2. Baldwin
  3. MP001.003
MP001.003

Baldwin MP001.003 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Baldwin MP001.003 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MULTI-POINT
INSTALLATION INSTRUCTIONS
SPRINGFIELD TRIM SHOWN
SEE HARDWARE
CATALOG FOR HOLE SPACING
Entrance American Cylinder Function Exploded View
INTERIOR TRIM
LOCK BODY
SPINDLE
POSITION NOTCHES
TOWARDS DOOR
EXTERIOR
THREADED
SCREW POSTS
SEE NOTE
PRESS-IN
BUSHINGS
LEVER SET SCREWS
ALIGN WITH
SPINDLE GROOVE
EXTERIOR TRIM
LOCK
CYLINDER
CYLINDER
BRACKET
BRACKET
SCREWS
INTERIOR #8
MACHINE SCREWS
DRILL THROUGH 5/16”
SEE NOTE
Lock Cylinder Note: Shown is the lever on the top of the lock cylinder. The lever may be on
the bottom, depending on the lock.
#8 Machine Screws Note: Proper trim alignment requires installing the spindle and levers
before completely securing the #8 screws.
Threaded Screw Posts Note: Length may need to be cut down to accomodate different
door manufacturers’ hole pattern.
©2007 BALDWIN HARDWARE CORPORATION, READING, PA
CYLINDER PIN
HOUSING FACING
UP. SEE NOTE
RECOMMENDED CYLINDER
ORIENTATION
PK 5903 (10/07)
MULTI-POINT
INSTALLATION INSTRUCTIONS
SPRINGFIELD TRIM SHOWN
SEE HARDWARE
CATALOG FOR HOLE SPACING
Patio American Cylinder Function Exploded View
INTERIOR TRIM
LOCK BODY
SPINDLE
POSITION NOTCHES
TOWARDS DOOR
EXTERIOR
THREADED
SCREW POSTS
SEE NOTE
PRESS-IN
BUSHINGS
LEVER SET SCREWS
ALIGN WITH
SPINDLE GROOVE
EXTERIOR TRIM
INTERIOR #8
MACHINE SCREWS
DRILL THROUGH 5/16”
SEE NOTE
Turn Knob Note: Shown is the lever on the top of the turn knob. The lever may be on the
bottom, depending on the lock.
#8 Machine Screws Note: Proper trim alignment requires installing the spindle and levers
before completely securing the #8 screws.
Threaded Screw Posts Note: Length may need to be cut down to accomodate different
door manufacturers’ hole pattern.
TURN KNOB
SEE NOTE
©2007 BALDWIN HARDWARE CORPORATION, READING, PA
PK 5903 (10/07)
/