Page is loading ...
Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran System
Executive Oce Desk
Size: 1400 x 700 mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Leg x4
Adjustable Foot x4
Leg Cable Cover x4
Rail Lengths x2 (890mm)
Rail Widths x2 (120mm)
2 Way Connector x4
2 Way Connector Cap x4
Table Top x1 (1400mm x 700mm)
Rail Space Bracket x2
Slot nutx2
1
2
3
4
5
6
7
8
9
10
M8x20mm Dome Head x8
M8x20mm Cap Head x4
M5x20mm Self Tapping x8
M8x12mm Dome Head x2
11
12
13
14
COMPONENTS
SCREWS
Page 2 of 4
INSTALLATION GUIDE
San Fran System
Executive Oce Desk
Size: 1400 x 700 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
8
4
3
1
9
2
6
7
5
11
12
10
01
04
Slide the 2 way connectors over each leg, and securely lock into place using
M8x20mm cap head bolts.
Ensure the worksurface is centered over the frame. Fully tighten all M5x20mm self
tapping screws through each leg and rail space bracket into the worksurface.
Page 3 of 4
INSTALLATION GUIDE
San Fran System
Executive Oce Desk
Size: 1400 x 700 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Loosely connect the longer M8x20mm dome head bolt and slot nut through the
rail spacer bracket. Slide onto required rails and fully tighten in place.
03
Securely connect legs to rails lenghts using the shorter
M8x20mm dome head bolts.
02
Conceal any power cable using the magnetic leg cable covers.
Page 4 of 4
05
INSTALLATION GUIDE
San Fran System
Executive Oce Desk
Size: 1400 x 700 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
/
