D-Link DSP-W118 User manual

2 3

1

4

Plug the Mini Wi-Fi Smart Plug into a power

outlet. Wait until the LED on the front changes

from red to flashing amber.

When asked to scan a Setup Code, it will be located

on the right side of your Mini Wi-Fi Smart Plug.

Note: Please ensure that your mobile device is connected

to the same Wi-Fi network of the router that you plan on

connecting the smart plug to.

Existing Users:

Sign in using your mydlink account and tap the icon at the top-

left, then tap Add a Device to start the setup wizard. Continue

to follow the onscreen instructions.

OR

New Users:

Tap Sign Up to register for a mydlink account, then tap Add a

Device to install your Wi-Fi Smart Plug. Continue to follow the

onscreen instructions.

Scan the QR code above to download the mydlink app or search for

"mydlink" on the App Store or Google Play

TM

.

Note: This product is NOT COMPATIBLE with the other mydlink

apps. Please install the app titled only "mydlink."

If you are a mydlink Lite user, sign in to the new app with the same

username and password and your existing cameras will appear in the

new app.

Mini Wi-Fi Smart Plug

Quick Installation Guide

DSP-W118

Version 1.00 (CA_EN)_70X110

March 12, 2019

Frequently Asked Questions

1) What can I do if my smart plug is not

working properly?

First, reset the smart plug and try setting the smart

plug up again. To reset your smart plug, press and hold

the Power button until the LED turns to solid red.

To make sure your hardware is installed correctly, make

sure that:

• you have an Internet connection on your router

• your router’s Wi-Fi is turned on

• your smart plug is on the same Wi-Fi network as

your mobile device during setup

Frequently Asked Questions

2) How can I use voice commands to control my

smart plug?

The smart plug will work with both Amazon Alexa and the

Google Assistant.

For step by step instructions on how to pair your smart

plug with either of these services, visit:

support.dlink.ca/DSP-W118

?

of D-Link Corporation or its subsidiaries. Product specification, size and shape

are subject to change without notice, and actual product appearance may

differ from that depicted on the package. Visit dlink.ca for more details.

Device Information

Booting up.

Successfully connected to Wi-Fi and switched on.

Ready for setup.

Lost the Wi-Fi connection.

Firmware is currently being upgraded.

Power/Reset Button

Status LED

Switched oﬀ.

?

Support

For additional support resources, frequently asked questions and

warranty information, visit:

support.dlink.com (USA) or support.dlink.ca (CAN)

Mini Wi-Fi Smart Plug

User Manual

2019/04/30

Hardware: A1

Manual Version: 1.00

D-Link DSP-W118 User

Manual

i

Manual Overview

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to

notify any person or organization of such revisions or changes. Information in this document may become obsolete as

our services and websites develop and change. Please refer to the www.mydlink.com website for the most current

information.

Manual

Revisions

Revision

Date

Description

1.00

2019/04/30

A1 release with firmware version 1.00

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other

countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.

Apple®, Apple logo®, iPhone®, and iPad® are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service

mark of Apple

Inc.

Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.

D-Link DSP-W118 User

Manual

i

Corporation, Inc.

D-Link DSP-W118 User

Manual

ii

Table of

Contents

Table of Contents

Product Overview .............................................................. 1

Package Contents......................................................................... 1

Introduction ................................................................................... 2

System Requirements ................................................................. 2

Hardware Overview ..................................................................... 3

Safety ................................................................................................ 4

Before you Begin........................................................................... 4

Wireless Installation Considerations...................................... 5

Getting Started .................................................................. 6

Hardware Installation.................................................................. 6

Setting up the Smartplug Through mydlink App ............. 7

Using the mydlink App...................................................... 9

Controlling Your Device ............................................................. 9

Device .....................................................................................10

Firmware Upgrade..............................................................11

Troubleshooting .............................................................. 12

Technical

Specifications ..................................................

13

Regulatory Information .................................................. 15

Section 1 - Product

Overview

D-Link DSP-W118 User

Manual

1

Product Overview

Package

Contents

DSP-W118 Mini Wi-Fi Smart Plug

Quick Installation Guide

If any of the above items are missing, please contact your reseller.

Section 1 - Product

Overview

D-Link DSP-W118 User

Manual

2

Introduction

The D-Link DSP-W118 Mini Wi-Fi Smart Plug is a multi-purpose, compact, and easy-to-use device that allows you to control your

home’s electric appliances from wherever you are. Scheduling provides a helpful way to save power while you’re at work or asleep, and

the mydlink™ app provides an easy way to set up alerts, or power an appliance on or off.

System Requirements

Network Requirements

• 802.11n/g wireless network

• An Internet connection

• A router connected to your

broadband modem

mydlink™ App Requirements

• iPhone, iPad, Android smartphone or

tablet (please refer to the mobile app's

store page to check whether your

device is compatible)

• Email account (for mydlink™

service registration)

Section 1 - Product

Overview

D-Link DSP-W118 User

Manual

3

Hardware Overview

Front View

2

3

1

Power Socket

Connect your appliances, lamps, and other electronic devices you wish to control here.

2

Status LED

Solid Red

Booting up after being plugged in or factory reset.

Blinking Red

Can't connect to Wi-Fi.

Blinking Amber

Ready for setup.

Solid Green

Successfully connected to the internet, bound to a mydlink account, and socket

switched on.

Blinking Green &

Red

Firmware is currently being upgraded.

Off

Switched off. No power is supplied from the socket it's plugged into or it is unplugged.

3

Power /

Reset Button

Press this button to turn on/off the power socket. Press and hold for 5 seconds until the Status LED turns

solid red to factory reset it.

Section 1 - Product

Overview

D-Link DSP-W118 User

Manual

4

Safety

Please read all of the safety and operating instructions before using your device:

1. Do not open the device or attempt to repair or service it.

2. Use the device in a dry location, and avoid placing it in a humid environment.

3. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device,

disconnect from the power outlet and use a damp towel.

4. This device should only be used indoors.

Plan the location of your

devices:

Before You Begin

1. Verify that your devices are electrically rated to operate with the power available in your location.

2. Connect devices into electrical outlets that are not controlled by a wall switch. This will help you to avoid accidentally

turning

off power to the device.

3. Be sure to plug the power cables into properly grounded electrical outlets in order to help prevent against electrical

shock.

Section 1 - Product

Overview

D-Link DSP-W118 User

Manual

5

Wireless Installation

Considerations

The DSP-W118 connects to your network using a wireless connection from virtually anywhere within the operating

range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects

that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of

materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range

is to follow these basic guidelines:

1. Keep the number of walls and ceilings between the product and other network devices to a minimum -

each wall or ceiling can reduce your device's range from 1 to 30 meters (3 to 90 feet). Position your

devices so that the number of walls or ceilings is minimized.

2. Be aware of the direct line between network devices. A wall that is 0.5 meters (1.5 feet) thick, at a 45-

degree angle appears to be almost 1 meter (3 feet) thick. At a 2-degree angle it looks over 14 meters

(42 feet) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of

at an angle) for better reception.

3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on

range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or

open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors,

file cabinets, brick, and concrete will degrade your wireless signal.

4. Keep your product away at least 1 to 2 meters (3 to 6 feet) from electrical devices or appliances that generate

RF

noise.

5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and

home security systems), your wireless connection may degrade dramatically or drop completely. Make

sure your 2.4

GHz phone base is as far away from your wireless devices as possible. The base transmits a signal

even if the phone is not in use.

D-Link DSP-W118 User

Manual

6

Section 2 -

Installation

Getting Started

Hardware Installation

To install your device, first plug it into an unoccupied wall outlet.

The LED in the front will light up red briefly while booting up, then start blinking amber when it's ready for setup.

D-Link DSP-W118 User

Manual

7

Section 2 -

Installation

Setting up the Device Through the mydlink App

Please follow the instructions below to setup your device

Note: Ensure your mobile device is connected to the Wi-Fi network that the device will be in.

Step 1:

Download the mydlink app from the App Store (iPhone or iPad) or

Google Play (Android).

Step 2:

Once the mydlink app is installed, launch the app.

iOS: If you are asked about allowing the app to access your location, select

Allow. Android: Make sure location services are turned on in your phone’s

settings.

D-Link DSP-W118 User

Manual

8

Section 2 -

Installation

Step 3:

After logging in or signing up, for a new account, tap the Menu icon in

the top-left corner, select Add a Device, and proceed to follow the on-

screen

instructions to set up your device

When asked to scan a Setup Code, it will be located on the right side of

your device.

Step 4:

Congratulations, your device is now ready to use!

Be sure to check the www.mydlink.com website periodically to stay up to

date with the latest features.

D-Link DSP-W118 User

Manual

9

Section 3 -

mydlink

Using the mydlink App

Controlling Your Device

After setting up your device with a mydlink account in the mydlink™ app,

you will be able to remotely control your device through the app. After

signing in to your mydlink™ account, you will see a screen similar to the

following.

If you have previously enabled "Add to shortcut" option while installing the

device, you will see a quick link to your device directly on the home screen.

You can also tap the power button icon here to quickly toggle the device

on or off.

Note: Screenshots are representative only. The mydlink™ app is constantly improving

and so may appear different.

Clinking on the shortcut link will turn the plug on and off.

Or, you can access your device by tapping the Menu icon in the top-left

corner, select Devices, and select Plug. In the selected device group

page, you can select the specific device in the carousel by tapping its icon.

D-Link DSP-W118 User

Manual

10

Section 3 -

mydlink

1

Device Photo

Tap to add a customized photo of this

device.

2

Device Name

Tap to change the device’s name.

3

Device Location

Tap to change or add a new location for

this device.

4

Wi-Fi

Tap to change the wireless network this

device will use to connect to the Internet.

Note: The network must be the same as all

your other mydlink™ devices that you wish

to use the same account for.

5

Upgrade Time

Tap to enter the firmware upgrade settings.

You can choose the most suitable time for

automatic updates.

Note: It’s recommended you enable Auto-

Upgrade to make sure you have the most

up- to-date security updates Over The Air.

6

Current Firmware

Version

This displays the installed version of

the firmware on your device.

7

Device ID

Identifies the device for support issues.

8

Remove Device

Tap this button to disconnect this device

from your mydlink™ account.

Device

The Device page contains several options for you to configure your device.

In the device control page, after you have selected the specific device you wish to configure, tap the button to

the right of the sdevice’s name to enter the Device page.

1

2

3

4

5

6

7

8

D-Link DSP-W118 User

Manual

11

Section 3 -

mydlink

1

Auto-Upgrade

Tap to enable/disable automatic Over-The-

Air firmware updates.

2

Upgrade Reminder

Tap to change the notification time

whenever there is a new update.

3

Upgrade Time

Tap to change the time for automatic

firmware updates to be downloaded and

installed.

Firmware Upgrade

You can update the firmware for a specific device in this section.

1

2

3

D-Link DSP-W118 User

Manual

12

Section 4 -

Troubleshooting

1. How can I access my device remotely through the Internet?

In order to use your device remotely through the Internet using the mydlink app, you must register your device

with a mydlink account. You can do this using the free mydlink app. Please go to Using the mydlink™ App on page

9

for more information.

2. How do I update the firmware of my device?

You can update your device’s firmware by using the mydlink app. For more information, please see page 11.

3. What do I need to do before I upgrade from the mydlink Lite app to the mydlink app?

Please refer to the app's store page for device compatibility requirements.

Note: You can use the same mydlink account to log into the mydlink app.

4. Do I have to sign up for a new mydlink account when transferring to the mydlink app?

No, you don’t need to sign up for a new mydlink account. You just have to sign in the mydlink app using your

existing mydlink account and all your existing devices will show up in the mydlink app.

D-Link DSP-W118 User

Manual

13

Appendix A - Technical

Specifications

Technical Specifications

General

Standards

•

IEEE

802.11n/g

Security

• WPA/WPA2

LED

• Status

Antennas

•

One internal

antenna

Buttons

•

Power

/

reset

button

Functionality

Support

Functions

•

Smart remote

control •

Count down

timer

• Automation •

Works with Amazon Alexa, the Google Assistant and

IFTTT

•

Power

scheduling

Advanced

Features

•

mydlink™ app for iPhone®, iPad®, and Android™

devices

App

Compatibility

•

Please refer

to

the mobile app’s store page

to

check your device’s

compatibility

Physical

Dimensions (W

x H x D)

•

2.68

x

1.50

x

1.38

/

2.12

in

[including

prongs]

Weight

•

2.93

oz

Power

Input

•

120

V

Input

Frequency

•

60

Hz

Power

Consumption

• <

3

W

Maximum

Load

•

1800

W

Temperature

•

Operating: 32

to

104

°F •

Storage:

-4 to

149

°F

Humidity

•

Operating: 10%

to

90%

non-condensing •

Storage: 5%

to

95%

non-condensing

Certifications

• FCC • cUL

• IC •

RoHS

Compliance

Order Information

D-Link DSP-W118 User

Manual

14

Appendix A - Technical

Specifications

Part

Number

Description

DSP-W118

Mini Wi-Fi Smart

Plug

Page is loading ...

D-Link DSP-W118 User manual

D-Link DSP-W118 User manual

Related papers

Other documents