Laser ALC-KCUTE User manual

ALC-KCUTE
Laser
Brand
Laser
Model
ALC-KCUTE
Category
Alarm clocks
Type
User manual

Laser ALC-KCUTE is a versatile and user-friendly alarm clock with a night light, designed to enhance your daily routine. It features a countdown timer, light timer, and multiple alarm settings for added convenience. The easy-to-read display shows time, date, temperature, and alarm status. With adjustable brightness levels, you can customize the night light to your preference. The compact size and sleek design make it a perfect addition to any bedside table or desk. Start your day right with Laser ALC-KCUTE, your reliable alarm clock and night light companion.

Laser ALC-KCUTE is a versatile and user-friendly alarm clock with a night light, designed to enhance your daily routine. It features a countdown timer, light timer, and multiple alarm settings for added convenience. The easy-to-read display shows time, date, temperature, and alarm status. With adjustable brightness levels, you can customize the night light to your preference. The compact size and sleek design make it a perfect addition to any bedside table or desk. Start your day right with Laser ALC-KCUTE, your reliable alarm clock and night light companion.

User Manual
Alarm Clock with Night Light
ALC-KCUTE
SPK-ST40-972
Thank you
for your purchase!
Laser Corporation is 100% Australian owned &
operated. To get the most out of your product
please read the user manual carefully and keep
for future use.
For specific information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:
WHAT’S IN THE BOX
• Alarm Clock with Night Light
• Ear Attachment
• Charging Cable
• User Manual
Temperature Range:
Time Format:
-20°C – 50°C or
-4°F – 122°F
12 & 24HR
Charging Input: DC 3.5V
Charging Time:
Standby Time:
3 hours
Battery: 3.7V, 1200mAh
9 – 200 hours
(dependant on
LED light use)
Dimensions: 79 x 66 x 82mm
Weight: 150g
SPECIFICATIONS
CONTROLS
Caution: For accurate temperature
readings please do not obstruct the
sensor.
input
Up
Down
4 8
3
2
1
5 7
6
CONTROLS
Continued...
Tap to turn light on/off.
Double tap when light is
off to enter countdown
timer mode.
Double tap when light is
on to check light timer
progress bar.
After alarm rings tap
to snooze.
-
-
-
-
1.
Light/
Snooze
Used to take temperature
readings.
Used for speaker output.
-
-
-
2.
Speaker
/Temp
Sensor
Insert a small object to
reset the clock to factory
settings.
3.
Reset
CONTROLS
Continued...
Tap to display the date.
The date will be displayed
for a few seconds before
switching back to
time display.
Press and hold to enter
time setting mode.
-
-
-
-
-
-
4.
Time
Setting
Tap to display the four
alarm groups.
Double tap to turn the
alarm on/off.
Press and hold to enter
alarm setting mode.
Plug the included
charging cable to
recharge the device.
5.
Alarm
Setting
6.
DC 3.5V
Charging
Input
CONTROLS
Continued...
Tap to increase value
when setting time, alarm,
and light timing.
-
-
7.
Up
Tap to decrease value
when setting time, alarm,
and light timing.
8.
Down
DISPLAY
CHARGING
Light time progress bar Day display zone
OPERATING
INSTRUCTIONS
• Ensure the unit is powered on and
in normal display mode.
Setting Time & Date
• Press and hold the “Time Setting”
button to enter time setting mode.
• Press the “Up” or “Down” button
to switch between 12/24HR time.
• Tap the “Time Setting” button to
confirm the value and move to the
next field.
• Adjust the values by pressing the
“Up” or “Down” button.
• The field sequence is as follows:
Hour > Minute > Year > Month >
Date > Temperature Unit.
OPERATING
INSTRUCTIONS
• Tap the “Time Setting” button to
confirm and move to the next field
• After adjusting the temperature unit,
tap the “Time Setting” button to finish
setting the time & date.
• On the temperature unit screen tap
the “Up” or “Down” button to switch
between Celsius and Fahrenheit.
Continued...
OPERATING
INSTRUCTIONS
• Ensure the unit is powered on and
in normal display mode.
Setting the Alarm
• Press and hold the “Alarm Setting”
button to enter alarm setting mode.
• Press the “Up” or “Down” button
to turn the alarm on/off.
• Tap the “Alarm Setting” button to
confirm and move to the next field.
• Adjust the values by pressing the
“Up” or “Down” button.
• Tap the “Alarm Setting” button to
confirm and move to the next field.
• The field sequence is as follows:
Hour > Minute > Day.
Continued...
OPERATING
INSTRUCTIONS
• After setting one alarm the unit will
prompt you to enter a second alarm.
Repeat the previous steps to set
another alarm or press the “Up” or
“Down” button to turn alternative
alarm off. You can set up to 4 alarms.
• After setting the alarm/s tap the
“Alarm Setting” button to finish
setting the alarm.
Continued...
OPERATING
INSTRUCTIONS
• After the alarm rings, tap the
“Light/Snooze” button to enter
snooze mode.
• In snooze mode the alarm will ring
again after 5 minutes. Snooze will
continue every 5 minutes until the
alarm is turned off.
• To turn the alarm off tap the
“Alarm Setting” button during the
alarm sound.
Snooze:
Continued...
OPERATING
INSTRUCTIONS
• When the light is off double tap the
“Light/Snooze” button to enter/exit
countdown timer mode.
• Press the “Up” or “Down” button to
select the time range between 0 – 99
minutes.
• After setting a value, tap the
“Light/Snooze” button to start
the countdown.
• When the countdown has finished
the alarm will sound.
• Tap the “Light/Snooze” button to
stop the alarm.
Countdown Timer:
Continued...
OPERATING
INSTRUCTIONS
• When the light is on double tap the
“Light/Snooze” button to enter light
timer mode.
• Press the “Up” or “Down” button
to select the time range between
10 – 60 minutes.
• The countdown starts after
5 seconds. Once reached the
light will turn off.
• Tap the “Light/Snooze” button to
exit light timer mode.
Light Timer:
Continued...
TROUBLESHOOTING:
• Check battery level and charge
as required.
• If the alarm is in snooze mode it
will sound every 5 minutes.
• Try plugging the USB power cable
into an alternative power source such
as a USB wall adapter. A computer
or laptop port may not provide sufficient
current to power/charge the clock.
No Power:
The Alarm keeps sounding:
• To turn the alarm off instead of
snoozing tap the “Alarm Setting”
button during the alarm sound.
• Check the number of alarms you
have set. You can set up to 4 alarms.
www.laserco.com.au
Check us out at
www.youtube.com/lasercoau
Visit our website
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Laser ALC-KCUTE User manual

ALC-KCUTE
Laser
Brand
Laser
Model
ALC-KCUTE
Category
Alarm clocks
Type
User manual

Laser ALC-KCUTE is a versatile and user-friendly alarm clock with a night light, designed to enhance your daily routine. It features a countdown timer, light timer, and multiple alarm settings for added convenience. The easy-to-read display shows time, date, temperature, and alarm status. With adjustable brightness levels, you can customize the night light to your preference. The compact size and sleek design make it a perfect addition to any bedside table or desk. Start your day right with Laser ALC-KCUTE, your reliable alarm clock and night light companion.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents