Page is loading ...
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas
Range on Open Base, 1 Side
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on Open Base, 1 Side
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on
Open Base, 1 Side
584266 (GC1G31A1B)S90 6 OPEN GAS BURNERS
(123,000 BTU), OPEN BASE,
1SIDE OPERATION
Unit to be Electrolux S90 Heavy Duty three 17,000 BTU (5 kW) and three
24,000 BTU (7 kW) burner gas range on open base. Unit to be installed in
central island type installations with operations from one side. High
efficiency burners with continuous power regulations to high power of
123,000 BTU’s (36 kW). Thermocouples as standard on burners for added
safety. Body and open base of unit entirely in 304 Stainless steel. Pan
supports in heavy duty cast iron. Unit shall have heavy duty 304 Stainless
steel internal frame with reinforcement on the top of 3 mm.
Extra strength work top in heavy duty 3 mm Stainless steel.
“Lastertec” connection system permits units to be connected to each other
creating a seamless work top.
Main Features
•Unit for island type installation with operations by
chef from one side (knobs only on one side of the
console).
•The three 5 kW and three 7 kW high efficiency
burners suit high performing cooking requirements
for the most demanding customers.
•Manual gas valves with fixed high and low
positions allow precise control of the flame
intensity.
•Large sized pan support in cast iron (stainless
steel as option) with long center fins to allow the
use of the largest down to the smallest pans.
•Open base compartment for storage of pots, pans,
sheet pans, etc.
•Flat deep drawn spillage area with removable pan
supports, burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless
steel with reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless
work top when units are connected to each other.
•Unit delivered with four 200 mm legs as standard
(all round Stainless steel kick plates as option).
Included Accessories
•6 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
•Solid top plate for open burner,
360x360mm
PNC 910718 ❑
•Flexible connection hose 3/4"PNC 910720 ❑
•Pan rest CNS, 430x380mmPNC 910729 ❑
•Shelf fixation, one side open bases and hot
cupboards
PNC 910771 ❑
•Shelf for open bases and hot cupboards,
for appliances with W=700 & 800mm - 1
side
PNC 910780 ❑
•Side panel, freestanding installations (units
without rear C-board)
PNC 911527 ❑
•Stainless steel front and back kicking
strips, 1500mm
PNC 911601 ❑
•Stainless steel front kicking strip, 1500mmPNC 911602 ❑
•Kit for back to back installation PNC 911619 ❑
•Stainless steel kicking strips, both sides,
left and right
PNC 911638 ❑
•Stainless steel kicking strips, against wall
installation, left and right
PNC 911639 ❑
•Steel plinth both sides back to back
installation, left and right
PNC 911640 ❑
•Kit for wall mounted installation for units
700mm high
PNC 911670 ❑
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas
Range on Open Base, 1 Side
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on Open Base, 1 Side
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2009.10.24
Front
Top
EQ=Equipotential screw
G=Gas connection
Side
Gas
Gas Power:
584266(AGGYJAGJGO)122724 Btu/hr (36 kW)
Gas Type Option:
Natural Gas;Butane/Propane;
Town Gas on request
Gas Inlet:3/4" NPT
Natural gas - Pressure:7" w.c. (17.4 mbar)
LPG Gas Pressure:11" w.c. (27.7 mbar)
Key Information
Storage Cavity Dimensions
(width):540 mm
Storage Cavity Dimensions
(height):358 mm
Storage Cavity Dimensions
(depth):738 mm
Net weight:270 kg
Shipping weight:210 kg
Shipping height:900 mm
Shipping width:1500 mm
Shipping depth:900 mm
Shipping volume:0.69 m³
If appliance is set up or next to or against temperature sensitive
furniture or similar, a safety gap of approximately 150 mm should be
maintained or some form of heat insulation fitted.
/