Eurotherm Programmer 125 & Auxiliary Unit 126 provide smooth rise and fall temperature programs for various industrial and research applications. Used with a temperature controller, it generates a linear ramp voltage simulating a rate-of-change in sensor voltage. This voltage is injected in series with the sensor input, causing the controller's output and the load temperature to change accordingly. Ideal for heat treatment and temperature cycling processes.
Eurotherm Programmer 125 & Auxiliary Unit 126 provide smooth rise and fall temperature programs for various industrial and research applications. Used with a temperature controller, it generates a linear ramp voltage simulating a rate-of-change in sensor voltage. This voltage is injected in series with the sensor input, causing the controller's output and the load temperature to change accordingly. Ideal for heat treatment and temperature cycling processes.
Eurotherm Programmer 125 & Auxiliary Unit 126 provide smooth rise and fall temperature programs for various industrial and research applications. Used with a temperature controller, it generates a linear ramp voltage simulating a rate-of-change in sensor voltage. This voltage is injected in series with the sensor input, causing the controller's output and the load temperature to change accordingly. Ideal for heat treatment and temperature cycling processes.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI