable
• 1 x I/O Shield
• 2 x Screws for M.2 Sockets
If any items are missing or appear damaged, contact your authorized dealer.
Because the motherboard specications and the BIOS soware might be updated, the con-
tent of this manual will be subject to change without notice. In case any modications of
this manual occur, the updated version will be available on ASRock Rack website without
further notice. You may nd the latest memory and CPU support lists on ASRock Rack
website as well. ASRock Rack’s Website: www.ASRockRack.com
If you require technical support related to this motherboard, please visit our website for
specic information about the model you are using.
http://www.asrockrack.com/support/
2 3
English
1.2 Specications
D2143D4I2-2T / D2163D4I2-2T
MB Physical Status
Form Factor Mini-ITX
Dimension 6.7'' x 6.7'' (17.02 cm x 17.02 cm)
Processor System
CPU D2163D4I2-2T
Supports Intel® Xeon® D-2163 Processors
D2143D4I2-2T:
Supports Intel® Xeon® D-2143 Processors
Chipset Soc
System Memory
Capacity - 4 x 288-pin DDR4 DIMM slots
- Support up to 256GB DDR4 ECC RDIMM/LR DIMM
Type - Quad Channel DDR4 memory technology
- Support DDR4 ECC RDIMM/LR DIMM
Voltage 1.2V
DIMM Size per
DIMM
- R/LR DIMM: 32GB, 16GB, 8GB, 4GB
DIMM
Frequency
- ECC RDIMM: 2133/2400/2666 MHz
- LR DIMM: 2133/2400/2666 MHz
*the max speed may vary based on SoC SKU
Expansion Slot
PCIe 3.0 x 16
SLOT7: Gen3 x16 link
Storage
SATA Controller Intel® Xeon® D-2143 or D-2163: 8 x SATAIII 6.0 Gb/s from 2 x
OCulink, 2 x SATAIII 6.0 Gb/s from M.2 M-key
Ethernet
Interface 10000/1000 Mbps
LAN Controller - 2 x RJ45 10GLAN by Intel® X557-AT2
- Supports Wake-On-LAN
- Supports Energy Ecient Ethernet 802.3az
- Supports Dual LAN with Teaming function
- Supports PXE
- LAN1 Supports NCSI
Management
BMC Controller ASPEED AST2500 : IPMI (Intelligent Platform Management
Interface) 2.0 with ikvm and vMedia support
IPMI Dedicated
GLAN 1 x Realtek RTL8211E for dedicated management LAN
Features - Watch Dog
- NMI
D2143D4I2-2T / D2163D4I2-2T
2 3
English
Graphics
Controller ASPEED AST2500
Rear Panel I/O
VGA Port D-sub x 1
Lan Port
- 2x 10GLAN RJ45(by Intel® X557-AT2 )
- 1 x RJ45 Dedicated IPMI LAN port
- LAN Ports with LED (ACT/LINK LED and SPEED LED)
UID Button 1
USB 3.0 2
Internal Connector
COM Header 1
M.2
- 1x M-Key (PCIe3.0 x4 or SATAIII 6.0 Gb/s); Supports 2242
form factor
- 1x M-Key (PCIe3.0 x4 or SATAIII 6.0 Gb/s); Supports
22110/2280 form factor
Auxiliary Panel
Header 1 (include chassis intrusion, 2 front LAN LED, System LED)
TPM Header 1 x (13-pin)
IPMB Header 1
Fan Header 1 x CPU Fan, 2 x System Fans (1 front, 1 rear) (build in CPU
active fansink)
ATX Power 1 x (4-pin) + 1 x (8-pin) support 12V DC-IN (DC-IN mode
power budget is up to 432W)
SATA Power 1 (for DC-IN mode)
*Caution: Misconnection may permanently damage the motherboard.
OCulink 4 x OCulinks support PCIe3.0 x4; 2 of OCulinks support 4
SATAIII 6Gb/s each
System BIOS
BIOS Ty pe 256Mb AMI UEFI Legal BIOS
BIOS Features
- Plug and Play (PnP)
- ACPI 1.1 Compliance Wake Up Events
- SMBIOS 2.3.1 Support
- ASRock Instant Flash
Hardware Monitor
Temperature - CPU/PCH/DDR/LAN/Storage Temperature Sensing
- MB/Card side/TR1 Temperature Sensing
Fan
- CPU/Rear/Front Fan Tachometer
- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by
CPU Temperature)
- CPU/Rear/Front Fan Multi-Speed Control
Voltage Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,
+1.1V,+1.0V, +BAT, 3VSB, 5VSB
4 5
English
Support OS
OS Microso® Windows®:
- Server 2012 R2 (64 bit)
- Server 2016 (64 bit)
Linux:
- RedHat Enterprise Linux Server 6.8 (64 bit) / 7.4 (64 bit)
- CentOs 6.8 (64 bit) / 7.4 (64 bit)
- SUSE Enterprise Linux Server 11 SP4 (64 bit) / 12 SP3 (64 bit)
- UBuntu 16.04 (64 bit) / 18.04 (64 bit)
- Fedora 26 (64 bit)
- FreeBSD 11.2 (64 bit)
Virtual:
- VMWare ESXi 6.5 u1
- Citrix XenServer 7.2
- Win hyper-V Server 2016
* Please refer to our website for the latest OS support list.
*On Ubuntu 16.04 (64 bit) / 18.04 (64 bit) system, Intel Raid mode only sup-
ports UEFI BOOT.
Environment
Temperature Operation temperature: 10°C ~ 35°C / Non operation
temperature: -40°C ~ 70°C
*Install a CPU Fan when the airow through the heatsink is below 2CFM.
* For detailed product information, please visit our website: http://www.asrockrack.com
is motherboard supports Wake from on Board LAN. To use this function, please make
sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility, this motherboard may fail Windows® Hardware Quality
Lab (WHQL) certication tests. If you install the drivers only, it will pass the WHQL tests.
D2143D4I2-2T / D2163D4I2-2T
4 5
English
1.3 Unique Features
ASRock Instant Flash is a BIOS ash utility embedded in Flash ROM. is conve-
nient BIOS update tool allows you to update system BIOS without entering operating
systems rst like MS-DOS or Windows®. With this utility, you can press the <F6> key
during the POST or the <F2> key to enter into the BIOS setup menu to access ASRock
Rack Instant Flash. Just launch this tool and save the new BIOS le to your USB ash
drive, oppy disk or hard drive, then you can update your BIOS only in a few clicks
without preparing an additional oppy diskette or other complicated ash utility.
Please be noted that the USB ash drive or hard drive must use FAT32/16/12 le
system.
6 7
English
1.4 Motherboard Layout
DDR4_B1 (64 bit, 288-pin module, Blue)DDR4,
DDR4_A1 (64 bit, 288-pin module,)DDR4, Blue
17.0cm (6.7 in)
17.0cm (6.7 in)
3
FAN2
IPMB_1
1
HDLED RESET
PLED PWRBTN
PANEL1
1
DDR4_C1 (64 bit, 288-pin module, Blue)DDR4,
DDR4_D1 DDR4, Blue(64 bit, 288-pin module,)
1
PSU_SMB1
FAN1
BAT1
NUT9
M2_1
PCIE7
1
ME_RECOVERY1
VGA1
USB 3.0
T: USB2
B: USB1
IPMI
LAN
UID1
LAN1 LAN2
CLRMOS1
FAN3
ITX_AUX_PANEL1
1
COM1
1
1
TPM1
BMC
AST2500
CPU1
10GBASE-T
PHYX557
U6755
BIOS
ROM
RoHS
26
7
8
9
10
4
ATX12V3
M2_2
NUT8
ATX12V2
5
1
SATA_SGPIO1
1
11
12
13
14
15
16
17
18
19
20
21
22
23
NUT1
OCU1 OCU2
OCU3 OCU4
(NCSI)
(SATAPower)
D2143D4I2-2T / D2163D4I2-2T
6 7
English
No. Description
1 Rear Fan Connector (FAN2)
2PSU SMBus (PSU_SMB1)
3 Intelligent Platform Management Bus header (IPMB_1)
4 SATA Power Connector (DC-IN Mode) (ATX12V3)**
5 ATX 12V Power Connector (ATX12V2)
6 ATX 12V Power Connector (U6755)**
7 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
8 CPU Fan Connector (FAN1)
9 Front Fan Connector (FAN3)
10 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1)
11 SATA SGPIO Connector (SATA_SGPIO1)
12 TPM Header (TPM1)
13 Auxiliary Panel Header (ITX_AUX_PANEL1)
14 System Panel Header (PANEL1)
15 ME Recovery Jumper (ME_RECOVERY1)
16 OCuLink x4 Connector (OCU2)
17 OCuLink x4 Connector (OCU4)
18 OCuLink x4 Connector (OCU1)
19 Clear CMOS Pad (CLRMOS1)
20 OCuLink x4 Connector (OCU3)
21 COM Port Header (COM1)
22 M.2 Socket (M2_2) (Type 2242)
23 M.2 Socket (M2_1) (Type 2280/22110)
*For DIMM installation and conguration instructions, please see p.13 (Installation of Memory Modules
(DIMM)) for more details.
**Caution: Misconnection between the ATX12V3 and the U6755 connectors may permanently damage the
motherboard.
8 9
English
1.5 Onboard LED Indicators
DDR4_B1 (64 bit, 288-pin module, Blue)DDR4,
DDR4_A1 (64 bit, 288-pin module,)DDR4, Blue
1
HDLED RESET
PLED PWRBTN
DDR4_C1 (64 bit, 288-pin module, Blue)DDR4,
DDR4_D1 DDR4, Blue(64 bit, 288-pin module,)
1
PCIE7
1
UID1
1
1
BMC
AST2500
RoHS
1
12
3
4
5
FAN2
FAN1
FAN3
No. Item Status Description
1LED_FAN2 Amber FAN2 failed
2 SB_PWR1 Green STB PWR ready
3LED_FAN1 Amber FAN1 failed
4LED_FAN3 Amber FAN3 failed
5BMC_LED1 Green BMC heartbeat LED
D2143D4I2-2T / D2163D4I2-2T
8 9
English
1.6 I/O Panel
14
2
5
6
3
No. Description No. Description
1VGA Port (VGA1) 4 10G LAN RJ-45 Port (LAN1)**
2 USB 3.0 Ports (USB3_12) 5 10G LAN RJ-45 Port (LAN2)**
3 Dedicated IPMI LAN Port* 6 UID Switch/LED (UID1)
LAN Port LED Indications
*ere are two LED next to the LAN port. Please refer to the table below for the LAN port
LED indications.
Dedicated IPMI LAN Port LED Indications
Activity / Link LED Speed LED
Status Description Status Description
O No Link O No Link
Blinking Yellow Data Activity O 10M bps connection
On Link Yel low 100M bps connection
Green 1G bps connection
ACT/LINK LED
SPEED LED
LAN Port
10 11
English
**ere are two LEDs on each LAN port. Please refer to the table below for the LAN port
LED indications.
10G LAN Port (LAN3, LAN4) LED Indications
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 100Mbps connection or
no link
Blinking Yellow Data Activity Yellow 1Gbps connection
On Link Green 10Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
SPEED LED
ACT/LINK LED
D2143D4I2-2T / D2163D4I2-2T
10 11
English
1.7 Block Diagram
12 13
English
Chapter 2 Installation
This is a Mini-ITX form factor (6.7'' x 6.7'', 17.0 cm x 17.0 cm) motherboard. Before
you install the motherboard, study the conguration of your chassis to ensure that the
motherboard ts into it.
2.1 Screw Holes
Place screws into the holes indicated by circles to secure the motherboard to the chassis.
2.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components or
change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the motherboards components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use a
grounded wrist strap or touch a safety grounded object before you handle the compo-
nents.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in
the bag that comes with the component.
5. When placing screws into the screw holes to secure the motherboard to the chassis,
please do not over-tighten the screws! Doing so may damage the motherboard.
Make sure to unplug the power cord before installing or removing the motherboard. Failure
to do so may cause physical injuries to you and damages to motherboard components.
Do not over-tighten the screws! Doing so may damage the motherboard.
Before you install or remove any component, ensure that the power is switched o or the
power cord is detached from the power supply. Failure to do so may cause severe damage to
the motherboard, peripherals, and/or components.
D2143D4I2-2T / D2163D4I2-2T
12 13
English
2.3 Installation of Memory Modules (DIMM)
is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and
supports Dual / Quad Channel Memory Technology.
Dual / Quad Channel Memory Conguration
Priority DDR4_A1
(Blue)
DDR4_B1
(Blue)
DDR4_C1
(Blue)
DDR4_D1
(Blue)
1Populated Populated
2Populated Populated Populated Populated
*Since installing three memory modules is NOT supported on this motherboard, we suggest not using
this conguration.
1. For dual channel conguration, you always need to install identical (the same brand,
speed, size and chip-type) DDR4 DIMM pairs.
2. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;
otherwise, this motherboard and DIMM may be damaged.
3. Please install the memory module on CH0_A1 for the rst priority.
4. To activate Dual Channel Memory Technology, please follow the “Dual Channel Memory
Conguration” table below.
e DIMM only ts in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
14 15
English
1
2
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77

ASRock Rack D2143D4I2-2T User manual

Category
Servers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI