The Great Outdoors 72456-143C User manual

The Great Outdoors
Brand
The Great Outdoors
Model
72456-143C
Type
User manual
INSTALLATION INSTRUCTIONS
For Model 72456-143C
WARNING! SHUT POW ER O FF AT FUSE O R CIR CUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
HANGING THE FIXTURE (Fig. 1)
1. Shut off the power at the circuit breaker and remove
the old fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any small
parts necessary for installation.
3. Take off the cage (I) by loosening four thumb screws
(E) by using the Allen wrench (D).
4. Put the glass into the fixture (I), secure with Metal plate
(H) and thumb screw (G) tighten with screw driver (Not
supplied)
5. Install the bulb (T10 Medium base, not included) in
accordance with the fixture’s specification. Attach the
cage (I) back to the post cup (A) (not provided) by four
thumb screws (E) by using the Allen wrench (D).
DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
(NE PAS DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
CONNECTINE THE WIRES (Fig.2)
6. While supporting the fixture, connect the electrical
wires as shown in figure 2. If your post has a ground
wire (green or bare copper), connect the fixture ground
wire to it. If not, consult your electrician for proper
grounding. After the wires are connected, tuck them
carefully inside the post (A).
COMPLETING THE INSTALLATION (Fig. 1)
7. Place the fixture onto post cup (A)(not provided), and
secure with the 3 mounting screws (B)
Your installation is now complete. Return power to
the junction box and test the fixture
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
  • Page 1 1

The Great Outdoors 72456-143C User manual

The Great Outdoors
Brand
The Great Outdoors
Model
72456-143C
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents