2. Computers & electronics
  3. Audio & home theatre
  4. Headphones
  5. Kogan
  6. KAEC65ANCBA
KAEC65ANCBA

Kogan KAEC65ANCBA User guide

  • Hello! I'm your chat assistant, and I've reviewed the user guide for the Kogan EC-65 II Pro Active Noise Cancelling Headphones. This guide details how to use features like active noise cancellation, dual-device pairing, and both Bluetooth and wired connections. The document outlines the controls, charging, and troubleshooting tips to help you get the most out of your new headphones. Ask me any questions you have; I'm ready to help!
  • How do I turn on the headphones?
    How do I activate the active noise cancellation?
    How can I connect the headphones to my phone?
    How do I skip to the next song?
    What is the charging duration?
EC-65 II PRO ACTIVE NOISE
CANCELLING HEADPHONES
(MATTE BLACK/SILVER GREY)
KAEC65ANCBA & KAEC65ANCSA
Kogan EC-65 II Pro Active
Noise Cancelling Headphones
USB-C to USB Cable
Aux Cable (3.5mm)
Inflight Adapter
Carry Case
User Guide
COMPONENTS
No
Name
1
Volume+/Next Track
2
MFB
(Multifunction Button)
3
Volume-/Skip Backward
4
3.5mm Earphone Jack
5
Mic
6
Active Noise
Cancellation Control
7
USB-C
8
Orientation Indicator
(raised extrusion)
OVERVIEW
1. Press and hold the MFB for 2 seconds to power the headphones ON. After 5s, the
LED indicator will flash blue and red alternately indicating that pairing mode is
active. The headphones will power OFF after 5 minutes if no Bluetooth device is
connected
2. Activate Bluetooth on your phone (or other device) and set it to search for new
devices.
iPhone Settings > Bluetooth > On
Android Settings > Bluetooth > On > Scan for devices
NOTE: Menus may vary by device.
3. Select “Kogan EC65 II Pro”.
If prompted for a passcode, enter four zeros (0000) and accept the connection.
Once successfully paired, the LED indicator will flash blue.
Connecting Two Phones: Yo ur hea dp hon es can pair with two devices simultaneously. After
you connect with Phone A, turn the headphones and Bluetooth on Phone A off. Then restart
the headphones and pair with Phone B and maintain the connection with Phone B. Finally,
open Bluetooth on Phone A and select “EC65 II PRO” in the menu.
Wired connection: Use the included audio cable to connect. Bluetooth, battery, controls
and microphone are disabled automatically in AUX mode.
Noise cancellation
Press ANC button once to activate active noise cancelling. The LED will turn green.
Press once again to disable the ANC function, and the LED will switch off.
Charging
Wired charging: Plug a USB Ty p e C cable into the headphones’ charging port and connect
the other side with a USB wall charging adapter or computer. The LED indicator turns red
while charging and turns blue when fully charged.
The headphones will sound a “low battery” warning every 15 minutes when the remaining
charge is below 10%.
Avoid using the headphones whilst charging is in progress.
OPERATION
Notes:
• The headphones can only play music from one device even if two phones are
successfully connected at the same time.
• Both phones must support Bluetooth 5.0
• Do not use non-original accessories, as this may cause performance degradation
or electrical short-circuiting.
• Do not attempt to disassemble the device, as this may damage the headphones
and void the warranty.
• Do not allow children under 3 years old to play with the headphones.
• Avoid placing the product in a dusty, overheated or very cool environment.
• Wipe the headphones clean with a soft, dry cloth. Do not use solvents or
detergents.
• Place the headphones in the original package, or keep them in a safe place when
they are not in use.
Battery maintenance
• Do not attempt to remove or replace the battery.
• Do not connect the inflight adapter and audio cable to a power outlet in an
attempt to try charge the headphones. Doing so may result in an electrical short,
possible fire and irreparable damage to your headphones.
• The charging temperature of the rechargeable battery is 10 to 45ºC.
• Ensure to charge the headphones at least once per month if not being used for an
extended period.
• Battery usage time and standby time are related to specific conditions of use.
Operational time and standby time provided are only for reference.
CLEANING & CARE
Notes:
• Other Bluetooth devices will automatically save the “EC65 II PRO” information after
first-time connection. If you are unable connect to the headphones, please remove
“EC65 II PRO” from your device list, then search and reconnect to “EC65 II PRO”.
• If the headphones will not turn on, fully charge them and try again.
• Avoid excessive volume levels and take regular listening breaks to prevent aural
damage.
• Human voices (high frequency waves) and part of medium frequency wave
spectrum cannot be eliminated by the Active Noise Cancellation function.
Bluetooth Headphones
Bluetooth version
V5.0
Ta l k i n g time
50 hours
Speaker
32Ω 40mm
20-20KHz
Music playing time
50 hours
Standby time
90 days
ANC music playing time
26 hours
Frequency
2.4Hz-2.48KHz
Charge current
1A
Microphone
Sensitivity: -36±3dB
Frequency: 30-16KHz
Charge voltage
5V
ANC function
Yes
Charging time
2-3 hours
Protocol supported
HSP, HFP, A2DP and
AVRCP
Bluetooth distance
10m
Battery capacity
1050mAh
SPECIFICATIONS
Note:
The battery life of the product will vary depending on the playback volume and usage
of the ANC function:
• At 50-60% volume, with ANC disabled, battery life is ~60 hours.
• At maximum volume, with ANC disabled, battery life is ~50 hours.
• At maximum volume, with ANC enabled, battery life is ~26 hours.
Problem
Steps to Resolve
The indicator blinks red quickly
(every 2s) or continuously
Headphone battery is low – please charge as soon as
possible.
Headphones will not power on
The battery is likely drained; charge the headphones to
full and try again.
No indicator when charging
There may be no charge indications for the first few
minutes. If the battery is completely exhausted or
charged for the first time after not being used for a long
period, the indicator glows red to indicate the charging
state after a while.
No sound from headphones
• Ensure headphones are switched on.
• Ensure EC65 II PRO is the selected sound output
on your device.
• Ensure that the headphones have paired and are
connected to your device successfully.
• Leave no more than 10m of distance between the
headphones and the connected device.
• Ensure your phone is not connected to other
devices via Bluetooth.
No sound from headphones when
using a wired connection
• Make sure you insert the correct 3.5mm audio
cable and connect successfully.
Note that the headphones buttons and
microphone do not work when in wired mode.
• Double-check the headphone port on your device
to ensure the cable is connecting properly.
TROUBLESHOOTING
Problem
Steps to Resolve
Bluetooth connection is
unsuccessful
• Make sure both the headphones and smart devices
Bluetooth are open.
• Make sure the headphones enter Bluetooth pairing
mode (the indicator blinks blue).
• Tr y t o i g n o r e t h e p r e v i o u s ly connected Bluetooth
devices and empty the Bluetooth list, then search
for the headphones again.
The headphone have been paired
with device A, and you want to
pair it with Device B, but the
headphone keeps connecting
back to Device A.
You will ne ed to clear the paired devices. Press and hold
the “+” and “-” buttons simultaneously until the
headphones emit a “DI” sound. Once you hear the
sound, you may now pair a new device.
NOTES
Need more information?
We hope that this user guide
has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
/