Posiflex TX-4700 User manual

Brand: Posiflex

Model: TX-4700

Type: User manual

Package Contents

 TX-4700 POS box (x 1)

 12VDC/60W power adaptor

(x 1)

 Power cord (x 1)

 User manual (x 1)

Product Features

 Flexible use for all verticals, cache box, kitchen video and more

 VESA mounting for flexible deployment

 Industrial-class embedded CPU and operating systems

 Ultra small footprint

 Fanless and ventless

 Ruggedized design

 Allowed to activate power output to COM and VGA ports via

BIOS settings

 Allowed to integrate with optional Powered USB, 2

VGA, and

DB9 (COM5/6) ports.

14570900010 Ver. Original

http://www.posiflex.com

TX-4700 Fanless POS Box

User Manual

Views of the TX-4700

Front View

Rear View

Bottom View

I/O Interface

Power Button

USB 2.0 Port

Power Status LED Indicator

PS2 Port for Keyboard

Rubber Pad

View of Rear I/O Interface of TX-4700

Line out

USB 2.0 ports

VGA 2 port (optional)

PCI slot (optional)

PoweredUSB Ports (optional)

LPT Port

12 VDC-IN power jack

RJ11 cash drawer (CR) port

VGA 1 port

COM (DB9) ports

(COM5/6 are optional )

RJ45 LAN port

Connecting Power Adapter and I/O Cables

Please follow the steps described below to connect power adapter and

I/O cables. Please be informed the COM ports

1. Connect power adapter to DC-IN power

connector on the I/O plate

2. Connect another end of power adapter to the electrical outlet.

Mounting the TX-4700 on the Wall (Optional)

1. Refer to WB-4200 installation guide to fix

the wall mount bracket onto the wall using

plastic anchors and screws.

2. Insert four screw bolts into the 4 screw bolt

holes.

3. Align 4 screw bolts to four mounting holes

of the wall-mount bracket as shown in the

figure. Then slide down the system along

the rail until it is locked into place with a

click sound.

Powering ON/OFF TX-4700

Power ON TX-4700

Press down the power button to power on TX-4700.

Power OFF TX-4700

In most cases, push the power button again to power the

system off. However, if TX-4700 halts for unknown

reasons, please be advised to hold the power more than

10 seconds to initiate a forced shutdown.

Power Status LED Indicator

Power LED indicator is mainly responsible for notifying users of the

current system status by emitting various LED signals. The chart

provided below will offer helpful information that you need to interpret

LED status.

LED

Status

Description

POWER

Solid green

System power ON

Solid red

System standby

Installing Optional Peripheral Devices

TX-4700 can work with multiple optional peripheral devices, such as

LCD monitor, cash drawer and the like. Before installing an optional

peripheral device, make sure that the system is powered off and the

external power source is removed from the POS box to prevent electric

hazard. For the detailed instruction, refer to each of the user manuals of

the optional peripheral devices.

Installing an Operating System

You are highly advised not to install an operating system on

TX-4700 without professional instructions. Not only might the careless

handling during installation cause irreversible damage to your machine,

but also improper installation likely leads to system malfunction or

failure. Please contact with your dealers about the issues of operating

system installation.

Operating System Recovery

For TX-4700 models with preloaded operating systems, you are not

encouraged to recover your system without the help of system

integrators. Please be advised to contact your service center for further

assistance with system recovery.

Operation Environment

To prevent TX-4700 from overheating, it is suggested to position your

terminal in a well-ventilated working environment. In doing so, please

be advised to keep the POS box at least 25mm away from other devices

to ensure the machine is properly cooled down and functioning

normally.

Specifications

TX-4700

CPU

Intel® Celeron® processor J1900, 2.0 GHz

System Memory

DDR3L SO-DIMM socket x 1, up to 4GB

Storage Port

2 x SATA port + 1 x eMMC connector

Power Supply

12V/60W, or upgraded to 12V/150W for 12V/24V PoweredUSB

support

OS support

Windows 7/ Windows 10 IoT / POSReady 7/

Windows Embedded 8.1 Industry/ DOS by request

Serial Port

Max. 6 ports,

4 x DB-9 ports(COM1/2/3/4)+ 2 x optional DB-9 ports(COM5/6)

Parallel Port

1 x DB-25 connector

Standard

USB Port

7 x USB 2.0 External Ports (one port on the front panel, and the

other 6 ports on the rear I/O panel) + 1 x USB 2.0 Internal Port

LAN Port

1 x 10 /100 /1000 Mb

Display Port

1 x VGA interface + optional 2

VGA

CR Port

1 port, controlling 2 CRs (24V CR port adaptor as option)

PS/2 Port

1 port

DC Jack

1 port

Extension Slot

1 x M.2-PCIe for WIFI module + 1 x PCI/PCIe (optional)

WIFI/BT

Optional, M.2 WIFI + BT module with internal antenna

supporting IEEE 802.11 a/b/g/n, 2.4GHz/5GHz dual band

Audio

Line out + 1 x 2W speaker

LED Indicator

Bi-color power LED

Power Switch

Soft Switch (on front I/O plate)

PoweredUSB

port

Optional, 1 x 24V + 1 x 12V (on rear I/O plate)

Environmental

Requirements

Operating :

0°C - 40°C, 20%RH - 90%RH (Equipped with HDD)

Storage :

-20°C - 70°C, 10%RH - 90%RH

※

The product information and specifications are subject to change

without prior notice. To get the detailed information on TX-4700, please

check this model from Posiflex Global Website

(http://www.posiflex.com/en-global/Download/download).

<MEMO>

Posiflex TX-4700 User manual

Posiflex TX-4700 User manual

Posiflex TX-4700 User manual

Related papers

Other documents