Laser ALC-KCUTE User manual

User Manual

Alarm Clock with Night Light

ALC-KCUTE

SPK-ST40-972

Thank you

for your purchase!

Laser Corporation is 100% Australian owned &

operated. To get the most out of your product

please read the user manual carefully and keep

for future use.

For specific information relating to your product

such as Spare Parts, FAQs, Warranty claims, and

more, please scan the following QR code:

WHAT’S IN THE BOX

• Alarm Clock with Night Light

• Ear Attachment

• Charging Cable

• User Manual

Temperature Range:

Time Format:

-20°C – 50°C or

-4°F – 122°F

12 & 24HR

Charging Input: DC 3.5V

Charging Time:

Standby Time:

3 hours

Battery: 3.7V, 1200mAh

9 – 200 hours

(dependant on

LED light use)

Dimensions: 79 x 66 x 82mm

Weight: 150g

SPECIFICATIONS

CONTROLS

Caution: For accurate temperature

readings please do not obstruct the

sensor.

input

Up

Down

4 8

3

2

1

5 7

6

CONTROLS

Continued...

Tap to turn light on/off.

Double tap when light is

off to enter countdown

timer mode.

Double tap when light is

on to check light timer

progress bar.

After alarm rings tap

to snooze.

-

1.

Light/

Snooze

Used to take temperature

readings.

Used for speaker output.

-

2.

Speaker

/Temp

Sensor

Insert a small object to

reset the clock to factory

settings.

3.

Reset

CONTROLS

Continued...

Tap to display the date.

The date will be displayed

for a few seconds before

switching back to

time display.

Press and hold to enter

time setting mode.

-

4.

Time

Setting

Tap to display the four

alarm groups.

Double tap to turn the

alarm on/off.

Press and hold to enter

alarm setting mode.

Plug the included

charging cable to

recharge the device.

5.

Alarm

Setting

6.

DC 3.5V

Charging

Input

CONTROLS

Continued...

Tap to increase value

when setting time, alarm,

and light timing.

-

7.

Up

Tap to decrease value

when setting time, alarm,

and light timing.

8.

Down

DISPLAY

CHARGING

Light time progress bar Day display zone

OPERATING

INSTRUCTIONS

• Ensure the unit is powered on and

in normal display mode.

Setting Time & Date

• Press and hold the “Time Setting”

button to enter time setting mode.

• Press the “Up” or “Down” button

to switch between 12/24HR time.

• Tap the “Time Setting” button to

confirm the value and move to the

next field.

• Adjust the values by pressing the

“Up” or “Down” button.

• The field sequence is as follows:

Hour > Minute > Year > Month >

Date > Temperature Unit.

OPERATING

INSTRUCTIONS

• Tap the “Time Setting” button to

confirm and move to the next field

• After adjusting the temperature unit,

tap the “Time Setting” button to finish

setting the time & date.

• On the temperature unit screen tap

the “Up” or “Down” button to switch

between Celsius and Fahrenheit.

Continued...

OPERATING

INSTRUCTIONS

• Ensure the unit is powered on and

in normal display mode.

Setting the Alarm

• Press and hold the “Alarm Setting”

button to enter alarm setting mode.

• Press the “Up” or “Down” button

to turn the alarm on/off.

• Tap the “Alarm Setting” button to

confirm and move to the next field.

• Adjust the values by pressing the

“Up” or “Down” button.

• Tap the “Alarm Setting” button to

confirm and move to the next field.

• The field sequence is as follows:

Hour > Minute > Day.

Continued...

OPERATING

INSTRUCTIONS

• After setting one alarm the unit will

prompt you to enter a second alarm.

Repeat the previous steps to set

another alarm or press the “Up” or

“Down” button to turn alternative

alarm off. You can set up to 4 alarms.

• After setting the alarm/s tap the

“Alarm Setting” button to finish

setting the alarm.

Continued...

OPERATING

INSTRUCTIONS

• After the alarm rings, tap the

“Light/Snooze” button to enter

snooze mode.

• In snooze mode the alarm will ring

again after 5 minutes. Snooze will

continue every 5 minutes until the

alarm is turned off.

• To turn the alarm off tap the

“Alarm Setting” button during the

alarm sound.

Snooze:

Continued...

OPERATING

INSTRUCTIONS

• When the light is off double tap the

“Light/Snooze” button to enter/exit

countdown timer mode.

• Press the “Up” or “Down” button to

select the time range between 0 – 99

minutes.

• After setting a value, tap the

“Light/Snooze” button to start

the countdown.

• When the countdown has finished

the alarm will sound.

• Tap the “Light/Snooze” button to

stop the alarm.

Countdown Timer:

Continued...

OPERATING

INSTRUCTIONS

• When the light is on double tap the

“Light/Snooze” button to enter light

timer mode.

• Press the “Up” or “Down” button

to select the time range between

10 – 60 minutes.

• The countdown starts after

5 seconds. Once reached the

light will turn off.

• Tap the “Light/Snooze” button to

exit light timer mode.

Light Timer:

Continued...

TROUBLESHOOTING:

• Check battery level and charge

as required.

• If the alarm is in snooze mode it

will sound every 5 minutes.

• Try plugging the USB power cable

into an alternative power source such

as a USB wall adapter. A computer

or laptop port may not provide sufficient

current to power/charge the clock.

No Power:

The Alarm keeps sounding:

• To turn the alarm off instead of

snoozing tap the “Alarm Setting”

button during the alarm sound.

• Check the number of alarms you

have set. You can set up to 4 alarms.

www.laserco.com.au

Check us out at

www.youtube.com/lasercoau

Visit our website

Laser ALC-KCUTE User manual

Related papers

Other documents