Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas
Range on Electric Oven, 1 Side
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on Electric Oven, 1 Side
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on
Electric Oven, 1 Side
584276 (GC1G33A1C)S90 6 OPEN GAS BURNERS
(123,000 BTU), ELECTRIC
OVEN, 1SIDE OPERATION
Unit to be Electrolux S90 Heavy Duty three 17,000 BTU (5 kW) and three
24,000 BTU (7 kW) burner gas range on electric oven. Electric characteristics
to be 400V three phase. Unit to be installed in central island type installations
with operations from one side. High efficiency burners with continuous
power regulations to high power of 123,000 BTU’s (36 kW). Thermocouples
as standard on burners and oven for added safety. Body and open base of
unit entirely in 304 Stainless steel. Pan supports in heavy duty cast iron.
Unit shall have heavy duty 304 Stainless steel internal frame with
reinforcement on the top of 3 mm. Extra strength work top in heavy duty 3
mm Stainless steel. “Lastertec” connection system permits units to be
connected to each other creating a seamless work top.
Main Features
•Unit for island type installation with operations by chef from
one side (knobs only on one side of the console).
•The three 5 kW and three 7 kW high efficiency burners suit
high performing cooking requirements for the most
demanding customers.
•Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Base compartment consists of an electric heated standard
oven for base heat. Ovens equipped with one chrome plated
grid and one enameled baking tray.
•Oven temperature up to 350 °C
•Thick steel base plate in the oven for an even temperature
distribution and storage.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Included Accessories
•1 of Baking sheet 2/1 GN for ovensPNC 910651
•1 of Grid, chromium plated, for ovens 2/1
GN
PNC 910652
•6 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
•Solid top plate for open burner,
360x360mm
PNC 910718 ❑
•Flexible connection hose 3/4"PNC 910720 ❑
•Pan rest CNS, 430x380mmPNC 910729 ❑
•Shelf fixation, one side open bases and hot
cupboards
PNC 910771 ❑
•Shelf for open bases and hot cupboards,
for appliances with W=700 & 800mm - 1
side
PNC 910780 ❑
•Side panel, freestanding installations (units
without rear C-board)
PNC 911527 ❑
•Stainless steel front and back kicking
strips, 1500mm
PNC 911601 ❑
•Stainless steel front kicking strip, 1500mmPNC 911602 ❑
•Kit for back to back installation PNC 911619 ❑
•Stainless steel kicking strips, against wall
installation, left and right
PNC 911639 ❑