Tile Effect Backboards

Cutting & Positioning Guide

This leaflet gives information on how to cut and position the backboard correctly and ensure correct alignment when fitting

one backboard on top of another. Please note: The panel is not reversible.

When fitting two sections together, cut along the very bottom of the grout line of the section you wish to keep,

so it can join seamlessly to the panel below.

Section of panel to use.

This will form the top part of the

adjoining backboards.

grout line

datumed to the bottom left corner.

No grout

Scan the QR code

using your smart

device to access

the installation

Set panel with this corner

bottom left