FUNSNAP D10273 User manual

  • Hello! I have reviewed the user manual for the Capture π gimbal. This manual covers aspects like balancing your phone on the device, using different modes such as FPV and Inception, and installing the Capture2 application. I'm ready to answer any specific questions you have about using the device or the information in the manual.
  • How do I balance my phone on the gimbal?
    How do I switch to photo mode from video mode?
    How do I enter Inception mode?
    How do I enter FPV mode?
User Manual
V1.3
Contents
1
Components
2
3
Charging Port (USB type-C)
3-4 hours
3.Please make sure balance your phone.
If your phone tilts to the right, push your phone in to the left if it tilts to the left,
pull your phone out to the right.
4
Please follow the indication paper on the gimbal
4
switch to FPV mode
in the video mode, press and hold you could switch to
photo mode, press and hold again we will go back to
video mode
5
on/off
Malfunction button
6
Double press and hold: enter
7
5
Scan the QR code on the left side orsearch for "Capture2" on Google Play /
App Store then download and install it.
Triple-click the
power button to
enter Inception
mode, Triple-click
again to exit
Double-click the
the power button to
enter FPV mode,
double-click again
to exit
push the joystick left and right
can be used to control the pitch and roll of
the gimbal
8
Double press and
hold the trigger button
9
10
Wait for the gimbal turn off automatically.
When Upgrating the firmware, you should connect Internet.
11
Operation
1
2
3
(Only Support Huawei
Xiao miOPPO
Double tap: switch between front and rear cameras Only for Android system
12
Allow Phone thickness
13
π
114
1. Any alterations, disassembly, repairs, or repairs not autorized by the manufacturer.
2. Failure or damage to the product caused by a failure to install, use, maintain or
store the product in accordance with the instructions.
3. Failure to provide valid proof of purchase or documents that have been forged or
altered.
4. Due to irresistible factors (such as fire, earthquake, flood etc. ) causing failure or
damage.
5. Other failures caused by non-product quality related events.
6. In the event of damaged, obliterated or on recognizable labels, serial numbers,
waterproof marks, dissembling proof marks.
The Following Conditions Are Not Covered By The Warranty:
115
/