Page is loading ...
□ □
1
Installation
2
Wire diagrams below show wiring scheme for both Cat 5e and
Cat 3 cable. Follow diagram 1 if you are using Cat 5e cable.
Follow diagram 2 if you are using Cat 3 cable.
PLACING THE WIRES TERMINATING THE JACK
Installation Guide
Voice Grade Jack
Item #1000023234
Model #5023
PACKAGE CONTENTS
A - 1 Category 3 Voice Grade Jack
Punch down all wires in the jack (A) using the included plastic
punch-down tool (B).
CAUTION: When using tools always follow the
manufacturer’s safety guidelines.
Please read all instructions and safety information before use.
Retain this manual for future reference.
Safety Information
B - 1 Punch Down Tool
C - 1 Plastic Dust Cover
B
A
□
3 TRIMMING THE WIRES
Use wire cutters to remove the excess wire. □
4 INSTALLING THE DUST COVER
Install the dust cover (C) after all wires are punched down and
excess wire is removed.
A
Orange
Orange/White
Blue Blue/White
Green/White
Green
Diagram 1
Diagram 2
Orange
Black
Green
Yellow
C
RoHS Compliant
49MM
LISTED
E333898
/
