Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas
Range on Open Base C-Board
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on Open Base C-Board
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on
Open Base C-Board
584270 (GC1G31C1B)S90 6 OPEN GAS BURNERS
(123,000 BTU), OPEN BASE,
CB, 1SIDE OPERATION
Unit to be Electrolux S90 Heavy Duty three 17,000 BTU (5 kW) and three
24,000 BTU (7 kW) burner gas range on open base. High efficiency burners
with continuous power regulations to high power of 123,000 BTU’s (36 kW).
Thermocouples as standard on burners for added safety. Unit to have raised
rear c-board for against the wall or back to back unit installation. Body and
open base of unit entirely in 304 Stainless steel. Pan supports in heavy duty
cast iron. Unit shall have heavy duty 304 Stainless steel internal frame with
reinforcement on the top of 3 mm.
Extra strength work top in heavy duty 3 mm Stainless steel.
“Lastertec” connection system permits units to be connected to each other
creating a seamless work top.
Main Features
•The three 5 kW and three 7 kW high efficiency burners suit
high performing cooking requirements for the most
demanding customers.
•Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Open base compartment for storage of pots, pans, sheet
pans, etc.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Raised rear C-Board permits unit to be connected up against
the wall for better hygiene.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Included Accessories
•6 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
•Solid top plate for open burner,
360x360mm
PNC 910718 ❑
•Flexible connection hose 3/4"PNC 910720 ❑
•Pan rest CNS, 430x380mmPNC 910729 ❑
•Shelf fixation, one side open bases and hot
cupboards
PNC 910771 ❑
•Shelf for open bases and hot cupboards,
for appliances with W=700 & 800mm - 1
side
PNC 910780 ❑
•Side panel, wall mounted or against the
wall, right (units 700mm high)
PNC 911528 ❑
•Side panel, wall mounted or against the
wall, left (units 700mm high)
PNC 911530 ❑
•Stainless steel front kicking strip, 1500mmPNC 911602 ❑
•Stainless steel kicking strips, against wall
installation, left and right
PNC 911639 ❑
•Side panel, wall mounted or against the
wall, right (units 700 mm high)
PNC 911950 ❑
•Side panel, wall mounted or against the
wall, left (units 700 mm high)
PNC 911951 ❑