Seville Classics SHE18370BZ User manual

  • Hello! I am an AI chatbot trained to assist you with the Seville Classics SHE18370BZ User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Additional parts and accessories are available for purchase (separately)
via our online store: www.sevilleclassics.com
18x36 Extra Shelf - Item #: SHE18366
Shelf Liners (2 Pack) - Item #: WEB046
Shelf Labels (8 Pack) - Item # WEB106
S-Hooks (6 Pack) - Item # WEB232
CAUTION:
DO NOT STAND ON OR CLIMB ON THE SYSTEM. DO NOT DROP HEAVY
ITEMS ON THE SYSTEM SHELVES. PLACE HEAVIER ITEMS ON THE
LOWER SHELVES AND LIGHTER ONES ON TOP. DO NOT MOVE THE
SYSTEM WHILE LOADED.
WARNING:
HOLDS 500 LBS (226.8 KG) TOTAL ON WHEELS.
HOLDS 600 LBS (272.2 KG) PER SHELF ON LEVELING FEET.
HOLDS 3,000 LBS (1360.8 KG) TOTAL ON LEVELING FEET.
If you are missing any parts, have any questions, or need additional
assistance in assembly, please contact our customer service
department.
READ & SAVE THESE INSTRUCTIONS ©2012 Seville Classics, Inc.
TF150923
5-SHELF COMMERCIAL SHELVING
Model No. 18370
ASSEMBLY INSTRUCTIONS
Customer Service
Tel 1.310.533.3800
Tel 1.800.323.5565
Fax 1.310.533.3899
Monday - Friday 8:30 am - 4:30 pm PST
Seville Classics, Inc.
Torrance, CA 90501 USA
www.sevilleclassics.com
Please read and save these instructions
©2012 Seville Classics, Inc.
Please make sure you have all the parts before starting assembly.
A
4 pcs
B
4 pcs
C
20 pairs
D
5 pcs
Top Poles
Bottom Poles
Slip Sleeves
Shelves
Plastic cap (top)
Threaded end (bottom)
E
2 pairs
F
4 pcs
Wheels
Leveling Feet
locking
Step 1:
Screw Wheels (E) or Leveling Feet (F)
into Bottom Poles (B).
Step 2:
On the bottom of each pole, fasten a pair of Slip Sleeves (C) around the
grooves at the desired shelf height.
Note: Double grooves are for sight measurement.
Step 3:
Slide a Shelf (D) over the top of 4 bottom
poles until it rests snugly over the sleeves.
Tip: It is easier to do this step with the unit
on its side. If necessary, use a rubber mallet
to further secure the shelf.
Step 4:
Repeat steps 2 and 3 by attaching slip
sleeves and another shelf at the desired
height.
Step 5:
Once the unit is stable and upright, screw the
Top Poles (A) into the bottom poles and add
the remaining shelves to complete the unit.
Scan code or visit link to view an assembly video:
www.sevilleclassics.com/shelvingassembly
/