Rivet ALT17032519 User manual

ASSEMBLY INSTRUCTION

ASIN NO. : B073751DMJ

In order to ensure safety and maximize the lifetime of the lamp, please

make sure to read the following instructions thoroughly before assembly.

Assembly Instructions:

Note: Electrical wire is connected continuously through the poles.

Please DO NOT pull wire during unpacking. Bad connections may result.

1. Unpack all parts from carton carefully.

2. Place Fabric Shade (C) onto Socket.

3. Place Lamp Holder Ring (B) onto Socket.

4. Place LED Bulb (A) onto the Socket.

5. Assembly is completed.

WARNING:

1. Use Type A Bulb of LED 10W maximum (Bulb included)

2. Do not use polishes or cleaners on your lamp.

Simply wipe clean with a soft cloth.

Made in China