Installation Method #2:
1.
x4
2.
3.
3.
4.
5.
6.
8.
7.
x4
N
L
Installation steps:
1. unscrew ceiling bracket from ceiling plate
2. drill a hole on the ceiling bracket for cables going
through ( this step can be skipped for method #1)
3. mount ceiling bracket onto the ceiling with
accessory 2 and 3
4. put cable through the ceiling plate holes and fasten
from the back of ceiling plate with accessory 4,5 and 6
5. fasten cable from front side of ceiling plate with
accessory 7,8 and 9
6. connect pendant shade or spot (exclude in packaging)
to the cable
7. connect all wires with terminal blocks, accessory 1
8. screw ceiling plated to ceiling bracket tight