Noble House 295082 Operating instructions

Type
Operating instructions

This manual is also suitable for

Noble House 295082 is a swivel barstool designed for use on flat, level surfaces. It features a sturdy iron plate and leg base with pre-attached levellers for stability and adjustable height. The barstool is easy to assemble, requiring only basic tools and following the step-by-step instructions provided in the manual. Once assembled, the barstool can be used for various purposes, such as seating at a kitchen counter or bar, or as an extra seat in a living room or den.

Noble House 295082 is a swivel barstool designed for use on flat, level surfaces. It features a sturdy iron plate and leg base with pre-attached levellers for stability and adjustable height. The barstool is easy to assemble, requiring only basic tools and following the step-by-step instructions provided in the manual. Once assembled, the barstool can be used for various purposes, such as seating at a kitchen counter or bar, or as an extra seat in a living room or den.

No. Picture Description Qty
A
Barstool Seat 1
B
Iron Plate 1
Assembly Instructions
Caution : You must read this before you proceed.
Swivel Barstool
CAUTION : This barstool is NOT a TOY.
Keep your child / children at bay in the process of assembly.
1 OF 6
C
Barstool Leg base With Pre-
attached Leveller
1
No. Picture Description Qty
Bolts(M8*20mm
5
Washers ( 8mm ) 5
Springs Washers ( 8mm) 5
Spanner 1
Before Beginning Assembly:
Note: There are extra hardware provided for this assembly.
2 OF 6
Place all parts on a clean soft surface.
Step 1
Overview
This Barstool has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Barstool parts, the above
picture is to help you put the various Barstool parts into perspective.
Please read through the instructions herebelow to familiarise yourself
with the parts and steps before assembly.
Iron Plate(B)
Barstool Seat(A)
Barstool Leg base With Pre-
attached Leveller(C)
3 OF 6
Step 2
Place Barstool Seat onto the side of a table as seen in the picture.
Attach the Iron Plate(B) to the underside base of the Barstool Seat(A).
Align the mountings on the Iron Plate(B) with the mountings on the bottom of the
Barstool Seat(A).
Insert bolts() from the mountings on the Iron Plate to the mountings on the seat.
Put Flat washers() ,Spring washers() to the Blots,partially tighten all bolts into
position.
Once all Bolts are in postion, use Spanner () to turn lock the Bolt.
Do this in a sequential manner.
Step 3
B
A
4 OF 6
Turn the Barstool Seat(A) right sight up.
Attach the Barstool Seat(A) with attached Iron Plate to the Barstool Leg Base With
Pre-attached Leveller(C) as pictured above.
The Stem from the Iron Plate is to be aligned and fully inserted into the end of the
Barstool Leg Base Stem.
Once into its housing, exert force and weight on the Barstool seat so as to force the
Barstool Seat into a locking position into the Barstool Leg Base stem.
Notes:if the Barstool seat (A) is not sliding into the Barstool base stem
smoothly, apply extra grease to the base stem as to provide extra lubrication for
assembly.
CAUTION : At this point, ensure all bolts are fully tightened and secured.
Then adjust the Legs Pre-installed Levellers until the table is level with the ground.
To adjust the Levellers, with the help from an adult partner, tilt the Barstool to rest on
the 2 feet.
Adjust the levellers to the desired height to avoid wobbles.
The Barstool is ready for use.
Caution: This Barstool can only be used on a flat, level surface.
Step 4
adjust height for balance
adjust low for balance
5 OF 6
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of
more than 800-plus chemicals or ingredients that the California Office of Environmental Health
Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity. Chemicals
and elements on this list include wood dust, brass, and other everyday substances, which can be
found in very common household items, such as: lamps, tableware, jewelry, crystal glasses, electric
cords, beauty products, automobiles, and furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one
of the 800-plus common chemicals and ingredients listed under this law could potentially be on our
furniture or packing materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that
the hazardous exposure limits for any of these chemicals have never been found on furniture
products that we’ve shipped to our customers. Additionally, this warning label is very common and
can be found on almost every piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local
bank, grocery store, or restaurant without finding at least one warning. In fact, even the Disney Land
Resort has a Proposition 65 warning:
6 OF 6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Noble House 295082 Operating instructions

Type
Operating instructions
This manual is also suitable for

Noble House 295082 is a swivel barstool designed for use on flat, level surfaces. It features a sturdy iron plate and leg base with pre-attached levellers for stability and adjustable height. The barstool is easy to assemble, requiring only basic tools and following the step-by-step instructions provided in the manual. Once assembled, the barstool can be used for various purposes, such as seating at a kitchen counter or bar, or as an extra seat in a living room or den.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI