Logik L9BDVD11 User manual

Brand: Logik

Model: L9BDVD11

Category: DVD players

Type: User manual

Portable Blu-ray Player

Instruction Manual

L9BDVD11

L9BDVD11_IB_final110705_running change.indd 1 05/07/2011 1:43 PM

L9BDVD11_IB_final110705_running change.indd 2 05/07/2011 1:43 PM

Contents

Unpacking.......................................................... 4

Product Overview ............................................. 5

Blu-ray Player ..................................................................5

Remote Control ..............................................................6

Battery Installation for the Remote Control .. 8

Remote Control Operation Range ..........................9

Power Supply..................................................... 9

Using the Mains Adapter (for indoor use) ...........9

Using in a Car ................................................... 10

Connecting for In-car Use ....................................... 10

Using the Built-in Battery ...............................11

Charging the Battery .......................................11

Connections ..................................................... 12

Connecting a TV ......................................................... 12

Connecting an Audio Receiver ............................. 13

Using USB port ............................................................ 13

Using Headphones / Earphones .......................... 14

Ethernet Socket – Connecting to a Home

Network ......................................................................... 14

Carrying Bag Installation ............................... 15

To Attach the Unit’s Case to a Headrest ............ 15

Compatible Disc Types ................................... 16

Supported Formats ................................................... 16

Region Code ................................................................. 16

Turning On the Blu-ray Player ....................... 17

Playing a Blu-ray Disc or DVD ........................ 17

Playing a Disc ............................................................... 17

Pausing Playback (Still Mode) ................................ 18

Stopping Playback ..................................................... 18

Skipping to a Dierent Track ................................. 18

Slow Forward ...............................................................18

Zooming into an image ........................................... 18

Fast Forward / Fast Reverse .................................... 18

Audio Selection .......................................................... 19

Subtitle Selection ....................................................... 19

Angle Selection ........................................................... 19

Using the PiP (Picture-in-picture) mode ........... 20

Using a Disc Pop Up Menu .....................................20

Menu Function ............................................................20

Displaying Disc Information .................................. 21

Using the Picture Menu ........................................... 21

Locating a Desired Section ............................ 21

Locating a specic title ............................................ 21

Locating a specic chapter ....................................22

Locating a specic time ...........................................22

Playing Picture Files ....................................... 23

Playing Picture Files from a disc or USB drive. 23

Repeat Playback .............................................. 23

Repeating playback (Blu-ray Disc or DVD) .......23

Repeating playback (CD) ......................................... 24

Repeating a specic section (Blu-ray Disc/DVD/

CD)....................................................................................24

Customising the Language Settings ............ 25

Customising the Video Settings .................... 26

Customising the Rating Settings .................. 27

Customising the General Settings ................ 28

Maintenance .................................................... 29

Hints and Tips .................................................. 30

Specications .................................................. 31

L9BDVD11_IB_final110705_running change.indd 3 05/07/2011 1:43 PM

Blu-ray Player x 1

Car Power Adapter x 1

(P.N.: 133-030627W010)

Carry Case x 1 & Straps x 2

(P.N.: 803-23A998-010)

AAA Batteries x 2

(P.N.: 130-115000W008

or 130-115000W009)

Video / Audio Cable x 1

(P.N.: 122-004020W218)

Mains Adapter x 1

(P.N.: 133-010901W152)

Quick Start Guide x 1

(P.N.: 810-23A995W090)

Remote Control x 1

(P.N.: 043-A15644W011)

Earphones x 2

(P.N.: 114-010331W003)

Instruction Manual x 1

(P.N.: 811-23A991W121)

Unpacking

Remove all packaging from the unit. Retain the packaging. If you dispose it please do so

according to local regulations.

The following items are included:

PUSH

OPEN

2.0+Digital Out

Thank you for purchasing your new Logik Portable Blu-ray Player.

These operating instructions will help you use it properly and safely.

We recommend that you spend some time reading this instruction manual in order that

you fully understand all the operational features it offers. You will also find some hints and

tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for

future reference.

If items are missing, or damaged please contact Partmaster (UK only).

Tel: 0844 800 3456 for assistance.

L9BDVD11_IB_final110705_running change.indd 4 05/07/2011 1:43 PM

Product Overview

Blu-ray Player

1. LCD Screen

2. DC IN 9V-12V Socket

3. AV OUT Sockets

4. HDMI OUT Sockets

5. ON/OFF/CHARGE Switch

6. VOL +/– Tuner

Adjusts the volume.

7. Earphone Sockets

8. LAN Socket

9. Speaker

10. Disc Door

Push at the right corner of the disc door

to open or close the disc door.

11. Remote Sensor Indicator

Receives the remote control signal

12. Standby Indicator

When the CHARGE/OFF/ON switch is in

the ON position you can use the remote

control to put the product in STANDBY

mode. The indicator will illuminate red

when the unit is in STANDBY mode.

13. Battery Indicator

When the battery is being charged, the

indicator will illuminate green. When

charging is completed, the light goes out.

14. Buttons

• Press to perform fast reverse / fast

forward playback.

• Press to move the cursor left/right on

the disc menu or setup menu.

STOP Button

Press to stop playing a disc.

OK Button

Press to confirm selections on a menu

screen.

Buttons

• Press to move back to the previous

chapter/tracks/titles or move forward

to the next chapters/tracks/titles on a

disc.

• Press to move the cursor up/down

on the disc menu or setup menu.

PLAY / PAUSE Button

Press to start playback or pause.

15. USB Port

L9BDVD11_IB_final110705_running change.indd 5 05/07/2011 1:43 PM

1. STANDBY/ON Button

Press to turn on the unit or put it in

standby mode.

2. Colour Buttons

When playing a Blu-ray Disc that has

a Java application, press to control

playback. For more information, see the

documentation that comes with the

Blu-ray Disc.

3. Number 0-9 Buttons

4. CLEAR Button

Press to clear input selections and cancel

certain playback functions.

5. MUTE Button

Press to turn on/o the sound.

6. Skip Button

Press to move backwards through titles,

chapters or tracks on a Blu-ray Disc, DVD

or CD.

7. POP UP Button

During Blu-ray Disc playback, press to

open a menu that lets you control Blu-ray

Disc playback.

8. Button

Press to fast reverse playback.

9. Buttons

Press to highlight selections on a menu

screen and adjust certain settings.

OK Button

Press to conrm selections on a menu

screen.

10. PICTURE Button

Press to adjust brightness, contrast,

backlight & Screen aspect ratio.

11. GOTO Button

Press to skip directly to a specic location

on a Blu-ray Disc or DVD.

12. Buttons

Press to move forward through titles,

chapters or tracks on a Blu-ray Disc, DVD

or CD.

13. Buttons

Press to fast forward playback.

Remote Control

L9BDVD11_IB_final110705_running change.indd 6 05/07/2011 1:43 PM

14. SLOW Button

Press to perform slow forward playback of

Blu-ray Discs or DVDs.

15. EXIT Button

16. PLAY Button

Press to start playback.

17. STOP Button

Press to stop playback.

18. AUDIO Button

Press to select one of the audio sound

tracks programmed on a Blu-ray Disc or

DVD.

19. INFO Button

Press to access the info menu.

20. REPEAT Button

Press to repeat chapter or title of a Blu-ray

Disc or DVD. Press to repeat a single track

or a whole CD.

21. A-B Button

Press to perform point-to-point repeat

playback on a Blu-ray Disc / DVD / CD.

22. PiP Button

Press to turn PiP (picture in picture) mode

on or off. This function is only available on

certain Blu-ray Discs.

23. SETUP Button

In stop mode, press to open or close the

SETUP menu screen.

24. PAUSE / STEP Button

• Press to pause playback

• Press repeatedly to play or move the

playback forward frame by frame.

25. ANGLE Button

Press to switch the camera angle of the

video presentation when scenes with

multiple camera angles are recorded on a

Blu-ray Disc or DVD.

26. ZOOM Button

Press to zoom in during playback of a

DVD or JPEG les.

27. SUBTITLE Button

Press to select one of the subtitle

languages programmed on a Blu-ray Disc

or DVD.

28. MENU

Press to open or close the Disc’s menu.

L9BDVD11_IB_final110705_running change.indd 7 05/07/2011 1:43 PM

2. Insert two AAA size batteries (included). Make sure to

match the (+) and (–) ends of the battery compartment.

Battery Installation for the Remote Control

1. Press and lift the back cover up to open the battery

compartment of the remote control.

3. Close the battery compartment cover.

Handling the Batteries

• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could

cause fire, personal injury or damage to property.

• Only use the battery type indicated in this manual.

• When the batteries are exhausted, the remote will not function. Replace both batteries at

the same time with new ones.

• Do not install new batteries with used ones and do not mix different types of batteries.

• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with

local regulations.

Handling the Remote Control

• Take care of your fingernails when you press and hold the battery release tab.

• Do not drop or cause impact to the remote control.

• Do not spill water or any liquid on the remote control.

• Do not place the remote control on a wet object.

• Do not place the remote control under direct sunlight or near sources of excessive heat.

• Remove the battery from the remote control when not in use for a long period of time, as it

could cause corrosion or battery leakage and may result in physical injury and/or property

damage including fire.

L9BDVD11_IB_final110705_running change.indd 8 05/07/2011 1:43 PM

Power Supply

Using the Mains Adapter (for indoor use)

To the Mains Socket

Mains Adapter (included)

Left Side of Blu-ray Player

To DC IN 9V-12V Socket

• Only use the included mains adapter. Do not use it with any other equipment.

• When the unit is not going to be used for a long period of time, disconnect the

mains adapter from the mains socket.

• When the mains adapter is plugged in, the unit is not completely disconnected

from the main power supply, even when the power is turned off.

• In order to disconnect the unit from the mains completely, the mains adapter

should be disconnected from the mains socket outlet completely.

Remote Control Operation Range

Point the remote control at the unit no more than 2 metres from

the remote control sensor and within 40° of the front of the unit.

The operating distance may vary depending on the brightness of

the room.

Within about 2 m

20° 20°

L9BDVD11_IB_final110705_running change.indd 9 05/07/2011 1:43 PM

Using in a Car

Connecting for In-car Use

The 12V car power adapter allows the unit to be used with vehicles that have a 12V, negative

ground electrical system.

Car Power Adapter

(included)

To DC IN

9V-12V

Socket

Left Side of Blu-ray Player

To Cigarette

Lighter Socket

• Disconnect the car power adapter when not in use. Not for use in 24V vehicles.

• Use the provided 12V car power adapter only. Use with other car power adapters

could damage the unit.

• Only use the included 12V car power adapter. Do not use it with any other

equipment.

• In the interest of traffic safety, do not operate this unit or view videos while driving

a vehicle.

• Make sure the unit is securely fastened to prevent it from falling or flying through

the air in the event of an accident.

• When the inside of the cigarette lighter socket is dirty with ash or dust, the plug

section may become hot due to poor contact. Be sure to clean the cigarette lighter

socket before use.

• After use, disconnect the 12V car power adapter from both the unit and the

cigarette lighter socket.

L9BDVD11_IB_final110705_running change.indd 10 05/07/2011 1:43 PM

Using the Built-in Battery

The unit has a built-in, non-replaceable, rechargeable battery. Charge the built-in battery before

using it for the first time. The normal charging time should be completed within 4-5 hours.

The green charging light will go out when the built-in battery becomes fully charged.

Charging the Battery

• The unit should not be exposed to excessive heat such as sunshine, fire or the like.

• The built-in battery present a risk of fire or chemical burn if mistreated. Do not

disassemble, heat above 100°C, or incinerate.

• Dispose of the unit with used built-in battery properly, environmental problems

must be considered and local rules or laws governing the disposal must be strictly

followed.

• The built-in battery can only be recharged when the unit is in CHARGE mode

while using the AC adapter.

• The built-in battery cannot be recharged when the unit is in power ON mode.

• Do NOT recharge the battery in the vehicle by using the car power adapter.

• Recharge the built-in battery before you are ready to use it again.

• While using the built-in battery, the environmental temperature should be 5°C to

35°C.

• To get the longest service life of the built-in battery, charge at indoor temperature.

1. To the Mains

Socket

2. To DC IN

9V-12V Socket

3. Slide the switch to CHARGE

4. Charging light ON

5. Recharging is

complete when

the charging light

goes out

Mains Adapter

L9BDVD11_IB_final110705_running change.indd 11 05/07/2011 1:43 PM

Connections

Connecting a TV

Using the supplied AV cable

If your TV has Audio/Video inputs, you can connect the unit to your TV using the supplied

AV cable.

Left Side of Blu-ray Player TV

HDMI Cable

(Not included)

Left Side of Blu-ray Player

To AV OUT

Sockets

To HDMI

Sockets

White

AUDIO IN

VIDEO IN

Red

Yellow

Audio / Video Cable (Included)

Using an HDMI cable (not included)

For TVs that support it, HDMI can provide better quality audio and video output (depending on

media source), and so is the preferred connection type. The HDMI cable incorporates both audio

and video signals, so you will have just one cable running from the unit to your TV. Using an

HDMI cable (not included), connect the HDMI OUT socket on your unit to the HDMI IN socket on

your TV or HDMI-compatible display.

• Configure the Video Setup options (found in the SETUP menu) to best match the

capabilities of your TV. Set the HDMI resolution to match the capabilities of your TV

(refer to page 26 for details on Customising the Video Settings). Note: this setting

can be selected only when the HDMI cable is connected to a TV.

• Refer to your TV owner’s manual as well.

• When you connect the unit to your TV, be sure to turn off the power and unplug

both units from the wall outlet before making any connections.

• When a HDMI cable is connected, the unit’s speaker will be mute and the audio are

output from the connected device.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI licensing LLC.

L9BDVD11_IB_final110705_running change.indd 12 05/07/2011 1:43 PM

Audio / Video Cable (Included)

Left Side of Blu-ray Player

Stereo Receiver /

Amplier

To AV OUT

Sockets

Connecting an Audio Receiver

Using the supplied AV cable

The unit will down-mix Dolby Digital or DTS multi-channel audio to stereo audio for playback on

the unit’s internal speakers or for output to a connected amplifier.

Using USB port

You can connect a USB flash drive (not included) to the USB port on the unit to play picture files.

For operation of file playback on the USB flash drive, please refer to the section “Playing Picture

Files”.

• It is recommended that the unit is turned OFF before you plug in a USB flash drive.

• It does not support USB hard disk mass storage devices, multi-card readers and

other USB computer peripherals.

• It only supports USB flash drives (FAT32/16, max. capacity 32G bytes).

• Make sure your USB flash drive is FAT16/FAT32 file system. All other file systems will

not be supported.

Make sure to use the correct cable. Connecting the plugs incorrectly may cause lack

of signal, or weak signal.

Using an HDMI cable (not included)

For TVs that support it, HDMI can provide better quality audio and video output (depending

on media source), and so is the preferred connection type. Using an HDMI cable (not included),

connect the HDMI OUT socket on your unit to the HDMI IN socket on your amplifier.

AUDIO IN

White

Red

Yellow

Left Side of Blu-ray Player

Stereo Receiver /

Amplier

HDMI Cable

(Not included)

To HDMI

Sockets

L9BDVD11_IB_final110705_running change.indd 13 05/07/2011 1:43 PM

Using Headphones / Earphones

Turn down the volume before connecting

the headphones/earphones. Slowly raise the

volume with the headphones on until you reach

your desired volume. When headphones are

connected, the speaker is automatically disabled.

For your convenience, we’ve included two

headphone sockets - allowing two users to listen

at the same time.

Ethernet Socket – Connecting to a Home Network

This socket enables you to upgrade your unit through the internet when where there is an

update available in the future. Connect this unit to a local area network (LAN) using an Ethernet

cable.

1. In STOP mode, press the SETUP button on the remote control.

2. Press the button on the unit or press the buttons on the remote control to select

General.

3. Press the buttons on the unit or press the buttons on the remote control to move the

highlight bar to the right.

4. Press the buttons on the unit or press the buttons on the remote control until you

select Software Update.

5. Press the OK button on the unit or the remote control to start update.

6. Follow the instructions on the display to finish the process.

• Maximum output voltage ≤ 150mV HEADPHONE VOLUME WARNING

• Excessive sound pressure from earphones and headphones can cause hearing loss.

Avoid listening to sound at excessive levels which could be harmful to your ears.

Left Side of Blu-ray Player

Headphones / Earphones

[1/8” (3.5mm) diameter plug] (Included)

L9BDVD11_IB_final110705_running change.indd 14 05/07/2011 1:43 PM

1. Insert the unit into the case as shown on the right (1, 2,

3).

2. Unzip the main compartment that holds the unit; locate

the D rings at the top of the case (A).

3. Locate 2 straps with hooks on each end.

4. Hook one end of each strap to the D rings at the top of

the case.

5. Criss-cross the straps around the front of the headrest (B)

and hook the straps to a second set of rings on the lower

part of the case (C).

6. Tighten up the straps until the unit is secured. Connect

the 12V car adapter as shown on the left of the unit (D).

1. High temperature damages discs.

2. Do not store in closed cars.

3. Protect from direct sunlight.

Before closing the bag, release the left and right

elastic bands from the screen panel.

Carrying Bag Installation

To Attach the Unit’s Case to a Headrest

L9BDVD11_IB_final110705_running change.indd 15 05/07/2011 1:43 PM

Compatible Disc Types

Disc Types Disc Logo Recorded Content

DVD-VIDEO (Digital Versatile Disc) AUDIO + VIDEO

DVD±RW (JPEG files)

DVD+ReWritable

JPEG

DVD±R (DVD Recordable - JPEG files) JPEG

CD-R (CD Recordable - JPEG files) JPEG

CD-RW (CD-Rewritable - JPEG files) JPEG

AUDIO-CD (Compact Disc Digital Audio) AUDIO

BD-ROM AUDIO + VIDEO

Supported Formats

JPEG

• The file extensions has to be .jpg and not .jpeg

• Pictures encoding must comply with JPEG/ISO format.

Region Code

Both the Blu-ray player and the discs are coded by region. These regional codes must match in

order to play the disc. If the codes do not match, the disc will not play.

The Region Number for this Blu-ray player is described on the rear panel of the Blu-ray player.

Disc Type DVD-VIDEO Blu-ray Disc

Region code

Some recorded files may not be able to be played due to the type and format of disc

or condition of the recording.

L9BDVD11_IB_final110705_running change.indd 16 05/07/2011 1:43 PM

Turning On the Blu-ray Player

1. Switch the ON/OFF/CHARGE button to ON on the side panel to turn the unit on.

2. The LOGIK DVD logo (start-up picture) will appear on the screen.

3. After use, switch the ON/OFF/CHARGE button to OFF on the side panel to turn the unit off.

Playing a Blu-ray Disc or DVD

This instruction manual explains the basic instructions for operating this unit. Some Blu-ray discs

or DVDs are produced in a manner that allows for specific or limited operation during playback.

Therefore, this unit may not respond to all operating commands. This is not a defect.

Please refer to the instructions accompanying the specific Blu-ray discs or DVD in question for

more information about the options available on that disc.

Unless otherwise stated, all operations described are based on Remote Control use.

Playing a Disc

1. Make sure your unit is either plugged into the power socket or the battery is fully charged.

Switch the ON/OFF/CHARGE button to ON to turn the unit on.

2. Open and adjust the screen angle.

3. Press at the right bottom corner of the disc door to open the disc tray. Put the disc (labelled

side upwards) into the disc tray.

4. Hold the disc by its sides and carefully place onto the spindle with the label side facing up.

Gently push the disc down until you hear a “click”.

5. Close the disc door. It takes a short while for your unit to load the disc. After loading, the

unit will automatically display the main menu of the disc or start playing the disc. If the unit

does not automatically start playing the disc, press the button on the unit or the button

on the remote control or press the OK button on the unit or the remote control, depends on

the disc content.

• If the ON/OFF/CHARGE switch is in ON position, but the unit does not appear to be

on, it’s actually in STANDBY mode - you can turn it on by moving the switch to the

OFF (middle) position, then back to ON position. You can also turn the unit from

STANDBY to ON using the remote control’s STANDBY/ON button.

• When the ON/OFF/CHARGE switch is in the ON position you can use the remote

control to put the unit in STANDBY mode. The red light on the front of the unit will

illuminate when the unit is in STANDBY mode.

• Please ensure the unit is powered by the AC power adapter if you intend to use

STANDBY mode.

• Some Blu-ray discs are produced with high quality audio/video features. The time

for loading these discs may vary. Please wait patiently.

• If the disc is damaged or scratch marks/fingerprints are present on the disc, the

unit may not be able to read it and “BAD DISC” will show on the display. Remove

and clean the disc and reload the disc.

L9BDVD11_IB_final110705_running change.indd 17 05/07/2011 1:43 PM

Pausing Playback (Still Mode)

1. Press the button on the unit or the /STEP button on the remote control to pause. To

resume normal playback, press the button on the unit or the button on the remote

control.

2. Each time you press the /STEP button on the remote control, the picture advances one

frame on disc.

Stopping Playback

1. Press the button on the unit or the remote control once to stop playback. Press the

button on the unit or the button on the remote control to continue playback.

2. Depending on the disc, playback starts where it stopped or at the beginning of the disc.

3. If you press the button twice on the unit or the remote control, the unit’s memory will be

cleared and pressing the button on the unit or the button on the remote control will

reset the disc to the beginning.

Skipping to a Dierent Track

1. Press the button on the unit or the remote control to go back to previous titles/chapters/

tracks.

2. Press the button on the unit or the remote control to advance titles/chapters/tracks.

3. For an audio CD, use the number buttons on the remote control to go directly to the desired

track number.

Slow Forward

During playback, press the SLOW button repeatedly on the remote control to select different

slow playback speeds.

Zooming into an image

1. While a disc is playing, press the ZOOM button on the remote control to enlarge the image

in several levels.

2. While an image is zoomed, you can use the buttons on the remote control to shift the

view and display the part you want.

3. To return to normal view, press the ZOOM button on the remote control repeatedly until

“OFF” shows. The screen will return to normal.

4. When you reach the edge of the image, the display will not shift anymore in the direction.

Fast Forward / Fast Reverse

1. Press the buttons on the unit or the remote control when a disc is playing.

• The disc begins a fast scan at two times normal (x2) speed.

• Each time the buttons on the unit or the remote control is pressed, the speed of

the fast scan changes.

L9BDVD11_IB_final110705_running change.indd 18 05/07/2011 1:43 PM

2. Press the button on the unit or the button on the remote control when you have

reached the desired point to resume playback at normal speed.

Audio Selection

While a disc is playing, press the AUDIO button once to display the current audio setting.

Press the AUDIO button on the remote control repeatedly to select audio sound tracks

programmed on a Blu-ray Disc or DVD.

• If only one audio format is recorded, the number does not change.

• About two seconds later, playback continues in the new audio format.

• Some discs allow you to change audio using the disc menu only. If this is the case,

press the MENU button and choose the appropriate language on the disc menu.

• Some discs are set to display subtitles automatically, and you cannot turn them off

even if you set the subtitle function to off.

• During some scenes, the subtitles may not appear immediately after you select

your desired subtitle.

• The number of subtitle languages recorded differs depending on the disc. If only

one language is recorded, the language does not change.

• This function can only be used for discs on which subtitles have been recorded in

multiple languages.

• Some discs allow you to change subtitles using the disc menu only. If this is the

case, press the MENU button and choose the appropriate subtitle on the disc

menu.

Subtitle Selection

1. While a disc is playing, press the SUBTITLE button on the remote control to display the

current language setting.

2. Press the SUBTITLE button repeatedly on the remote control to select the desired subtitle

language.

Angle Selection

Some discs contain scenes which have been shot from a number of different angles. For these

discs, the same scene can be viewed from each of these different angles.

While you are playing a disc with different angles recorded, press the ANGLE button on the

remote control repeatedly to change the scene to the next recorded angle.

• After approximately two seconds, playback will continue from the new angle you selected.

• This function can only be used for discs on which scenes shot from multiple angles

have been recorded.

• If only one angle is recorded, “ ” is displayed.

• If the selected function is not supported by the disc being played, “ ” is displayed.

L9BDVD11_IB_final110705_running change.indd 19 05/07/2011 1:43 PM

Using the PiP (Picture-in-picture) mode

Some Blu-ray Discs support picture-in-picture

(PiP) mode. In PiP mode, the primary video is

displayed on the full screen, and the secondary

video is displayed in a small window.

• Press the PiP button on the remote control to

turn PiP mode on or off.

Using a Disc Pop Up Menu

• During Blu-ray or DVD playback, press the POP UP button on the remote control, the Blu-ray

popup menu or the title menu of DVD disc opens.

• Press the / buttons on the unit or press the buttons on the remote

control to select an option, then press the OK button on the unit or the remote control to

confirm.

Menu Function

• While playing the disc, press the MENU button on the remote control to go to the mains

menu if the function is available on the disc.

Primary

video

Secondary

video

L9BDVD11_IB_final110705_running change.indd 20 05/07/2011 1:44 PM

Page is loading ...

Logik L9BDVD11 User manual

Brand: Logik

Model: L9BDVD11

Category: DVD players

Type: User manual

Download PDF

report

Logik L9BDVD11 User manual

Logik L9BDVD11 User manual

Related papers

Other documents