Commercial Electric 5016-BL Operating instructions

Type
Operating instructions

This manual is also suitable for

1
Installation
2
Wiring scheme A is for residential.
Wiring scheme B is for commercial.
PLACING THE WIRES TERMINATING THE JACK
Installation Guide
Category 6 Jack
Item #1000015551, 1000015553, 1000015570,
1000981571
Model #5016
PACKAGE CONTENTS
A - (1) Category 6 Jack
TOOLS NEEDED
- Wire Cutters
*To meet TIA/EIA 568 standards, only use CAT 6 23AWG network cable.
Remove 2 1/2” of cable jacket and insert cable into
Cat 6 Jack using the wiring standards on the
diagram in Step 1.
Please read all instructions and safety information before use.
Retain this manual for future reference.
Safety Information
B - (1) Punch Down Tool
C - (1) Plastic Dust Cover
B
A
3 TRIMMING THE WIRES
Use wire cutters to remove the excess wire.
4 INSTALLING THE DUST COVER
Place Dust Cover (C) over jack and snap into place.
A
Brown/White
Brown
Orange
Orange/White
Blue
Blue/White
Green/White
Green
C
Brown/White
Brown
Green
Green/White
Blue
Blue/White
Orange/White
Orange
Diagram B
Diagram A
Punch down all wires on the jack (A) using the
included plastic punch-down tool (B).
*NOTE* Do not twist or break off excess wire.
*NOTE* Dust Cover (C) cannot be used to punch-down wires.
T568
Wiring Standard
CAUTION: When using tools always follow the
manufacturer’s safety guidelines.
RoHS Compliant
49MM
LISTED
E333898
  • Page 1 1

Commercial Electric 5016-BL Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI