Page is loading ...
A19 Smart LED Bulb
Installation Guide
System Requirements:
Apple IOS 8 or higher
Android TM 4.1 or higher
2.4 GHz Wi-Fi Channel
No Hub Required
For information on connecting your
bulbs, and all other information,
please visit:
SimplyConserve.com
Warranty
This lamp is warranted to be free from defects in
material and workmanship for one year from the
date of purchase. Warranty is limited to repair or
replacement of lamp.
Illuminate a World of Possibilities
Change the brightness and color of your bulbs
based on your daily activity. Bring them to life by
naming, grouping and sharing your smart bulbs.
With the touch of a nger or the ease of voice
control, you can monitor and adjust your lights
from anywhere.
Voice Control
Pair your smart bulb with Amazon Alexa or
Google Assistant for voice control.
Caution
Suitable for use in damp locations. This device is
not intended for use with emergency xtures or
emergency lights. This lamp should not be used
with dimmers. 2.4 GHz Wi-Fi Channel is
required for setup. When installing, make sure
that power is switched o before connecting or
disconnecting the lamp. For more information,
please visit: www.simplyconserve.com/smart.
For troubleshooting information,
please visit:
www.simplyconserve.com/smart.
Connecting your Bulb
Step 1:
Download the Simply Conserve app from
the App Store
TM
or the Google Play
TM
store.
Step 2:
Follow instructions to register a new account.
Step 3:
Install and power on bulb.
Step 4:
Tap “Add Device” in the Simply Conserve app.
Step 5:
Turn the bulb on and o 3 times to set it into
“rapid blinking mode.” If the bulb is not blinking
rapidly, follow the apps instructions via the
“Help” link.
Step 6:
Once the bulb is blinking, tap “Conrm light
blinks rapidly.”
Step 7:
Enter your Wi-Fi network and password to
connect bulb.
Step 8:
Bulb will begin to pair with the Simply
Conserve app.
Step 9:
After successful pairing, rename your bulb.
Step 10:
Control your bulb with the Simply Conserve app.
Get the Simply Conserve App
/
