Rivet ALT0316019 User manual

ASSEMBLY INSTRUCTION

ASIN NO. : B07374SBFL

In order to ensure safety and maximize the lifetime of the lamp, please

make sure to read the following instructions thoroughly before assembly.

Assembly Instructions:

Note: Electrical wire is connected continuously through the poles.

Please DO NOT pull wire during unpacking. Bad connections may result.

1. Unpack all parts from carton carefully.

2. Place Iron Pipe (B) onto Base (A) assembly.

3. According to the assambly sequence, Iron Pipe (C) onto Iron Pipe (B) , Metal Shade

part(D) onto Iron Pipe(C).

4. Place LED Bulb (E) onto the Socket.

5. Assembly is completed.

WARNING:

1. Use Type A Bulb of LED 10W maximum (Bulb included)

2. Do not use polishes or cleaners on your lamp.

Simply wipe clean with a soft cloth.

Made in China