NEC T30A User manual

T30A / T60A Tape Library

NF6303 / NF6306

User’s Guide

Rev.1

＜T30A＞＜T60A＞

-This User's Guide provides information to use the unit safely and correctly and to avoid a

personal injury and/or a damage to the customer's properties. Thoroughly read this manual to

fully understand handling of the unit.

-Keep this User's Guide with the unit to see whenever it is necessary.

-Make sure to provide this User's Guide along with the unit to a third party.

856-129409-460-A

－i－

 Handling of laser product

When the Fibre Chanel drive is installed, class 1 laser product is used in this product.

1 Klassenlaserprodukt wird zu der Zeit des Einsatzes von einem Fibre Chanel-Antrieb mit diesem Produkt

benutzt.

 Japanese acceptance statement

 Chinese acceptance statement

 Taiwan acceptance statement

 WEEE Disposing of your used NEC product

In the European Union

EU-wide legislation as implemented in each Member State requires that used

electrical and electronic products carrying the mark (left) must be disposed of

separately from normal household waste. This includes tape library or electrical

components, such as tape drive, AC power supply.

When you dispose of such products, please follow the guidance of your local

authority or ask the shop where you purchased the product, or if applicable,

follow applicable legislation or agreement you may have.The mark on electrical

and electronic products may only apply to the current Europian Union Menber

States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the

European Union, please contact your local authority and ask for the correct

method of disposal.

－ii－

 FCC acceptance statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

 ICES acceptance statement

Industry Canada Class A Emission Compliance Statement/Avis de conformité à la réglementation

d`Industrie Canada:

CAN ICES-3(A) / NMB-3(A)

 Other

Under the EN ISO 7779 standard, the maximum noise level is 70 decibels.

 RoHS Compliance

This product complies with the EU's "Restriction of the use of certain hazardous substances in

electrical and electronic equipment" (RoHS).

Türkiye Cumhuriyeti:EEE Yönetmeliğine Uygundur

Complying with “CIRCULAR, No.30/2011/TT-BCT(Hanoi, August 10 2011), Temporary regulations

on content limit for certain hazardous substances in electrical products”

－iii－

Safety Precautions

Before use, In order to use the product safely and correctly, be sure to read over this book, please handle it

properly.

This product has been designed with sufficient safety. In case of improper use of this product, the operator

may be injured and damage to property may result. After reading this manual, store it for future reference if

necessary.

Follow the instructions in this Guide for your safety to use the product.

The product contains components with possible danger, hazards that may cause by ignoring warnings, and

preventive actions against such hazards.

This product contains components with potential hazards, which are marked with a warning label placed on

or arount those components

In this Guide or warning labels, "WARNING" or "CAUTION" is used to indicate a degree of danger. These

terms are defined as follows:

Indicates the presence of a hazard that may result in death or serious

personal injury if the instruction is ignored.

Indicates the presence of a hazard that may cause minor personal injury,

including burns, or property damage if the instruction is ignored.

Precautions and notices against hazards are presented with one of the following three symbols. The

individual symbols are defined as follows:

SYMBOL

MEAN

This symbol indicates the presence of a hazard if the instruction is ignored. An image in

the symbol illustrates the hazard type. (Attention)

This symbol indicates prohibited actions. An image in the symbol illustrates a particular

prohibited action. (Prohibited Action)

This symbol indicates mandatory actions. An image in the symbol illustrates a mandatory

action to avoid a particular hazard. (Mandatory Action)

－iv－

(Example)

Disconnect the power cord(s) before installing or removing the product.

Make sure to power off the product and disconnect the power cord(s) from a power outlet

before installing/removing the server. All voltage is removed only when the power cords

are unplugged.

Attentions