Heiman HS1SA-Z User manual

Brand: Heiman

Model: HS1SA-Z

Type: User manual

Heiman HS1SA-Z is a security-enabled Z-Wave Plus product that can use encrypted Z-Wave Plus messages to communicate with other security-enabled Z-Wave Plus products. It is a sensor-notification type device with a role type of RSS (Reporting Sleeping Slave) and supports various command classes, including Notification, Association, Association Group Info, Version, Manufacturer Specific, Device Reset Locally, Powerlevel, Battery, Wake Up, and Multi Channel Association.

Key features and possible use cases:

Smoke and no smoke detection: The device can detect the status change of smoke and no smoke and report alarm information accordingly. When smoke is detected, the red LED blinks quickly, and the device sends out a smoke event. When the smoke clears, the red LED turns off, and the device sends out a smoke-free event.

Key features and possible use cases:

Smoke and no smoke detection: The device can detect the status change of smoke and no smoke and report alarm information accordingly. When smoke is detected, the red LED blinks quickly, and the device sends out a smoke event. When the smoke clears, the red LED turns off, and the device sends out a smoke-free event.



HS1SA‐Z

Z‐WaveDevice

GuideDocument

 

Productdescripion

‐ProductisS2Unauthenticateddevices.

‐ThisdeviceisasecurityenableZ-WavePlusproductthatisabletouseencryptedZ-WavePlus

messagestocommunicatetoothersecurityenableZ-WavePlusproducts.

Note:A"SecurityEnableZ-WaveController"mustbuusedinordertofullyutilizethisfunction.



1‐DeviceADDforInclusion

‐  Click[Add]iconinZ‐WaveController.

‐  PresstheNet_Button3timeswithin1.5s,GreenLEDisBlinking3timeswithin1second.

‐  IfInclusionProcessissuccessful,Greenledwillturnoff.



2‐DeviceRemoveforExclusion

‐  Click[Remove]iconinZ‐WaveController

‐  PresstheNet_Button3timeswithin1.5s

‐  IfExclusionProcessissuccessful,GreenledisBlinking6times,thenturnoff.

3‐Devicetestmode

ifInclusionprocessissuccessful,PressTest_Buttontotestifthedeviceisworkingnormally.

RedLEDflashesthedevice3timesandsendsoutasmokeevent,thenwhentheredLEDturn

offthedevicesendsoutasmoke‐freeevent.



4‐Devicedetectionmode

ifInclusionprocessissuccessful,thedevicewillreportalarminformationifdetectthestatus

changeofsmokeandnosmoke.RedLEDblinksquicklywhensmokeisdetected.



5‐DeviceFactoryReset

‐‐LongpressNet_Buttonatleast10secondsintheproduct.

‐DeviceResetLocallynotificationisTransmitted.

.Pleaseusethisprocedureonlywhenthenetworkprimarycontrollerismissingorotherwise

Test_Button/LED

Indicator

Net_Button



inoperable.

6‐Association&AssociationGroupInformation

‐  LifelinebetweencontrollerandHS1SA‐Z

‐Supportedcommandclasses

Batteryreport,Notificationreport,andDeviceResetLocallynotification.

‐AssociationGroupdescription

Associationgroup1:Lifelineassociationgroup

‐Maximumsupportednodeis5.

Includecommandclasses:Batteryreport,Notificationreport,andDeviceResetLocally

notification,

▶Associationgroup2:RootDevicegroup(Basicset)

‐Maximumsupportednodeis5.

TheSensorsendsaBasicSetcommandtodirectlytriggerdevices(likealight,switch,etc.)in

responsetoevents.ThevalueoftheBasicSetcommand(e.g.Sirentrigger)isconfiguredusing

smokeornosmoke

ThisparametersetsthevaluesentbytheBASIC_SETcommandtoAssociationGroupforSmoke

event

BASIC_SETLevel0xFFTurnOnDevice

ThisparametersetsthevaluesentbytheBASIC_SETcommandtoAssociationGroupforno

smokeevent

BASIC_SETLevel0x00  TurnOffDevice



7‐NotificationReport

‐Pressorreleasetestbutton,orsmokestatusischanged(smokedetectedornosmoke

detected),NotificationReportistransmitted



8‐BatteryReport

‐  BatteryReportistransmittedwhenpoweronthedevice.

‐  BatteryReportistransmittedonceaday.

‐  BatteryReportistransmittedwhenthebatteryfallslessthan0%

‐

BatteryVoltageBatteryLevel

2.4V~3.0V0~100(%)

Under2.4V 0xFF



NotificationType



Event



SmokeAlarm

(0x01)

PreviousEventscleared

(0x00)

Smokedetected,

UnknownLocation(0x02)



9‐WakeupNotification

‐  WakeupNotificationistransmittedevery24hoursbydefault.

‐  WakeupNotificationistransmittedwhenpoweristurnon.

10‐Devicesfrommultiplemanufacturersinonenetwork

‐  ThisproductcanbeincludedandoperatedinanyZ‐Wavenetworkwith

otherZ‐Wavecertifieddevicesfromothermanufacturersand/orother

applicants.Allnon‐batteryoperatednodeswithinthenetworkwillactas

repeatersregardlessofvendortoincreasereliabilityofthenetwork.



11‐Z‐WaveSpecifications

11.1‐DeviceType:Sensor‐Notification

11.2‐RoleType:RSS(ReportingSleepingSlave)

11.3‐CommandClassSupport/Control

11.3.1‐Z‐WaveplusInfoVersion2

11.3.2‐NotificationVersion8

11.3.3‐AssociationVersion2

11.3.4‐AssociationGroupInfoVersion1

11.3.5‐TransportServiceVersion2

11.3.6‐VersionVersion3

11.3.7‐ManufacturerSpecificVersion2

11.3.8‐DeviceResetLocallyVersion1

11.3.9‐PowerlevelVersion1

11.3.10‐BatteryVersion1

11.3.11‐Security2Version1

11.3.12‐SupervisionVersion1

11.3.13‐Wake Up Version 2

11.3.14‐MultiChannelAssociationVersion3

11.4-The below listed CommandClassareallSupportedtheSecurityS2

11.4.1‐NotificationVersion8

11.4.2‐AssociationVersion2

11.4.3‐AssociationGroupInfoVersion1

11.4.4‐VersionVersion3

11.4.5‐ManufacturerSpecificVersion2

11.4.6‐DeviceResetLocallyVersion1

11.4.7‐PowerlevelVersion1

11.4.8‐BatteryVersion1

11.4.9‐Wake Up Version 2

11.4.10‐MultiChannelAssociationVersion3

12‐IndicateLEDstatuesdescription‐

statusLEDstatusAlarmsound

Normal RedLEDflashevery53s Nosound

TestmodeRedLEDflashquicklySound“Di‐Di‐Di”loudly

AlarmRedLEDflashquicklySound“Di‐Di‐Di”loudly



SilencemodeRedLEDflash1timeevery10

seconds

Nosound

LowbatteryRedLEDflash1timeevery53

seconds

Sound“Di”every53seconds

Fault RedLEDflash2timesevery

53seconds

Sound“Di”twiceevery53

seconds

13‐Howtoreplacethebatteries



Turnrighttodismantlethemountingbaseof

thedevice



1)takeoutbatteryfromthedevice

2)Insertthebatteryintothedevice

(Youmustbecarefulofthebattery

polarity)



Turnlefttoinstallthemountingbaseofthe

device

(beforeinstallthemountingbase,youshould

mustinsertbatteryfirstly,otherwisethe

mountingbasewillnotbefixed)



14‐TechnicalSpecifications



ModelNo.HS1SA‐Z

RFfrequency868.40‐869.85MHz

RFoperatingdistanceUpto100moutdoorlineofsight

Upto40mindoor

Poweredby1xCR123A

Temperature‐10℃~50℃

Humidity95%max

Weight69.2g(batteries)



Heiman HS1SA-Z User manual

Brand: Heiman

Model: HS1SA-Z

Type: User manual

Key features and possible use cases:

Smoke and no smoke detection: The device can detect the status change of smoke and no smoke and report alarm information accordingly. When smoke is detected, the red LED blinks quickly, and the device sends out a smoke event. When the smoke clears, the red LED turns off, and the device sends out a smoke-free event.

Download PDF

report

Heiman HS1SA-Z User manual

Heiman HS1SA-Z User manual

Related papers

Other documents