Noble House 295050 Operating instructions

Brand: Noble House

Model: 295050

Type: Operating instructions

This manual is also suitable for

42769

Assembly Instructions

Swivel Barstool

Caution: You must read this before you proceed.

REMINDER : In the event of unsuitability and you intend to return, please disassemble by

reversing the assembly process and where possible pack to fit into its ORIGINAL CARTON

BOX.

CAUTION : This barstool is NOT a TOY.

Keep your child / children at bay in the process of assembly.

1 of 4

No. Picture Description Qty

A Seat 1

B Iron Plate 1

C Chair Leg Base 1

No. Picture Description Qty

D Bolts (M8*40MM) 5

E Flat Washers 9

F Spring Washers 5

G Nuts 5

H Spanners 2

Before Beginning Assembly:

2 of 4

Step 1

Attach the Iron Plate to the Seat.

Align the holes on the bottom of the seat with the holes on the Iron Plate.

Insert Flat washers(E) to the Bolts(D), then insert the bolts from the holes on the seat to the

holes on the Iron Plate.

Put Flat washers(E) + Spring washers(F) + Nuts(G) to the Blots,partially tighten all bolts into

position.

Once all Bolts and Nuts are in postion, use one Spanner (I) to hold the Bolt, and the other

Spanner to turn lock the Nut.

Do this in a sequential manner.

Step 2

H

H

Attach the Seat with attached Iron Plate to the Chair Leg Base as pictured above.

The Stem from the Iron Plate is to be aligned and fully inserted into the end of the Chair Leg

Base Stem.

Once into its housing, exert force and weight on the chair seat so as to force the Chair Seat

into a locking position into the Chair Leg Base stem.

Step 3

Make sure that the Chair Seat and the Chair Leg Base is fully and firmly attached together

as one complete piece

H

H

as

one

complete

piece

.

The Barstool is ready for use.

3 of 4

4 of 4

1
2
3
4

Noble House 295050 Operating instructions

Brand: Noble House

Model: 295050

Type: Operating instructions

This manual is also suitable for

42769

Download PDF

Related papers

Other documents