Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas
Range on Gas Oven, Island 1 Side
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on Gas Oven, Island 1
Side
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on
Gas Oven, Island 1 Side
584271 (GC1G34A1B)S90 6 OPEN GAS BURNERS
(123,000 BTU), GAS OVEN,
ISLAND, 1SIDE OPERA TION
Unit to be Electrolux S90 Heavy Duty three 17,000 BTU (5 kW) and three 24,000
BTU (7 kW) burner gas range with heavy duty 24,000 BTU (7 kW) standard gas
oven. Unit to be installed in central island type installations with operations from
one side. High efficiency burners with continuous power regulations to high power
of 123,000 BTU’s (36 kW). Thermocouples as standard on burners and oven for
added safety. Body and open base of unit entirely in 304 Stainless steel. Pan
supports in heavy duty cast iron. Unit shall have heavy duty 304 Stainless steel
internal frame with reinforcement on the top of 3 mm. Extra strength work top in
heavy duty 3 mm Stainless steel. “Lastertec” connection system permits units to
be connected to each other creating a seamless work top.
Main Features
•Unit for island type installation with operations by chef from
one side (knobs only on one side of the console).
•The three 5 kW and three 7 kW high efficiency burners suit
high performing cooking requirements for the most
demanding customers.
•Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Base compartment consists of a gas heated standard oven
with gas fired burner for base heat. Ovens equipped with
one Chrome-plated grid and one enameled baking tray.
•7 kW Gas oven is with thermostatic valve and thermocouple
safety device.
•Oven temperature up to 340 °C
•Thick steel base plate in the oven for an even temperature
distribution and storage.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Included Accessories
•1 of Baking sheet 2/1 GN for ovensPNC 910651
•1 of Grid, chromium plated, for ovens 2/1
GN
PNC 910652
•6 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
•Stainless steel front and back kicking
strips, 1500mm
PNC 911601 ❑
•Stainless steel front kicking strip, 1500mmPNC 911602 ❑
•Kit for back to back installation PNC 911619 ❑
•Stainless steel kicking strips, both sides,
left and right
PNC 911638 ❑
•Stainless steel kicking strips, against wall
installation, left and right
PNC 911639 ❑
•Steel plinth both sides back to back
installation, left and right
PNC 911640 ❑
•Kit for wall mounted installation for units
700mm high
PNC 911670 ❑
•Lower side panel (300mm) for wall
mounted installation for units 700mm
high, leftside
PNC 911671 ❑
•Side panel, freestanding installations (units
without rear C-board)
PNC 911949 ❑
•Side panel, back to back, rightPNC 911952 ❑
•Side panel, back to back, leftPNC 911953 ❑
•Side panel, back to back, rightPNC 911954 ❑
•Side panel, back to back, leftPNC 911955 ❑