Waterco Britestream Multicolour LED Light Synchronisation Operating instructions

Notes:

1. ColourselectionisachievedbyswitchingthelightswitchON/OFF.

2. ThelastselectedcolourwillbethedefaultcolourafterswitchinglightsOFFforat

least15seconds.

3. MK2Lightsareequippedwith‘ResetColour’functionforusewhenmultiplecoloured

lightsfailtosynchronize.

To Reset Colour :

 a)SwitchlightsON&OFFrapidly14timesuntilalllightschangetowhitecolour

 b)Leavethewhitecolourlightsturned‘ON’foratleast15seconds

 c)Thenturn‘OFF’foratleast30seconds,andturn‘ON’backagaintoselect

desiredcolourorrampingmode.

Installation Note:

Inordertoensuresynchronizationofcolour,

allpoollighttransformersmustbeconnected

toasingleisolatingswitchtocontrolthelights.

SWITCH SEQ NO COLOURS & MODES SELECTION

1 WHITE

2 SLOWCHANGINGCOLOURS-20SECRAMPING

3 FASTCHANGINGCOLOURS-5SECRAMPING

4 BLUE

5 MAGENTA

6 RED

7 YELLOW-GREEN(GOLD)

8 GREEN

9 AQUA

MULTICOLOURED

LED LIGHT MK2

(W33659)02/2010