Albatron PI965GME-M User manual

PI965GME-M

Copyright

All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed, stored

in a retrieval system or translated into any language or computer language, in any form or by any

means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior

written permission of the company. Brands and product names are trademarks or registered

trademarks of their respective companies.

The vendor makes no representations or warranties with respect to the contents herein and especially

disclaim any implied warranties of merchantability or fitness for any purpose. Further the vendor

reserves the right to revise this publication and to make changes to the contents herein without

obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not

allowed without first obtaining the vendor’s approval in writing.

Trademark

All the trademarks or brands in this document are registered by their respective owner.

Disclaimer

We make no warranty of any kind with regard to the content of this user’s manual. The content is

subject to change without notice and we will not be responsible for any mistakes found in this user’s

manual. All the brand and product names are trademarks of their respective companies.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense. However, there is no guarantee that interference will not occur in a

particular installation.

CE Mark

The device is in accordance with 89/336 ECC-ENC Directive.

Mainboard PI965GME-M

PI965GME-M

Intel

®

GME965 & ICH8M

Support Socket P

Intel

®

Core

TM

2 Duo Mobile Processors

User Manual

Dimensions (Mini-ITX form-factor):

 170 mm x 170 mm ( W x L )

Operating System:

 Windows

®

Vista/ XP/2000

V

er: EG10

0

Mainboard PI965GME-M

Things You Have To Know

0 The images and pictures in this manual are for reference only and may vary from the

product you received depending on specific hardware models, third party components

and software versions.

0 This mainboard contains very delicate IC chips. Always use a grounded wrist strap

when working with the system.

0 Do not touch any IC chip, lead, connector or other components.

0 Always unplug the AC power when you install or remove any device on the mainboard

or when confuguring pins and switches.

Packing List

 PI965GME-M Mainboard

 I/O Bracket

 Mainboard Setup Driver & User Manual CD

 Mainboard Quick Installation Guide

Symbols

Attention- Im

p

ortant Information

Follow the procedures below…

Refer to other sections in this manual…

Troubleshooting Tips

Mainboard PI965GME-M

Table of Contents

CHAPTER 1. GETTING STARTED.................................................................. 1

INTRODUCTION.......................................................................................................1

SPECIFICATION .......................................................................................................2

CONFIGURATION ....................................................................................................5

Layout of PI965GME-M (Right Side)...................................................................5

Layout of PI965GME-M (Back Side)....................................................................6

HARDWARE INSTALLATION ...................................................................................7

CPU Processor Installation ....................................................................................7

Memory Installation: DDRII 1/2............................................................................9

Back Panel Configuration....................................................................................10

Front Panel Headers: FPSW/LED, SPK1 ............................................................11

Connectors ...........................................................................................................12

Headers & Jumpers..............................................................................................13

Audio Configuration............................................................................................17

Slots......................................................................................................................17

Power Supply Attachments..................................................................................18

CHAPTER 2. BIOS SETUP............................................................................ 19

INTRODUCTION.....................................................................................................19

MAIN MENU .........................................................................................................20

CHAPTER 3: SOFTWARE SETUP ................................................................ 22

SOFTWARE LIST ...................................................................................................22

SOFTWARE INSTALLATION...................................................................................22

CHAPTER 4: TROUBLESHOOTING............................................................. 27

APPENDIX I: 2/ 4/ 6 /8 CHANNEL SETUP ...............................................................30

Mainboard PI965GME-M

1

Chapter 1. Getting Started

Introduction

Thanks for choosing PI965GME-M Mainboard. It is based on Intel

®

GME965 Northbridge

chipset and Intel

®

ICH8M Southbridge chipset. It supports Intel

®

Core

TM

2 Duo Mobile

processors with FSB (Front Side Bus) frequencies of 800 MHz/ 667 MHz/ 533 MHz.

The PI965GME-M provides two DDRII SO-DIMM sockets. These sockets allow you to

install 200-pin, non-ECC & unbuffered DDR II 667/ DDRII 533 SO-DIMMs, and they also

support a total memory capacity of 4GB.

This mainboard provides one PCI-Express interface slot up to x16 mode. In addition, one

Mini PCI slot for use with Mini PCI expansion card is also allowed.

The PI965GME-M provides one IDE connector for two IDE hard drives supporting Ultra

ATA 100/66/33. Moreover, this mainboard comes with Serial ATA II supporting with three

SATA II connectors which provide up to 3 Gbps data transfer rates.

This mainboard provides one VGA (=D-Sub) connector, one DVI connector, TV_OUT

connector, and four USB 2.0/1.1 ports on the back panel of your case for use. Besides,

there are four COM (Serial ports) headers, one GPI header, one GPO header, one Printer

Port (Parallel port) header, one SPDIF header and two USB 2.0/1.1 headers can be

connected with cables for compliant devices.. There are maximal eight USB2.0/ 1.1 ports

which can be set up on this mainboard.

The onboard High Definition Audio Codec (ALC883) supports high quality performance

8-channel audio play (See Appendix I). The mainboard also supports the Sony/Philips

Digital Interfaces (S/PDIF) output function and the front speaker output function.

The PI965GME-M also comes with two onboard 10/100/1000 Mbps Ethernet LAN chips.

There are two LAN ports on the back panel of your case that you can directly plug into

internet cables.

All the information (including hardware installation and software installation) in this

manual are for reference only. The contents in this manual may be updated without notice.

The company will not assume any responsibility for any errors or mistakes within.

Mainboard PI965GME-M

2

Specification

CPU:

 Support Socket P

 Support Intel

®

Core

TM

2 Duo Mobile processors

 Support Hyper-Threading Technology

 Support 800 MHz/ 667 MHz/ 533 MHz FSB (Front Side Bus) frequencies

Chipset:

 Northbridge Chipset – Intel

®

GME965

 Southbridge Chipset – Intel

®

ICH8M

 I/O Controller – Winbond

®

W83627UHG

 HD Audio Codec – Realtek

®

ALC883

 Dual Gbit LAN Controllers – Marvell

®

88E8056

 DVI Controller – Silicon

®

Image Sil1362

Memory:

 Two DDRII SO-DIMM sockets

 Supports 200-pin, unbuffered & non-ECC DDRII 667/ DDRII 533 SO-DIMMs

 Supports a total memory capacity of 4 GB

Onboard HD Audio Codec (ALC 883):

 High performance Codec with high S/N ratio (>90 db)

 Compliant with Azalia 1.0 specification

 Supports 8/6/4/2 channel playback capability

 Supports jack sensing and re-tasking function

 Built-in Dolby Digital Live Technology

 Supports Sony/ Philips Digital Interfaces (S/PDIF) output functionality

Slots:

 One PCI-Express x16 interface slot for expansion card

Mainboard PI965GME-M

3

 One Mini PCI slot for Mini PCI expansion card

IDE Connectors:

 One IDE connector for two IDE devices

 Supports Ultra ATA 33/66/100

 Supports high capacity hard disk drives

Serial ATA Connectors:

 Three SATA connectors

 Supports SATA 2.0 specification and with 3 Gbps data transfer rates

 One SATA connector can only support one SATA HDD

Onboard LAN Chip:

 10/100/1000 Mbps Ethernet LAN supported

I/O facility Connectors

 Supports one PS/2 mouse port and one PS/2 keyboard port

 Supports TV_OUT connector

 Supports one VGA port (=D-Sub)

 Supports one DVI port

 Supports one RCA S/PDIF OUT port

 Supports one LVDS connector, one S/PDIF header, four COM (Serial Port) headers,

one GPI header and one GPO header to connect compliant devices for use

Universal Serial Bus:

 Four onboard USB 2.0/ 1.1 ports

 Two front USB header comes with this mainboard for additional four USB ports

 Support a maximum of eight USB ports to connect USB compliant devices

BIOS:

 Phoenix-Award™ BIOS

 Support APM1.2

Mainboard PI965GME-M

4

 Support ACPI 2.0 power management

Green Function:

 Supports Phoenix-Award™ BIOS power management function

 Supports system-wake-from-power-saving-mode by keyboard or mouse touching

Shadow RAM:

 Integrated memory controller provides shadow RAM functionality and supports

ROM BIOS

Flash Memory:

 Supports flash memory functionality

 Supports ESCD functionality

Hardware Monitor Function:

 Monitors CPU/ Chassis Fan Speed

 Monitors CPU and system temperature

 Monitors system voltages

Mainboard PI965GME-M

5

Configuration

Layout of PI965GME-M (Right Side)

Mainboard PI965GME-M

6

Layout of PI965GME-M (Back Side)

Mainboard PI965GME-M

7

Hardware Installation

This section will assist you in quickly installing your system hardware. Wear a wrist ground strap

before handling components. Electrostatic discharge may damage the system’s components.

CPU Processor Installation

This mainboard supports Intel

®

Core

TM

2 Duo Mobile processors using a Socket P. Before building

your system, we suggest you to visit the Intel website and review the processor installation

procedures. http://www.intel.com

CPU Socket P Configuration Steps:

1. Use a screwdriver to turn the screw counter-clockwise until the dot on the screw points to the

“unlocked” sign. (3 o’clock position)

2. On the socket, locate the pin-1 receptor. Match the Pin-1 marker on the CPU with the pin-1

receptor of the socket and then gently lower the CPU onto the socket. Do not use force as it will

result in bent pins.

3. Next, turn the screw clockwise until it points to the “locked” sign (9 o’clock position) — this will

lock the CPU into the socket.

Pin-1

Marker

Pin-1

Receptor

Mainboard PI965GME-M

8

4. Smear thermal grease on the top of the CPU. Lower the CPU fan onto the CPU/ socket and secure

it using the attachments or screws provided on the fan. Finally, attach the fan power cord to the

CPUFAN header.

FAN Headers: CPUFAN, AUXFAN

There are two fan headers available for cooling fans. These cooling fans play an important role in

maintaining ambient temperatures in your system. The CPUFAN header is attached with a CPU

cooling fan. The AUXFAN header is attached with another cooling fan.

Pin Assignment

1 Ground

2 Power (+12V)

3 FAN RPM rate sense

1

CPUFAN

4

Smart Fan Control

Pin Assignment

1 Ground

2 Power (+12V)

1

AUXFAN

3

FAN RPM rate sense

Attention

DO NOT touch the CPU pins in case they are damaged. Also, make sure

that you have completed all installation steps before powered on the

system. Finally, double-check that the cooling fan is properly installed and

the CPU fan power cord is securely attached, in case

your CPU and other

sensitive components are damaged because of high temperatures.

Attention

You can avoid damaging your CPU due to high temperatures with

proper cooling equipment. It is recommended that attach

a cooling fan

on top of your CPU. Use the CPUFAN header to attach the fan cord.

On most fan power cord, the black wire of the fan cable is the “Ground”

and should be attached to pin-1 of the header.

Mainboard PI965GME-M

9

Memory Installation: DDRII 1/2

The PI965GME-M provides two DDRII SO-DIMM sockets with Dual Channel Technology supported.

This sockets allow you to install 200-pin, non-ECC & unbuffered DDR II 667/ 533/ 400 SO-DIMM,

supporting to install a total memory capacity of 4 GB.

Memory Installation Steps:

1. Pull the white plastic tabs at both ends of the slot away from the slot.

2. Match the notch on the RAM module with the corresponding pattern in the DIMM slot. This will

ensure that the module will be inserted with the proper orientation.

3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the module

snaps into place.

4. Repeat steps 1, 2 & 3 for the remaining RAM modules.

＊ The pictures above are for reference only. Your actual installation may

vary slightly from the pictures.

Mainboard PI965GME-M

10

Back Panel Configuration

PS/2 Mouse & PS/2 Keyboard Ports: KB/MS

This mainboard provides a standard PS/2 mouse port and a PS/2 keyboard port.

DVI Connectors: DVI

DVI connector delivers the digital signals, and is able to connect with LCD display, plasma display, or

other display device which with the DVI interface compatible.

The VGA (D-SUB) Connector: VGA

The mainboard provides one VGA connector (= D-Sub connector) on back panel.

VGA connector (= D-Sub connector) delivers the analogy signals, and is able to connect with

traditional CRT display, flat display, or other display device which with the D-Sub interface

compatible.

TV OUT Connector: TV_OUT

The TV_OUT connector is used to connect to high quality video equipment and TVs that support the

YPbPr standard. The three cables used in YPbPr connection provide higher quality than single-wire

composite cable commonly used to hook up video equipment. TV_OUT is converted from the RGB

video signal, which is split into three components, Y, Pb and Pr.

 Y carries luminance information.

 Pb carries the difference between blue and luminance (B - Y).

 Pr carries the difference between red and luminance (R - Y).

S/PDIF OUT Connector: SPDIF OUT

Mainboard PI965GME-M

11

S/PDIF is a recent audio transfer file format, which provides high quality audio using optical fiber and

digital signals. There are one RCA SPDIF OUT connector on the back panel of your case, enabling you

to transmit audio output between your system and the SPDIF devices.

USB Ports/LAN Ports: USBLAN1, USBLAN2

There are four onboard USB 2.0/ 1.1 ports on the back panel. These USB ports are used to attach with

USB devices, such as keyboard, mice and other USB supported devices. There are also two

10/100/1000 Mbps Ethernet LAN port available for you to attach internet cables.

Front Panel Headers: FPSW/LED, SPK1

FPSW/LED

Pin Assignment Function Pin Assignment Function

1

HDD LED (+)

2

Power LED (+)

3

HDD LED (-)

Hard Drive LED

(HD_LED)

4

Power LED (-)

Power LED

(ACPI_LED)

5

Reset Control (-)

6

Power Switch (+)

7

Reset Control (+)

Reset Switch

(RST_SW)

8

Power Switch (-)

Power-on Switch

(PWR_SW)

9

N/C

10

N/C

Power-on Switch Header: PWR_SW

This header can be attached to a power switch cable on your case front panel. You can turn your

system on or off by pressing the button attached to this power switch cable.

Hard Drive LED Header: HD_LED

If your case front panel has a hard drive LED cable, attach it to this header. The LED will flicker when

there is hard disk drive activity.

Power LED Header: ACPI_LED

These mainboards provide a 2-pin power LED header. If there is a 2-pin power LED cord on your case

front panel, you can attach it to the 2-pin power LED header. Then the power LED will illuminate while

the system is powered on.

Mainboard PI965GME-M

12

Reset Switch Header: RST_SW

This header can be attached to a momentary SPST switch (reset button) cable on your case front

panel. The switch is normally left open. When the switch closed, it will cause the mainboard to reset

and run the POST (Power-On Self Test).

Speaker Header: SPK1

A speaker cable on your case front panel can be attached to this header. When you reboot the

computer, this speaker will issue a short audible (beep). If there are problems during the Power On

Self-Test, the system will issue an irregular pattern of audible beeps through this speaker.

Connectors

Hard Disk Drive Connector: IDE1

The mainboard provides one IDE connector that supports Ultra ATA 133/ 100/ 66/ 33 IDE devices. You

can attach a maximum of two IDE devices, such as hard disk drive (HDD), CD-ROM, DVD-ROM, etc.

using IDE ribbon cables.

In general, two IDE devices can be attached onto one IDE connector. If you attach two IDE HDDs, you

must configure one drive as the master and the other one as the slave.

Serial ATA Connector: SATA 1/2/3

The three SATA connectors support 3 Gbps data transfer rates, and one SATA connector only can

attach one SATA HDD of each time using SATA cables.

LVDS Connector: LVDS

This mainboard supports one 24-bit LVDS (Low Voltage Differential Signaling) connector. You can

attach one flat panel display or other compatible display device.

Pin Assignment Pin Assignment

1 PC_BEEP 2 N/A

SPK1

3 Ground 4 +5V

Mainboard PI965GME-M

13

Headers & Jumpers

Front USB Headers: USB1/USB2

This mainboard provides four onboard USB 1.1/2.0 ports on the back panel of your case that attach to

USB devices. There are two additional USB headers that can be connected by cables to four more

USB ports on your case front panel giving you eight USB ports possible.

LVDS

Assignment Pin Assignment

12/5V

2 1

12/5V

GND

4 3

GND

3.3V

6 5

3.3V

GND

8 7

GND

BCKLITE_ON

10 9

BRIGHTNESS

LVDS_GND

12 11

LVDS_GND

CHB_TX0+

14 13

CHA_TX0+

CHB_TX0-

16 15

CHA_TX0-

LVDS_GND

18 17

LVDS_GND

CHB_TX1+

20 19

CHA_TX1+

CHB_TX1-

22 21

CHA_TX1-

LVDS_GND

24 23

LVDS_GND

CHB_TX2+

26 25

CHA_TX2+

CHB_TX2-

28 27

CHA_TX2-

LVDS_GND

30 29

LVDS_GND

CHB_TXC+

32 31

CHA_TXC+

CHB_TXC-

34 33

CHA_TXC-

LVDS_GND

36 35

LVDS_GND

CHB_TX3+

38 37

CHA_TX3+

CHB_TX3-

40 39

CHA_TX3-

Mainboard PI965GME-M

14

Serial Port Header: COM1/2/3/4

This mainboard provides four COM headers for you to connect additional serial connectors on your

case back panel. Attach the cable of serial connector (Optional) onto these headers, and then you can

use the serial connectors connecting with a mic, modem or other peripheral device.

Pin Assignment Pin Assignment

1 Data Carry Detect 2 SerialIn or Receive Data

3 SerialOut or Transmit Data 4 Data Terminal Ready

5

Ground

6 Data Set Ready

7 Request To Send 8 Clear To Send

COM1/2/3/4

9 NC 10

N/C

Printer Interface Header: PRT PORT

This mainboard provides a PRT header for you connecting an additional printer connector on your

case back panel. Attach the cable of printer connector (Optional) onto this header, and then you can

use the printer connector connecting with a printer.

Pin Assignment Pin Assignment

1 +5V 2 +5V

3 USB- 4 USB-

5 USB+ 6 USB+

7 Ground 8 Ground

USB1/2

9 Key 10 N/C

A

ttent

i

on

If you are using a USB 2.0 device with Windows 2000/XP, you will

need to install the USB 2.0 driver from the Microsoft

®

website. I

f

you

are using Service pack 1 (or later) for Windows

®

XP, and using

Service pack4 (or later) for Windows® 2000, you will not

have to

install the driver.

Mainboard PI965GME-M

15

Pin Assignment Pin Assignment

1 RSTB- 2 RAFD-

3 RPDR0 4 ERR-

5 RPDR1 6 RIVIT-P-

7 RPDR2 8 KSLIN-

9 RPDR3 10 GND

11 RPDR4 12 GND

13 RPDR5 14 GND

15 RPDR6 16 GND

17 RPDR7 18 GND

19 ACK- 20 GND

21 BUSY 22 GND

23 PE 24 GND

PRT PORT

25 SLCT 26 GND

Power for LVDS Connector Header: JP4, JP5

When you connect one LVDS flat panel or other compatible devices, you must adjust the jumper caps

on the JP4 and JP5 headers to enable this functionality. Please refer to the table below.

JP4 Assignment

Pin 1-2 Closed

LVDS Power +5V

Pin 2-3 Closed

LVDS Power +3.3V(Default)

JP5 Assignment

Pin 1-2 Closed

LVDS Power +12V (Default)

Pin 2-3 Closed

LVDS Power +5V

Note: “Closed” means putting a jumper cap onto two adjacent header pins.

USB Power On function Header: JP3

USB devices attached to the back panel USB ports can awaken the system from sleep mode. In order

to enable this functionality, you must adjust the jumper cap on JP3 header for +5V or +5VSB mode

depending on which USB port that the USB device is attached to.

Mainboard PI965GME-M

16

JP3 Assignment Assignment

1

Pin 1-2 Closed

+5V

USB Power On Disable (Default)

1

Pin 2-3 Closed

+5VSB

USB Power On Enabled

Note: “Closed” means putting a jumper cap onto two adjacent header pins.

Clear CMOS Jumper: JP2

The “Clear CMOS” function is used when you are unable boot your system and need to reset the BIOS

settings (CMOS settings) back to the manufacturer’s original settings. This is also a way to reset the

system password if you have forgotten it.

JP2 Assignment

Pin 1-2 Closed

Normal (Default)

Pin 2-3 Closed

Clear CMOS Data

Note: “Closed” means putting a jumper cap onto two adjacent header pins.

1. Turn off your system and disconnect the AC power cable.

2. Set JP2 header to OFF (2-3 Closed).

3. Wait several seconds.

4. Set JP2 header to ON (1-2 closed).

5. Connect the AC power cable and turn on your system.

6. Reset your new password.

The following steps explain how to reset your CMOS

configurations when you forgot a system password.

Page is loading ...

Albatron PI965GME-M User manual

Albatron PI965GME-M User manual

Related papers

Other documents