2. Crystorama
  3. 2264-AG-LED

Crystorama 2264-AG-LED User manual

  • Hello! I'm a chat assistant that has analyzed the assembly instructions for the Crystorama 2264-AG-LED light. The document details the installation procedure, including mounting the fixture, attaching the glass shade and metal frame, and replacing the LED. It also includes important details such as the fixture being damp-rated and the need for a licensed electrician for installation. I am ready to answer any questions you may have based on the document.
  • Is a bulb included?
    Is this light fixture suitable for damp locations?
    Can it be mounted horizontally?
ASSEMBLYINSTRUCTIONMODEL#2264-AG-LED
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
This fixture is Damp rated
Crystorama.com
PLASTICANCHORS
MOUNTINGPLATE
OUTLETBOXSCREW
WOODSCREWS
SCREWS
BACKPLATE
MOUNTING
SCREWS
GLASSSHADE
METALFRAME
SIDESCREW
CLIP
Howtoinstall
4.Installbackplateontothemountingplate,and
securewiththemountingscrews.
5.Placetheglassshadeinsidethemetalframe
andsecureitwiththeclips.
1.Placethemountingplateovertheoutletbox.
Marktwopointsonthewallatthecenterof
keyholeonthemountingplate.
2.Drilltwoholesatthemarkedpointsandinsert
thewallanchors.
3.Placethemountingplateovertheoutletbox
andsecureitwithoutletboxscrews.Insert
andtightentheanchorscrewsintothewall
anchorsuntilsnug.
Youwillneed1LEDModule,26Watts
Bulbincluded.
6.Installmetalframeontothebackplate,and
securewiththesidescrews.
4-1/2” 23-5/8”
12”
4”
3-1/4”
3-1/4”
12”
SIDEVIEW
FRONTVIEW
GLASSSHADE
23-3/4”
6”
3-3/4”
HOWTOREPLACELED:
REMOVEMETALFRAMEANDSCREWSTOREPLACE
PREVIOUSLED.
Itcanbemountedbothverticallyandhorizontally.
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
PartNumber
PartNumbers
A.(1)-Mountinghardware
B.(1)-Mountingplate
C.(1)-BackplateL23-5/8’’xW4-1/2’’xH3/4’’ #XRF2264AGBKP23.625IN
D.(4)-Mountingscrew
ASSEMBLYINSTRUCTIONMODEL#2264-AG-LED
F.(4)-Sidescrew
E.(1)-Glassshade#XRF2264LGLA23.75IN
Crystorama.com
A
B
C
D
E
F
G
G.(1)-Metalframe
/