Lithium-ion Battery Case for Galaxy S3
qsg Q10309 Copyright © 2013 Aluratek, Inc. All Rights Reserved.
aluratek.com
Quick Start Guide
AGPC03W
Installation
Charging
For more information, please visit: http://aluratek.com/warranty-return-policy
You can register your product online at: http://aluratek.com/product-registration
E-mail: [email protected]
Web: www.aluratek.com/support
Local (Tustin, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect in material or workmanship for
1 Year from the date of purchase.
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
Tech Support & Warranty Information
No need to take the Galaxy S3 out of the case. Simply use the included
Micro USB cable and plug into any USB port on your computer or the
orginal iPhone power adapter (not included).
The LED’s located on the back of the device will blink when charging.
The capacity is shown by the number of LED’s.
When the case is powered on, the Galaxy S3 is charging and/or using
the power from the case battery. If the Galaxy S3 is drained of power, the
case will first charge your Galaxy S3. If the Galaxy S3 is fully charged,
the battery will drain from the case battery first before using the Galaxy
S3’s battery.
To check the battery status, press the button located on the back of the
case. Four LED’s means the case is fully charged, and one LED means
it is almost empty.
LED battery status
indicator tells you exactly
how much power is left
Sleek hardshell case
provides added
protection against
drops and scratches
Fast Charging -
Lithium-ion battery
(2300mAh) doubles the
battery life of your Galaxy
S3. Simply slide your S3
into the case and ensure
the S3 is well connected to
the micro USB connector.
/