Mode d'Emploi pdf Garmin Forerunner 310 XT User manual

quick release instructions

instructions de montage rapide

Istruzioni di rilascio rapido

anweisungen zur schnellwechselhalterung

instrucciones de desmontaje rápido

instruções de libertação rápida

instructies voor snelsluiting

vejledning til quick release

pikakiinnitysohjeet

hurtigutløserinstruksjoner

instruktioner för snabbkoppling

Forerunner

®

310XT

2 Quick Release Instructions

See the Important Safety and Product

Information guide in the product

box for product warnings and other

important information.

Quick Release Kit

Quick release bracket

Bike mount

Wristband

Cable ties (2)

Spring pin tool

When the bracket and mounts are properly

installed, you can move your Forerunner

quickly from your handlebars to your wrist.

note: For more information, see the

Forerunner 310XT Owner’s Manual.

Limited Warranty

Garmin’s standard limited warranty applies to

this accessory. For more information, see the

Important Safety and Product Information in

the Garmin product box.

•

Quick Release Instructions 3

Step 1: Remove the

Wristband

1. Insert the tip of the spring pin tool in the pin

access hole.

2. Push inward towards the wristband, and

then release the spring pin outward.

3. Repeat for the other spring pin. Be careful

not to lose the spring pins.

Spring pin tool

Pin access holes

Step 2: �nstall the Quick�nstall the Quick

Release Bracket

1. Verify that the arrow on the back of the

quick release bracket is pointing up and

your Garmin device is facing up.

2. Use the spring pin tool to install the bottom

spring pin back into the Forerunner.

3. Insert the top spring pin into the top slot of

the quick release bracket.

4 Quick Release Instructions

4. Slide the open end (bottom) of the quick

release bracket onto the bottom spring pin

of the Forerunner.

Quick release

bracket

5. Using the spring pin tool, install the top

spring pin of the quick release bracket

into the top slot of the Forerunner. Your

Forerunner and the bracket are now one

movable unit.

Step 3: �nstall the Bike

Mount

You can install the bike mount on any part of

your handlebars or on the stem. Ensure that

the Garmin unit is facing up for the best GPS

reception.

1. Place the bike mount on your handlebars or

stem.

2. Attach the bike mount securely using two

cable ties.

Quick Release Instructions 5

Cable ties

Handlebar

Center screw

Bike mount

For vertical bars: remove the center screw,

turn the front plate 90 degrees, and replace

the center screw.

Now you can attach the Forerunner to the

bike mount.

3. Align the quick release bracket with the

front plate of the bike mount so that the unit

is vertical.

4. Press and turn the unit clockwise until it

snaps into place horizontally.

6 Quick Release Instructions

Step 4: Move the

Forerunner From the Bike

Mount to the Wrist Mount

1. Turn the Forerunner 90 degrees

counterclockwise to separate it from the

bike mount.

2. Align the quick release bracket with the

front of the wrist mount so that the unit is

horizontal.

3. Press and turn the unit 90 degrees

clockwise until the it snaps into place

vertically.

Page is loading ...

For the latest free software updates

(excluding map data) throughout the life

of your Garmin products, visit the Garmin

Web site at www.garmin.com.

Garmin International, Inc.

1200 East 151

st

Street, Olathe, Kansas 66062,

USA

Garmin (Europe) Ltd.

Liberty House, Hounsdown Business Park,

Southampton, Hampshire, SO40 9LR UK

Garmin Corporation

No. 68, Jangshu 2nd Road, Shijr, Taipei County,

Taiwan

www.garmin.com

May 2009

Part Number 190-01064-91 Rev. B

Printed in Taiwan

Mode d'Emploi pdf Garmin Forerunner 310 XT, 310XT, Forerunner 310XT, Forerunner® 310XT User manual

Related papers

Other documents