Oppo DV-970HD User manual

DVD PLAYER

DV-970HD

USER MANUAL

READ CAREFULLY

BEFORE OPERATION

i

Table of Contents

Table of Contents......................................................................1

Important Information...............................................................1

Important Safety Instructions ....................................................................................1

Cautions.......................................................................................................................2

FCC Statement ............................................................................................................2

Copyright Protection...................................................................................................3

Compatible Disc Types ...............................................................................................3

INSTALLATION ..........................................................................4

Front Panel Controls ...................................................................................................4

Front Panel Display Window .......................................................................................4

Rear Panel Connectors ...............................................................................................4

Remote Control ...........................................................................................................5

Battery Installation ...........................................................................................................................6

Using the Remote Control ...............................................................................................................6

Connection to a TV......................................................................................................7

HDMI Connection.............................................................................................................................7

Other Connection Options ...............................................................................................................8

Connection to an Audio System .................................................................................9

Connection to a Stereo or Surround Audio System.........................................................................9

Connection to a Receiver/Amplifier with Dolby Digital or DTS Decoder........................................10

Connection to a Receiver/Amplifier with 5.1ch Audio Input ...........................................................11

BASIC OPERATIONS................................................................12

Disc Playback............................................................................................................12

Pause Playback.........................................................................................................12

DVD Menu Playback ..................................................................................................13

Volume Control..........................................................................................................13

Mute...........................................................................................................................13

OSD (On-Screen Display)...........................................................................................14

Audio Language/Channel Selection..........................................................................14

Subtitle Selection......................................................................................................14

Angle Selection .........................................................................................................15

Zooming the Displayed Frame..................................................................................15

ADVANCED OPERATIONS........................................................16

TV System Selection.................................................................................................16

HDMI Output Resolution ...........................................................................................16

Fast Playback............................................................................................................17

Slow Playback...........................................................................................................17

ii

Repeat Playback....................................................................................................... 17

Repeat the Selected Section ................................................................................... 18

Random and Shuffle Playback.................................................................................. 18

Playback by Track Number ...................................................................................... 18

Playback from a Specific Location .......................................................................... 19

Playing DVD discs..........................................................................................................................19

Playing CD discs............................................................................................................................19

Memory...................................................................................................................... 20

Viewing Static Pictures on DVD-Audio Discs .......................................................... 20

Audio-Only Mode ....................................................................................................... 20

Virtual Keyboard....................................................................................................... 21

Disc INFO .................................................................................................................. 21

Playing DivX, Digital Audio and Picture Files.......................................................... 22

Digital Picture Play Operations ......................................................................................................23

Digital Music Play Operations ........................................................................................................24

Playing a Disc with Both Digital Audio and Picture Files ...............................................................24

Use of USB Equipment and 4-in-1 Card Reader....................................................... 24

Playing USB Device.......................................................................................................................24

Playing Flash Memory Card...........................................................................................................25

SETUP MENU OPTIONS........................................................... 26

General Setup Page .................................................................................................. 27

Speaker Setup Page ................................................................................................. 28

Audio Setup Page...................................................................................................... 30

Video Setup Page...................................................................................................... 32

Preference Page........................................................................................................ 32

REFERENCES........................................................................... 34

Useful Notes.............................................................................................................. 34

Troubleshooting........................................................................................................ 34

Specifications ........................................................................................................... 35

Language Code List .................................................................................................. 36

LIMITED WARRANTY............................................................... 37

OPPO Digital, Inc. Limited One Year Warranty........................................................ 37

1

Important Information

CAUTION:

TO PREVENT ELECTRICAL SHOCK, DO NOT

REMOVE THE COVER. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING:

TO PREVENT DAMAGE WHICH MAY RESULT IN

FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE, DRIPPING OR

SPLASHING AND THAT NO OBJECTS FILLED WITH

LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON

THE APPARATUS.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to alert

the user to the presence of uninsulated

“dangerous voltage” within the product's

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operation and

maintenance (servicing) instruction in the

literature accompanying the appliance

CAUTION: THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO

NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION: DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG. A POLARIZED

PLUG HAS TWO BLADES WITH ONE WIDER THAN THE OTHER. THE WIDE BLADE IS

PROVIDED FOR YOUR SAFETY. IF THE PROVIDED PLUG DOES NOT FIT INTO YOUR

OUTLET, CONSULT AN ELECTRICIAN TO HAVE A SUITABLE OUTLET INSTALLED.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY

WITH THE SAME OR EQUIVALENT TYPE.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

IMPORTANT INFORMATION

2

Cautions

• Please disconnect the power plug from the wall outlet if you are not going to use the player for a long

time.

• Ensure that all audio/video cables are properly connected before plugging in the power plug. The

player is not disconnected from the AC power source as long as it is connected to the wall outlet,

even if the player itself has been turned off.

• The acceptable power input range is AC ~ 100V-240V, 50/60Hz

• Before turning on the power of the player, please adjust the volume level of TVs, audio system

speakers and amplifiers to the minimum. Adjust the volume as necessary only after normal playback

has started to avoid damage to your hearing and equipments.

• Do not put the player near any high power loudspeakers so as to avoid any interference due to

vibration or magnetic fields.

• Please put the player at a dry and well ventilated area. Do not put it near heat source, or expose it to

direct sunlight, mechanical vibration, humidity or excessive dust.

• Before moving the player, take out any discs. Otherwise the disc may be damaged.

• When moving the player from a cold place to a warm one, or vice versa, moisture may condense on

the laser pickup unit inside the player. Should this occur, the player may not operate properly. In

such a case please turn the power on for 1-2 hours (without disc) until the moisture evaporates.

• Clean the cabinet, panel, and controls only with a soft cloth slightly moistened with water or a mild

detergent solution. Never use any type of abrasive pad, scouring powder or solvent such as alcohol

or benzene for cleaning.

• Do not place objects filled with liquid, such as vases, on the player.

• The AC power plug is used as the disconnect device, so the AC power plug shall always remain

readily operable.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT INFORMATION

3

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this

device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Copyright Protection

This product incorporates copyright protection technology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Compatible Disc Types

Type Size Recorded Contents

12 cm or 8cm

DVD: Compressed digital audio + compressed digital video

(dynamic picture)

12 cm or 8cm

DVD-Audio: Multi-channel digital audio + compressed digital video

or still pictures

12 cm or 8cm Super Audio CD: Multi-channel digital audio

12 cm or 8cm CD-DA: Digital Audio

NOTES:

This manual uses the following icons to indicate items applicable to the compatible disc types:

Applies to DVD discs

Applies to DVD-Audio discs

Applies to Super Audio CD

discs

Applies to CD discs

4

INSTALLATION

Front Panel Controls

1. POWER Button 2. Disc Tray 3. OPEN/CLOSE Button

4. PLAY/PAUSE Button 5. STOP Button 6. Display Window

7. Flash Memory Card Reader 8. USB Jack

Front Panel Display Window

1. DVD Disc 2. Play 3. Playback Status Indicator

4. Chapter or Track 5. Playback Time 6. Repeat

7. Pause 8. Dolby Digital

Rear Panel Connectors

INSTALLATION

5

1. HDMI Jack 2. Mixed L/R Audio Out Jacks 3. 5.1ch Audio Out Jacks

4. S-Video Jack 5. Video Out Jack 6. Component Video (Y, Pb, Pr) Jacks

7. Coaxial Digital Audio Jack 8. Optical Digital Audio Jack

Remote Control

1. POWER Button – Toggle

power STANDBY and

ON

2. MEMORY Button – Save

the playing point or jump

to the saved point

3. DVD/CARD Button –

Switch playback media

between DVD and flash

memory card

4. AUDIO ONLY Button –

Turn off/on video

5. VOLUME - - Decrease

volume

6. NUMBER Buttons –

Enter numeric values

7. TITLE Button – Show

DVD title menu

8. ARROW Buttons –

Navigate menu selection

9. SELECT Button –

Confirm menu selection

10. SETUP Button – Enter

the DVD player setup

menu

11. SUBTITLE Button –

Change subtitle

language / Switch

picture display mode

12. AUDIO Button –

Change the audio

language or channel

13. PLAY/PAUSE Button –

Start or pause playback

14. STOP Button – Stop

playback

15. REV Button – Fast

reverse play

16. FWD Button – Fast

forward play

17. PREV Button – Skip

Show/hide On-Screen

Display

20. KEYBOARD Button –

Show/hide virtual

keyboard

21. HDMI Button – Switch

HDMI output resolution

22. P/N Button – Switch

output TV system:

NTSC, PAL or AUTO

23. SLOW

Button – Slow

play

24. REPEAT Button –

Repeat play

25. A-B Button – Repeat

play the selected

section

26. GOTO Button – Play

from a specified location

27. ANGLE Button –

Change camera angles

28. ZOOM Button – Zoom

in/out the display

29. RETURN Button –

Return to the previous

menu

30. MENU Button – Show

DVD menu

31. CLEAR Button – Clear

input numbers

32. VOLUME + - Increase

volume

33. MUTE Button – Mute

audio

34. INFO Button – Display

disc info

35. PSM Button – Power

Spectrum Meter on/off

36. EJECT Button –

Open/close the disc tray

INSTALLATION

6

Battery Installation

1. Remove the battery

compartment cover

2. Insert batteries

3. Replace the battery

compartment cover

Using the Remote Control

When using the remote control, the front window of the remote control should be pointed to the infrared sensor

on the front panel within an angle of ±30° and a range of about 26 ft.

CAUTIONS

• Never drop the remote control or expose it to moisture.

• Never expose the infrared remote sensor on the front panel to direct sunlight or strong beams.

• When the batteries become low, replace them in time.

• If the remote control will not be used for a long time, please remove the batteries from it.

NOTES

• When a button is pressed but its function is invalid at the moment, the TV screen displays:

INSTALLATION

7

Connection to a TV

HDMI Connection

• If your TV has an HDMI input, you can use the included HDMI cable to connect the DVD player

to the TV. This is the most preferred connection method since it delivers both video and audio

in pure digital format via a single cable.

• When playback is completely stopped, use the “HDMI” button on the remote control to switch

the video output resolution. Select the resolution that produces the best picture quality on your

TV. (Please refer to page

16 for details.)

• If the HDMI input of your TV is only capable of decoding 2-channel digital audio, it is

recommended that you set audio down-mix mode of the DVD player to “Stereo”. (Please refer

to page

28 for details.)

INSTALLATION

8

Other Connection Options

Video Connection

Depending on the input available on your TV, select one of the following methods to connect the video

output of the DVD player to your TV. The video connections are listed in descending order of video

quality.

BEST If the TV has a DVI input, using an HDMI-DVI Adapter Cable to connect the HDMI

output of the DVD player to the TV will result the best pure digital video quality.

BETTER If the TV has component video inputs, please use a component video cable to connect

the component video output of the DVD player to the TV. The connectors are color

coded, so please make sure the cable connections match on both ends. The

component video connection will produce a very clear picture with high color accuracy.

GOOD If the TV has an S-Video input, you may use an S-Video cable to connect the DVD

player to the TV. S-Video reduces the interference between the luminance

(brightness) and chrominance (color) video signals.

STANDARD If the TV has a standard composite video input, please use the included yellow video

cable to connect the VIDEO output of the DVD player to the TV.

INSTALLATION

9

Audio Connection

• Please use the Red/White audio cables to connect the MIXED audio output of the DVD player

to the TV. Make sure the audio cables are connected to the same input terminal group on the

TV as the video signals.

• Please set the down-mix mode of the DVD player to “Stereo” or “V. Surround”. (Refer to page

28 for details.)

Connection to an Audio System

Connection to a Stereo or Surround Audio System

• If the audio system does not have surround speakers, please set the down-mix mode to

“Stereo” or “V. Surround”.

• If the audio system has surround speakers and Dolby Pro Logic Surround support, please set

the down-mix mode to “Left/Right”.

(Please refer to page

28 for details.)

INSTALLATION

10

Connection to a Receiver/Amplifier with Dolby Digital or DTS Decoder

• Please set the SPDIF Output of the DVD player to “Raw”. (Refer to page

30 for details.)

NOTES

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

INSTALLATION

11

Connection to a Receiver/Amplifier with 5.1ch Audio Input

• Please set the audio down-mix mode of the DVD player to “5.1ch”. (Refer to page

28 for

details.)

• Please set the speaker size and distance in the “Speaker Setup” page of the DVD player’s

setup menu. (Refer to page

28 for details.)

12

BASIC OPERATIONS

Disc Playback

1． Press the POWER button to turn on the DVD player.

2． Press the OPEN/CLOSE (EJECT) button to eject the disc tray.

3． Place the disc with the label side facing up and the record side

facing down.

4． Press the OPEN/CLOSE (EJECT) button again to retract the tray.

5． The DVD player reads disc information and starts playback.

6． Depending on the content of the disc, a menu or navigation screen

may appear. Please use the navigation arrow and SELECT

buttons to select the content to play.

7． To stop playback, press the STOP button.

• During DVD playback, pressing the STOP button for the

first time brings the DVD player to a pre-stop mode. You

can resume playback from the stopped point by pressing

the PLAY/PAUSE button. This pre-stop mode allows you

to change the player settings and then resume playback.

• To completely stop playback, press the STOP button twice.

8． To turn off the player, press the POWER button.

• This unit consumes a small amount of power even when it

is turned off to STANDBY mode. To save power when the

unit is not to be used for a long time, unplug it from the

household AC outlet.

Pause Playback

1. During playback, press the PLAY/PAUSE button to temporarily pause

the program.

• In the PAUSE status, the TV screen displays:

2. Press the PLAY/PAUSE button again to resume playback.

NOTES

If the screen saver is set to “ON” (please refer to page

27 for details), after pausing for 2 minutes the screen

saver will be displayed automatically. This is to minimize possible burn-in on plasma or CRT screens caused

by displaying a static image for a prolonged period of time.

BASIC OPERATIONS

13

DVD Menu Playback

1. Some DVD discs contain title menu or chapter menu functions.

2. Press the MENU button on the remote control to display the menu

on the TV screen.

3. Make menu selections using the number buttons or navigate the

menu using the CURSOR buttons, and then press the

PLAY/PAUSE or SELECT button to make the selection.

NOTES

• Press the TITLE button to return to the disc title menu.

• Press the MENU button to return to the initial menu.

• Press the RETURN button to return to the previous menu. The return location varies with discs.

Volume Control

1. For regular audio volume adjustment, it is recommended that you use the

volume control on your TV or receiver/amplifier.

2. The VOL +/- buttons on the DVD remote control is provided as an

alternative way of controlling the audio volume. It is recommended that

you use this control to make the audio volume from the DVD player the

same as from other sources, such as TV programs or a VCR.

• Press the VOL – button to decrease the volume.

• Press the VOL + button to increase the volume.

• The maximum volume is 20.

Mute

1. Press the MUTE button on the remote control during playback to turn off audio

output. The TV screen displays “MUTE”

2. Press the MUTE button again to resume audio output.

NOTES

Check the MUTE status by pressing the MUTE button when there is no audio output.

BASIC OPERATIONS

14

OSD (On-Screen Display)

Press the OSD button on the remote control to show disc information and operation

function hints on the TV screen.

The OSD display includes the followings:

DVD disc:

CD disc:

Audio Language/Channel Selection

To select the audio language or channel, press the AUDIO button on the remote control

during playback.

• For DVD or DivX discs that are encoded with multiple audio languages or channels, you may select

the desired language or channel.

• For CD or other stereo audio content, you may select audio output from the LEFT channel only,

RIGHT channel only, or STEREO.

NOTES

Availability of languages and audio channels varies with discs.

Subtitle Selection

When playing DVD discs or DivX programs recorded with subtitles, press the

SUBTITLE button on the remote control to select the desired subtitle.

Each press of SUBTITLE button switches one available subtitle in a looping manner:

NOTES

Availability of subtitle depends on discs and contents.

BASIC OPERATIONS

15

Angle Selection

1. When playing DVD discs, an angle mark will be displayed on the screen when

the player detects scenes recorded with multiple angles:

2. Press the ANGLE button on the remote control to select the desired playing angle.

3. To resume normal playback, repeat pressing the ANGLE button until the default angle is

displayed.

NOTES

• This function is available only when the discs are recorded with multiple angles.

• The angle mark on the screen can be turned off using the setup menu of the DVD player.

Zooming the Displayed Frame

The feature zooms in or out the displayed frame.

1. To change the zoom ratio, press the ZOOM button on the remote control. Each press of the

ZOOM button will switch the zoom ratio in the following sequence:

1.0 (No zooming) Æ 1.2 Æ 1.3 Æ 1.5 Æ 2 Æ 2.5 Æ 3 Æ 3.5 Æ 4 Æ ½ Æ ⅓ Æ ¼ Æ Back to 1.0 again

2. When the frame is magnified, press the ARROW buttons to move the visible area in the frame

(Panning).

16

ADVANCED OPERATIONS

TV System Selection

While you will want to set the video output system (NTSC/PAL) to the same as that

supported by your TV, realize that the DVD player will convert, on-the-fly any

content that is not in the format your TV understands. The default output is NTSC

for North America. Some things to keep in mind:

• When the video output is set to PAL or NTSC system, the DVD player

will convert the disc content to the selected system if it is different.

• When the video output is set to AUTO, the DVD player will not perform

system conversion. The AUTO mode is only to be used if your TV

supports both NTSC and PAL systems.

• Playback must be stopped before switching the system from one

setting to another.

Output Resolution

If the DVD player is connected to the TV using its HDMI or component output, you

may use the HDMI button on the remote control to select the best display resolution.

1. Make sure the HDMI cable, HDMI-DVI adapter cable or component video cable is properly

connected.

2. Turn on the TV. Adjust the TV to use the proper input (HDMI, DVI or Component).

3. Turn on the DVD player with no disc in its tray, or if the DVD player is already on, make sure

that playback is completely stopped.

4. Press the HDMI button to show the current output resolution. Each subsequent press of the

HDMI button switches the output resolution in the following sequence:

NTSC output:

480i Æ 480p Æ 720p 60Hz Æ 1080i 60Hz Æ Back to 480i again

PAL output:

576i Æ 576p Æ 720p 50Hz Æ 1080i 50Hz Æ Back to 576i again

5. The selected output resolution will be briefly displayed on the upper left corner of the TV screen

as well as on the DVD player’s front panel LED display.

NOTES

• Some TV sets do not support one or more HDMI output resolutions (particularly 480i). In this

case repeatedly press the HDMI button until a supported resolution is selected. Give your

display a second or two to “grab on” to the new signal and attempt to display a picture.

Page is loading ...

Oppo DV-970HD User manual

This manual is also suitable for

Oppo DV-970HD User manual

Related papers

Other documents